Minebea CSD-903-73 Manuale utente
1
DIGITAL INDICATOR
CC-Link Interface
CSD-903-73
Instruction Manual
EN294-1499E
2
I
Introduction
Thank you very much for your purchasing the digital Indicator, model CSD-903-73.
This instruction manual describes how to operate the device as well as noteworthy points. Note that
handling and operating the device incorrectly may result in malfunctions. Read this manual thoroughly
before use for safety and optimal results.
Keep this instruction manual in a location where it is readily accessible to end users.
This manual is intended for the technical experts to read.
When you read this instruction manual, the program basic knowledge of PLC and the CC-Link
interface are needed.
Pictograms and conventions used in this manual
This manual uses the following pictograms to indicate actions to avoid at all times, aspects requiring
caution, and other noteworthy matters.
Be sure to read the descriptions provided alongside these pictograms.
WARNING
This indicates circumstances in which incorrect handling may result in death or serious injury to
users. Avoid the actions described here at all times.
CAUTION
This indicates circumstances in which incorrect handling may result in injury to users or damage to
property.
This indicates operating or procedural precautions or restrictions.
Always read the details included here to avoid malfunctioning.
II
About the view of this book
This instruction manual explains the connection method and use of the CC-Link interface specification
of the option for CSD-903. Please see the CSD-903 instruction manual about the other functions and
a basic method of handling and notes.
CSD-903 instruction manual (DRW NO. EN294-1492*)
Moreover, please refer to the instruction manual of PLC and its CC-Link interface for the PLC program
and CC-Link.
ԂCC-Link is an abbreviation of “Control & Communication Link”
ԂThis product supports CSP+ (CC-Link Family System Profile Plus).
Please download CSP+ file from the following URL if required.
http://www.minebea-mcd.com/en/product/i-amp/csd903.html
In addition, please refer to HP of the MITSUBISHI ELECTRIC for the details of the CSP+.
III
① Divisional history
Date Instruction manual No. Details of revised point
2011/02 DRW. NO.EN294-1499 First Version
2013/11 DRW. NO.EN294-1499A
Due to ECN:FN13-02183A
Delete the statement clause from Minebea logo in the cover
page.
Change from [sequencer] to [PLC].
5-2-1. 3) Add command No.9000~9099.
Add command No.9006.
5-2-1. 4) Add ⑤Calibration error.
5-2-2. 1) Change from [Remote output] to [Remote input].
5-2-2. 2) Change from [Remote input] to [Remote output].
Add 6.Function of calibration
7-3. Change from [Initialed data setting request] to [Initialed
data setting completion].
Due to ECN:FN13-02175
8-1. Change from [Resistance externally attached.(110Ω)] to
[Resistance externally attached.]
2014/09 DRW. NO.EN294-1499B Due to ECN:FN14-02124
About the view of this book
Add [This product supports CSP+].
2016/02 DRW. NO.EN294-1499C
Due to ECN No. FN15-02117B
4-2. (4) Add the note sentence.
5-2-1. (1) Change the length of data [FINAL] from 32 bit to 24
bit. Add [BRAND CODE (8 bit)]
(2) Change the length of data [S1] from 32 bit to 24 bit. Add
BRAND CODE (8 bit)]
(3) Add [Accumulation clear of all brand].
Change to [Accumulation value (8 bit)]
Add [Accumulation value LSB of 10 digits (32 bit)]
Add [Accumulation value MSB of 10 digits (32 bit)]
4) Add [(10) Brand code]
Change the setting range of (3)Accumulation value.
Add the clause of setting error.
5-2-2. 1) Add the brand code, 2) Add the brand code.
6-11., 6-12. Add the note sentence.
Correct mis-writing and update English expression
2016/06 DRW. NO.EN294-1499D Due to ECN No, FN16-02057
Delete 'Minebea Co., Ltd. Measuring Components Business
Unit' from the front cover.
2017/08 DRW. NO.EN294-1499E Due to ECN FN17-02017
・Delete the company name in the contents.
IV
Index
Introduction .............................................................................................................................I
Pictograms and conventions used in this manual...............................................................I
About the view of this book ..................................................................................................II
1.
General..............................................................................................................................1
1-1.
Features.....................................................................................................................................1
2.
Name and function of each point ...................................................................................2
2-1.
Rear panel for CC-Link I/F........................................................................................................2
3.
Connecting method .........................................................................................................3
3-1.
Connector pin configuration for communication..................................................................3
3-2.
Notes of Connection ................................................................................................................3
4.
Setting of CC-Link connecting........................................................................................4
4-1.
Changeover to Function mode................................................................................................4
4-2.
Items of CC-Link setting ..........................................................................................................4
5.
PLC memory explanation................................................................................................6
5-1.
Address .....................................................................................................................................6
5-2.
Address map.............................................................................................................................7
6.
Function of calibration ..................................................................................................28
6-1.
Change to Calibration mode by communication.................................................................29
6-2.
Setting of scale interval .........................................................................................................29
6-3.
Setting of weighing capacity.................................................................................................30
6-4.
Setting of mass of weight......................................................................................................30
6-5.
Confirmation of ZERO stability .............................................................................................31
6-6.
ZERO calibration by weight...................................................................................................31
6-7.
ZERO calibration by numeric input.......................................................................................32
6-8.
Confirmation of SPAN stability..............................................................................................32
6-9.
SPAN calibration by weight...................................................................................................33
6-10.
SPAN calibration by numeric input ....................................................................................34
6-11.
End of calibration.................................................................................................................34
6-12.
Calibration forced finish......................................................................................................35
7.
Operation method..........................................................................................................36
7-1.
Writing the set value...............................................................................................................36
7-2.
Writing/Reading by general command .................................................................................36
V
7-3.
Shift to status where it is possible to communicate...........................................................37
7-4.
Error condition/Reset requesting flag ..................................................................................38
7-5.
CPU normal operation signal ................................................................................................38
8.
Specifications of interface............................................................................................ 39
8-1.
Specifications of CC-Link interface ......................................................................................39
8-2.
Accessories.............................................................................................................................39
1
1. General
This unit is a remote device station of CC-Link Ver.1.10.
This unit can be connected with the mastering station of CC-Link Ver.1.10.
1-1. Features
Main features for CSD-903-73 are as follows:
(1) This unit can be controlled by using remote I/O and register of the PLC, so the program volume of
the PLC can be reduced.
(2) The wiring with the PLC can be reduced.
2
2. Name and function of each point
2-1. Rear panel for CC-Link I/F
(1) Communication connector
Connector type terminal block for CC-Link interface.
Connector pin configuration for communication is as follows.
Pin No. Signal name Contents
1 DA Signal line DA side
2 DB Signal line DB side
3 DG Signal line ground
4 SLD Shield
5 FG Frame ground
※ Suitable plug : MSTB 2,5-ST-5,08 AU by PHOENIX CONTACT. ※to be attached.
※ “SLD” and “FG" are connected inside.
※ The internal circuit and photo coupler are insulated.
(2) Status LED
The communication status is expressed with four LED.
LED Name Light on Light off Light on/off
RUN ・Normal ・In the reset
・No communication －
SD ・Transmitting －－
RD ・Receiving －－
ERR ・Setting error
・CRC error
・Trouble
・Normal ・When setting changes
(2)Status LED(1) Communication connector
Indice
Altri manuali Minebea Strumento di misura
Minebea
Minebea CSD-891B Manuale utente
Minebea
Minebea CSD-892B-74 Manuale utente
Minebea
Minebea CSD-892B-73 Manuale utente
Minebea
Minebea MIS-202-PT Manuale utente
Minebea
Minebea CSD-814B Manuale utente
Minebea
Minebea CSD-709 Manuale utente
Minebea
Minebea CSD-801 Manuale utente
Minebea
Minebea CSD-904-EX Manuale utente
Minebea
Minebea CSD-401 Manuale utente
Minebea
Minebea CSD-701C Manuale utente
