Miele HM 16-83 Manuale utente

Operating instructions

Rotary ironer

HM 16-83

To avoid the risk of accidents

or damage to the appliance it is

essential to read these instructions

carefully before installing and

using it for the first time. M.-Nr. 07 660 590

en-GB

Guide to the appliance .............................................3

Warning and safety instructions .....................................5

Caring for the environment..........................................8

Moving the ironer..................................................9

Preparing the working area ...........................................9

Before using for the first time.......................................10

Dust cover .......................................................10

Before ironing ...................................................11

Preparing the laundry ..............................................11

More advice on correct dampness..................................11

Pulling into shape and smoothing out ...............................11

Sorting........................................................11

Check that the finger guard is functioning properly. .......................12

Ironing..........................................................13

Switching on and off .............................................13

Select the temperature for ironing ..................................13

Select the roller speed ...........................................14

Feeding laundry in .................................................15

Hanging bar ...................................................15

After ironing ......................................................16

Power cut ........................................................16

Ironing tips ......................................................17

Tea towels, hand towels, handkerchiefs, serviettes etc. .................17

Table cloths ...................................................17

Duvet covers...................................................18

Maintenance and care .............................................19

Cleaning the heater plate ...........................................19

Cleaning the casing................................................19

Ironing cover .....................................................19

Replacing the ironing cover .......................................19

Problem solving guide ............................................23

After sales service ................................................24

Electrical connection..............................................25

Electrical connection U.K. ...........................................25

Technical data ...................................................26

Contents

aTemperature selector

bEmergency release

cControls

dMains connection cable

eFoot pedal switch

fIroning table

gHanging bar

hFeed-in table

iRoller

jHeater plate

kFinger guard

Guide to the appliance

Control panel

aRoller speed selector

b"On-Off" I-0 indicator light

c"On-Off" button I-0

doC"Temperature" indicator light

Guide to the appliance

To avoid the risk of accidents and

damage to the ironer please read

these instructions carefully before

using it for the first time. They

contain important information on its

safety, use and maintenance.

Keep these instructions in a safe

place and ensure that new users are

familiar with the content. Pass them

on to any future owner.

Correct application

~This ironer must only be used for

ironing articles which were washed in

water and which have a care label

stating that the article is suitable for

machine ironing.

~This ironer is not intended for use by

persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience or

knowledge, unless they are supervised

whilst using it or have been shown how

to use it correctly by a person

responsible for their safety.

Technical and electrical safety

~Before setting up the ironer, check it

for any externally visible damage.

Under no circumstances should you

use it if it has been damaged. A

damaged appliance may be

dangerous.

~If the supply cord is damaged, it

must be replaced by a Miele approved

service technician to avoid a hazard.

~Before connecting the ironer, ensure

that the connection data on the data

plate (fuse rating, voltage and

connected load) match the mains

electricity supply. If in any doubt,

consult a qualified electrician.

~The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and

where there is any doubt the household

wiring system should be inspected by a

qualified electrician. The manufacturer

cannot be held liable for damage or

injury caused by an inadequate

earthing system (e.g. electric shock).

~Do not connect the ironer to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

Warning and safety instructions

~This ironer complies with all relevant

local and national safety requirements.

Unauthorised repairs could result in

unforeseen dangers for the user, for

which Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician.

Ensure current is not supplied to the

ironer until after maintenance or repair

work has been carried out.

~Faulty components must only be

replaced by genuine Miele original

parts. The manufacturer can only

guarantee the safety of the appliance

when Miele replacement parts are

used.

~The ironer is only completely

isolated from the electricity supply

when:

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the screw-out fuse is removed (in

countries where this is applicable).

~Do not damage, remove or bypass

the safety features, fixtures and control

elements of this appliance.

~Any removable outer panels must

be back in place, and all moving or

electrical parts shielded before it is

switched on.

~This ironer may only be used in

mobile installations such as ships if a

risk assessment of the installation has

been carried out by a suitably qualified

engineer.

Correct use

~When working with the ironer always

wear close fitting clothes. Wide sleeves,

apron straps, scarves and ties etc.

could be taken in by the roller.

~Remove any rings, bracelets, or

other jewellery before starting to work.

Tie back long hair.

~When heated up there is an acute

risk of burning:

–if the heater plate is touched,

–if the foot pedal is pressed down

while fingers or hands are positioned

between the raised heater plate and

the roller.

~This ironer is not a toy! To avoid the

risk of injury do not let children play on

or near it, or with the controls. Supervise

children whilst you are using it.

~Do not drape laundry over the heater

plate when it is heated up. Fire hazard.

~Use the swing out bar.

It is designed for hanging laundry on.

After use it should be swung back out

of the way. Take care not to press down

on the bar when it is swung out. There

is a danger that this could tip the ironer

over.

~Switch the ironer off before

removing the plug from the socket.

~Do not pull it by the cable.

~Do not lay the connection cable over

the heater plate when it is heated up.

This could damage the cable - danger

of electric shock.

Use the cable holders on the ironer to

wind the cable away.

Warning and safety instructions

Using accessories

~Accessory parts may only be fitted

when expressly approved by Miele. If

spare parts or accessories from other

manufacturers are used, this will

invalidate the guarantee, and Miele

cannot accept liability.

~In countries where there are areas

which may be subject to infestation by

cockroaches or other vermin, pay

particular attention to keeping the

appliance and its surroundings in a

clean condition at all times. Any

damage which may be caused by

cockroaches or other vermin will not be

covered by the guarantee.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.

Warning and safety instructions

Disposal of the packing

material

The transport and protective packing

has been selected from materials which

are environmentally friendly for disposal

and can normally be recycled. Rather

than just throwing these materials away,

please ensure they are recycled.

Ensure that any plastic wrappings,

bags etc. are disposed of safely and

kept out of the reach of babies and

young children. Danger of suffocation!

Disposal of your old appliance

or machine

Electrical and electronic appliances /

machines often contain materials

which, if handled or disposed of

incorrectly, could be potentially

hazardous to human health and to the

environment. They are, however,

essential for the correct functioning of

your appliance or machine. Please do

not therefore dispose of it with your

household waste.

Please dispose of it at your local

community waste collection / recycling

centre or contact your Dealer for

advice. Ensure that it presents no

danger to children while being stored

for disposal.

It should be unplugged or disconnected

from the mains electricity supply by a

competent person.

Caring for the environment

The ironer is fitted with four rollers.

^Hold the ironer by the ironing table to

push it or to pull it towards you.

To overcome obstacles such as carpet

edges and doorways, but also to steer

it:

^Tilt is slightly.

Preparing the working area

You will need a height adjustable chair

and a flat surface for the ironed

laundry.

Make sure the ironer is level and secure

to prevent it rolling away from you.

Place close at hand:

– a basket with the laundry ready for

ironing to the left of the rotary ironer,

–a surface for the ironed laundry to

the right of the ironer.

Shirts, overally and blouses etc., should

be hung on coathangers immediately

after ironing.

Small items can be hung over the swing

out bar.

Keep a spray bottle of water handy for

redamping laundry if necessary.

Moving the ironer

Connection cable

The mains connection cable is wound

round a hook underneath the ironing

table.

^Unwind the cable.

Do not insert the plug into the

electrical socket yet.

Dust cover

The dust cover which protects the roller

during transit has to be removed. To

remove the dust cover:

Insert the plug in the socket and

switch the ironer on. The heater plate

will rise automatically.

Now tear the dust cover and remove

it.

^An adhesive label for the temperature

selector (see illustration) is supplied

separately. Please stick this around

the temperature selector.

Before using for the first time

Altri manuali per HM 16-83

Indice

Altri manuali Miele Ferro

Manuali Ferro popolari di altre marche

Clatronic

Clatronic DB 3703 Manuale utente

TEFAL

TEFAL FV4093Z0 Manuale utente

Gorenje

Gorenje SIH 2200 BS Manuale utente

Philips

Philips GC6012 Manuale utente

Bosch

Bosch 2 Series Manuale utente

Riffel

Riffel Catena KB-819 Manuale utente

Texi

Texi Hestia Manuale utente

Maxwell

Maxwell MW-3010 Manuale utente

TREVIDEA

TREVIDEA Girmi ST60 Manuale utente

Philips

Philips HI5914/30 Manuale utente

Primula

Primula Vapormat Manuale utente

Magio

Magio MG-541 Manuale utente

Scarlett

Scarlett SC-1334S Manuale utente

Bosch

Bosch Sensixx B22L Manuale utente

Philips

Philips GC651 Manuale utente

Vitek

Vitek VT-1247 VT Manuale utente

Cleanmaxx

Cleanmaxx 3397 Manuale utente

Philips

Philips GC800 Manuale utente