BEFORE FIRST USE
other abnormality, do not use it any more.
11. Always make sure the appliance is switched o, unplugged and cooled
down before doing any maintenance work.
12. IMPORTANT! This iron must not be left unattended while it is connected to
the supply mains and before it has cooled down.
13. Do not unplug the appliance by pulling on the cord or on the appliance.
14. Never immerse the iron, the stand, the cable or the plug in water. Never hold
them under the water tap.
15. The soleplate of the iron can become extremely hot and may cause burns
if touched. Do not allow the supply cord to come in contact with the soleplate.
16. If the supply cord is damaged, it must be replaced by qualied electrical
person only or the product must be disposed of.
17. Disconnect from mains power when lling the reservoir in the iron with
water.
18. The iron must be used and rested on a at, stable surface.
19. Always place and operate the iron on a at, solid, clean and dry surface.When
placing the iron on its stand, ensure that the surface on which the stand is placed
is stable.
20. For additional protection, this appliance should be connected to a household
residual current device (safety switch) with a rating of no more than 30mA. If
unsure consult your electrician for advice.
2
Unpack the appliance and check if all parts are there and undamaged.
should this not be the case, return the product to Kmart for replacement
The packing contains one steam iron and one ller cup.
Danger of suocation! Keep all packing materials away from children
Dispose the packaging material responsibly by using recycling facilities
available from the local council waste management service
Clean all parts before rst use. See cleaning and maintenance
Heat up the iron to its maximum temperature and iron over a piece of damp
cloth for several minutes this will burn-o any manufacturing residue
from the iron. Smoke and odour may occur for a short period during this
process, which is normal
.
.
.
.
.
