Micron NetFrame 5200 Series Manuale utente
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
Information in this document is provided in connection with Micron products. No license, express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document. Except as provided in Micron’s Terms and Conditions of Sale for such products, Micron
assumes no liability whatsoever, and Micron disclaims any express or implied warranty, relating to sale and/or use of Micron products including
liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual
property right. Micron products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for
any other application in which the failure of the Micron product could create a situation where personal injury or death may occur. Micron may
make changes to specifications and product descriptions at any time, without notice. No part of this document may be copied or reproduced in
any form or by any means without prior consent of Micron.
† Third party brands and names are property of their respective owners.
Copyright © 1999, Intel Corporation. All Rights Reserved.
Copyright © 1999, Micron Electronics, Inc. All Rights Reserved.
4XLFN6WDUW*XLGH1HW)5$0(6HULHV6HUYHU
Micron Electronics, Inc. 3
NetFRAME 5200 Series Server
Quick Start Guide
WARNING
7RDYRLGSHUVRQDOLQMXU\ZKHQXQSDFNLQJWKHVHUYHUXVHRQO\D
PHFKDQLFDODVVLVWXQLWWROLIWLWRIIWKHVKLSSLQJSDOOHW
7KHVHUYHUFRQILJXUDWLRQZHLJKVDERXWNJOEV'R127
DWWHPSWWROLIWRUPRYHWKHVHUYHUE\WKHKDQGOHVRQWKHSRZHU
VXSSOLHV
7DEOHRI &RQWHQWV
Important Information about the Product Shipment
Selecting a site ....................................... 4
Box Contents.......................................... 4
After unpacking the server...................... 5
Installing the server................................. 5
Back Panel Connectors .......................... 6
Connecting the keyboard, mouse, monitor,
and printer........................................ 6
Chassis Description................................ 7
&KDVVLV)URQW&RQWUROVDQG,QGLFDWRUV
&KDVVLV6LGH9LHZ
Removing the Access Cover................... 8
Opening the Subchassis and Electronics
Bay .................................................. 9
Using the System Setup Utility.............. 10
Power-on self test ................................. 11
Server Management.............................. 12
Turning on the monitor and server........ 12
Initial System Startup............................ 12
What is on the MCRC CD..................... 13
Technical Support................................. 14
Problem Solving.................................... 14
Customer Service ................................. 14
To obtain Accounting information.......... 14
To obtain Order Status..........................15
For information regarding Refunds and
Returns .......................................... 15
How To Contact Micron Electronics, Inc.15
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
,PSRUWDQW,QIRUPDWLRQDERXWWKH3URGXFW6KLSPHQW
Congratulations on the purchase of your Micron NetFRAME 5200 Series Server! Micron Electronics, Inc.
is proud to be your provider of high performance, quality server products.
Selecting a site
The server operates reliably within the specified environmental limits. Choose a site that is near a
grounded AC power outlet with 100 - 120 V~ available.
CAUTIONS
(QVXUH7KH3RZHU6HUYLFH&RQQHFWLRQ,V7KURXJK$3URSHUO\*URXQGHG
3URSHU9ROWDJH2XWOHW
✏NOTE
)RULQWHUQDWLRQDOVLWHVWKLVPHDQVDJURXQGHGSRZHURXWOHWDSSOLFDEOHIRU
WKHHOHFWULFDOFRGHRIWKHUHJLRQ
•Clean and dust-free.
•Well ventilated and away from sources of heat.
•Isolated from strong electromagnetic fields and electrical noise caused by electrical
devices such as air conditioners, large fans, large electric motors, radio and TV
transmitters, and high frequency security devices.
•Spacious enough to provide sufficient room behind and around the server so that you can
remove AC power from it by unplugging the power cord from each power supply or wall
outlet.
•Away from sources of major vibration or physical shock.
•Micron recommends that the Server be connected to an Uninteruptable Power Supply
(UPS) sufficient to allow operations to continue until the Server can be properly Shut
Down or allow power transfer to a Back-Up Generator.
Box Contents
1. Keyboard.
2. LANDesk Server Manager.
3. Micron Customer Resource Center software CD
4. Mouse and mouse pad.
5. Power Cords.
6. The Server.
7. Miscellaneous: Software, Product Bulletins.
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
After unpacking the server
Inspect the shipping box for evidence of mishandling during transit. If the shipping box is damaged,
photograph it for reference. After removing the contents, keep the damaged box and the packing
materials. If the contents appear damaged, file a damage claim with the carrier immediately.
Save the shipping boxes and packing materials to repackage the server in the event you decide to move it
to another site.
Installing the server
WARNING
29(5&855(173527(&7,217KHVHUYHULVGHVLJQHGIRUDQ$&OLQH
YROWDJHVRXUFHZLWKXSWRDPSHUHVRIRYHUFXUUHQWSURWHFWLRQ,I
WKHSRZHUV\VWHPIRUWKHHTXLSPHQWLVLQVWDOOHGRQDEUDQFKFLUFXLW
ZLWKPRUHWKDQDPSHUHVRISURWHFWLRQ\RXPXVWSURYLGH
VXSSOHPHQWDOSURWHFWLRQIRUWKHVHUYHU,IPRUHWKDQRQHVHUYHULV
LQVWDOOHGWKHSRZHUVRXUFHIRUHDFKVHUYHUPXVWEHIURPDVHSDUDWH
EUDQFKFLUFXLW7KHRYHUDOOFXUUHQWUDWLQJRIDVHUYHUFRQILJXUHG
ZLWKWKUHHSRZHUVXSSOLHVLVOHVVWKDQDPSHUHV
WARNING
$92,',1-85<7KHVHUYHUFRQILJXUDWLRQZHLJKVDERXWNJ
OEV7RDYRLGSHUVRQDOLQMXU\ZHUHFRPPHQGWKDWWZRSHRSOHOLIW
DQGLQVHUWWKHVHUYHULQWRWKHVOLGHDVVHPEOLHVLQWKHHTXLSPHQW
UDFN
CAUTIONS
7HPSHUDWXUH:KHQLQVWDOOHGLQDQHTXLSPHQWUDFNWKHRSHUDWLQJWHPSHUDWXUH
RIWKHVHUYHUPXVWQRWJREHORZ&)RUULVHDERYH&)
([WUHPHIOXFWXDWLRQVLQWHPSHUDWXUHFDQFDXVHDYDULHW\RISUREOHPVLQWKH
VHUYHU
9HQWLODWLRQ7KHHTXLSPHQWUDFNPXVWSURYLGHDLUIORZWRWKHIURQWRIWKHVHUYHU
WRPDLQWDLQVXIILFLHQWFRROLQJYHQWLODWLRQWRH[KDXVWDPD[LPXPRI%78V
SHUKRXU7KHUDFNVHOHFWHGDQGWKHYHQWLODWLRQSURYLGHGPXVWEHVXLWDEOHWRWKH
HQYLURQPHQWLQZKLFKWKHVHUYHUZLOOEHXVHG
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
Back Panel Connectors
OM08498
BD E I J
A
H
CFG
Figure 1. Back Panel Connectors
A. Mouse Connector F. Green NIC LED
B. Keyboard Connector G. Orange NIC LED
C. Parallel Port Connector H. Network Connector
D. Serial Port Connector (COM1) I. USB Connectors
E. Serial Port Connector (COM2) J. Video Connector
Table 1. NIC LEDs
NIC LED Color If it’s on If it’s blinking If it’s off
Orange 100 MBps network
connection. NA 10 MBps network connection.
Green Linked to network no
network traffic. Linked to network, sending
or receiving data. Not linked to network.
Connecting the keyboard, mouse, monitor, and printer
Keyboard Connect the signal cable of a PS/2†-compatible keyboard to the keyboard port on the server
I/O panel.
Mouse Connect the signal cable of a PS/2-compatible mouse to the mouse port on the server I/O
panel.
Monitor Connect the signal cable of the video monitor to the Super VGA†port on the server I/O panel.
Printer Connect the signal cable of a PS/2-compatible printer to the parallel port on the server I/O
panel.
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
Chassis Description
The server chassis is designed specifically for the Intel® C440GX+ Server Board.
Chassis Front Controls and Indicators
OM07705
D
E
F
J
I
G
H
ABC
K
Figure 2. Front Controls and Indicators
A. External drive bay (5¼-inch)
B. Diskette drive bay; diskette drive shown installed (not included)
C. Power On/Off button
D. Button reserved for future use
E. Reset button
F. Front panel LEDs (Top to bottom: top five are power on, reserved for future use, HDD
activity, fan failure, power supply failure; bottom six are hard-drive failure LEDs, labeled 0-5)
G. NMI (Non-Maskable Interrupt) button
H. Security latch
I. EMI shield latch
J. Internal drive bays (3½-inch). Five are shown installed, but maximum capacity is six
K. Hot swap bay door
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
Chassis Side View
OM07715
I H
D
ABCE F G
K
J
Figure 3. Chassis Side View
A. Front swing-out subchassis B. Diskette drive*
C. Main chassis D. Power share board
E. Power supply(s) F. Server board*
G. Lift-out electronics bay H. Foam fan housing
I. Foam fan housing cover J. SCSI hard drive bay
K. 5.25-inch device bay
* Items shown may not be included in the chassis.
Removing the Access Cover
You need to remove the access cover, and in some cases the front bezel, to reach components inside the
chassis. Facing the front of the chassis, the access cover is on the right side for pedestal-mounted (tower)
servers and on the top for rack-mounted servers.
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Turn off all peripheral devices connected to the server.
3. Turn power to the server OFF by using the power on / off switch on the front panel AND unplug all
AC power cords.
4. Label and disconnect all peripheral cables attached to the I/O panel.
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
5. Remove and save the three screws from the back of the access cover; you will need them later to
reattach the cover.
6. Place the fingertips of your right hand under the built-in handle on the back of the cover.
A rounded, rectangular depression in the front middle of the access cover serves as another
handle.
7. Using an even pull, slide the cover backward, about an inch, until it stops.
8. Pull the entire cover outward, straight away from the chassis, to disengage the rows of tabs from
the notches in the top and bottom edges of the chassis. Set the cover aside.
OM07707
Figure 4. Removing the Access Cover
Opening the Subchassis and Electronics Bay
The chassis is comprised of three parts: the main chassis, a swing-out subchassis at the front, and a
swing-out subchassis, called the electronics bay, at the rear. To access components in some instances,
you must swing away and/or completely remove the subchassis and electronics bay.
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Remove the access cover.
3. Remove the two screws on the top and bottom edges of the chassis (Figure 5, A). These screws
attach the front subchassis and the electronics bay to the main chassis.
CAUTION
<RX0867GLVFRQQHFWDOOFDEOLQJWRWKHHOHFWURQLFVED\EHIRUH
SLYRWLQJUHPRYLQJWKHED\)DLOXUHWRGRVR&$15HVXOW,Q
6HULRXV'DPDJH7R6\VWHP&RPSRQHQWV
1HW)5$0(6HULHV6HUYHU4XLFN6WDUW*XLGH
0LFURQ(OHFWURQLFV,QF
4. Pivot the front subchassis left, away from the main chassis, until it stops (Figure 5, B).
5. Disconnect all cabling to the electronics bay.
6. Using the vertical edge of the electronics bay as a handle, pivot the bay right, away from the main
chassis, until it stops (Figure 5, C).
7. If necessary, completely remove the subchassis and electronics bay: pivot the bays outward until
the two pins that function as hinges for the bays slide out of their slots. Set the bays aside.
OM07701
BC
A
Figure 5. Opening the Subchassis and Electronics Bay
A. Screws
B. Front swing-out subchassis
C. Electronics bay
Using the System Setup Utility
The System Setup Utility (SSU) is on the Micron Customer Resource Center (MCRC) software CD
shipped with the server board. The SSU provides a graphical user interface (GUI) over an extensible
framework for server configuration. For the NF5200 systems, the SSU framework supports the following
functions and capabilities:
•Assigns resources to baseboard devices and add-in cards prior to loading the operating
system (OS)
•Allows you to specify boot device order and system security options
•Permits viewing and clearing of the system’s critical event log
•Allows troubleshooting of the server when the OS is not operational
•Provides a system level view of the server’s I/O devices
Indice
Altri manuali Micron Server
