Microsemi FlashPro Lite Manuale tecnico

© 2013 Microsemi Corporation. All rights reserved.

FlashPro Lite Device Programmer

Quickstart Card

This quickstart card applies only to the FlashPro Lite device programmer.

Kit Contents

Software Installation

If you are already using Libero®System-on-Chip (SoC) software, you have the FlashPro software

installed as part of this software. If you are using the FlashPro Lite device programmer for

standalone programming or on a dedicated machine, download and install the latest release of the

FlashPro software from the Microsemi SoC Products Group website. The installation will guide you

through the setup. Complete the software installation before connecting the FlashPro Lite device

programmer to your PC. The installation will ask you “Will you be using FlashPro Lite or FlashPro

programmer via parallel port?”, answer “Yes”.

Software releases: www.microsemi.com/soc/download/program_debug/flashpro.

Hardware Installation

1. Connect the programmer to a parallel printer port on your PC. Connect one end of the IEEE 1284

cable to the programmer’s connector. Plug the other end of the cable into your parallel printer

port and tighten the screws. You should not have any licensing dongles connected between the

parallel port and cable. Your port settings must be EPP or bidirectional. Microsemi also supports

ECP mode with FlashPro v2.1 software and newer.

2. Verify that you are connected to the correct parallel port on your computer. Microsemi

recommends that you dedicate a port to the programmer. Connecting to a serial port or a third-

party card can damage the programmer. This type of damage is not covered by the warranty.

3. Connect the FlashPro Lite ribbon cable to the programming header and turn the target board on.

Quantity Description

1 FlashPro Lite programmer standalone unit

1 Ribbon cable for FlashPro Lite

1 IEEE 1284 parallel port cable

50200200-1/2.13

FlashPro Lite Device Programmer Quickstart Card

Common Issues

If you see two blinking LEDs on the programmer after you have connected the programmer to the

parallel port, make sure the parallel port cable is connected firmly to the PC parallel port. For more

information, refer to the FlashPro Software and Hardware Installation Guide and the “Known

Issues and Workarounds” section of the FlashPro software release notes:

www.microsemi.com/soc/download/program_debug/flashpro.

Documentation Resources

For further FlashPro software and FlashPro Lite device programmer information, including user's

guide, installation guide, tutorial, and application notes, refer to the FlashPro software page:

www.microsemi.com/soc/products/hardware/program_debug/flashpro.

Technical Support and Contacts

Technical support is available online at www.microsemi.com/soc/support and by email at

soc_tech@microsemi.com.

Microsemi SoC Sales offices, including Representatives and Distributors, are located worldwide. To

find your local representative visit www.microsemi.com/soc/company/contact.

Indice

Altri manuali Microsemi Scheda madre

Microsemi

Microsemi VSC8514 Manuale utente

Microsemi

Microsemi PD70211EVB50FW-5 Manuale utente

Microsemi

Microsemi VSC8584 Manuale utente

Microsemi

Microsemi VSC8634 Manuale utente

Microsemi

Microsemi LX1970 Manuale utente

Microsemi

Microsemi PD-IM-7401 Manuale utente

Microsemi

Microsemi PD69208 Manuale utente

Microsemi

Microsemi LX7178 Manuale utente

Microsemi

Microsemi PD70101EVB F Series Manuale utente

Microsemi

Microsemi PD70222EVB Manuale utente

Microsemi

Microsemi FlashPro5 Manuale tecnico

Microsemi

Microsemi SmartFusion2 MSS Manuale utente

Microsemi

Microsemi PD-IM-7508 Manuale utente

Microsemi

Microsemi LX7175 Manuale utente

Microsemi

Microsemi LX2206 Manuale utente

Microsemi

Microsemi SmartFusion2 MSS Manuale tecnico

Microsemi

Microsemi ProASIC3/E Proto Kit Manuale tecnico

Microsemi

Microsemi LX23224IDB Manuale utente

Microsemi

Microsemi PD70210EVB Manuale utente

Microsemi

Microsemi SmartFusion2 MSS Manuale utente

Microsemi

Microsemi SmartFusion UG0209 Manuale utente

Microsemi

Microsemi VSC8489 Manuale utente

Microsemi

Microsemi LX8204 12 V E-Fuse Manuale utente

Microsemi

Microsemi IGLOO PLUS Starter Kit Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente