EMF MeterManual (A6) V1.indd 8 2/14/18 1:41 PM
Turn the meter on with the Power ON/OFF switch.
Use the Mode Switch to select a detection mode:
•RF Mode – the detectors measures radio
frequencies in the defined range. (See
specifications.)
•LF-M Mode – the detector measures low
frequency magnetic fields
•LF-E Mode – the detector measures low
frequency electric fields.
Readings in the Yellow or Red zone, will be
accompanied by a tone; this feature may be disabled
by using the sound on/off switch.
This detector is a peak level detector, which means
that on every update it shows the maximum, or peak
level, detected since the last update. Updates are
recorded approximately 5 times a second for the
LEDs, and twice a second by the PC software.
Note: The Mito Meter is a broadband detector,
meaning it captures all signals from all sources within
the selected mode frequency range at a particular
location. For example: in RF mode, if both a Wi-Fi
router and cell phone transmit at the same time, the
meter will capture both signals and give a combined
result.
