Mitsubishi MELSEC-A A1SJ71AS92 Manuale utente

AS-i Master Module

User’s Manual

(Hardware)

A1SJ71AS92

Thank you for buying the Mitsubishi general-purpose programmable

controller MELSEC-A Series

Prior to use, please read both this manual and detailed manual

thoroughly and familiarize yourself with the product.

MODEL A1SJ71AS92-U-H-JE

MODEL

CODE 13JQ99

IB(NA)-0800122-D(1112)MEE

2000 MITSUBISHI ELECTRIC CORPORATION

-1

WARNING

CAUTION

zSAFETY PRECAUTIONS z

(Read these precautions before using.)

Before using this product, please read this manual and the relevant manuals

carefully and pay full attention to safety to handle the product correctly.

These precautions apply only to Mitsubishi equipment. Refer to the CPU

module user's manual for a description of the programmable controller system

safety precautions.

In this manual, the safety precautions are classified into two levels:

"WARNING" and " CAUTION".

Indicates that incorrect handling may cause hazardous

conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous

conditions, resulting in minor or moderate injury or

property damage.

Under some circumstances, failure to observe the precautions given under

"CAUTION" may lead to serious consequences.

Observe the precautions of both levels because they are important for personal

and system safety.

Make sure that the end users read this manual and then keep the manual in a

safe place for future reference.

-2

[DESIGN PRECAUTIONS]

WARNING

zIf a communication error occurs in the AS-i system, the input will turn OFF

from the slave having the communication error.

Output to the slave with communication error will be held or cleared

depending on the slave specifications.

The AS-i system communication error can be confirmed with the buffer

memory's List of Active Slaves (LAS) (15 to 16H, 75 to 76H) and with the

input signal Config OK (X4, X9).

Using the above information, configure an interlock circuit on the sequence

program so that the system activates safely.

There is a risk of accidents caused by incorrect outputs or incorrect

operations.

zDepending on the unit fault, the input/output could enter the ON state or

OFF state.

Provide a circuit for external monitoring for input/output signals that could

lead to major accidents.

CAUTION

zDo not bundle AS-i cable together with main circuit or power lines, or lay

them close to these lines.

As a guide, separate these lines by a distance of at least 100 mm,

otherwise malfunctions may occur due to noise.

-3

[INSTALLATION PRECAUTIONS]

CAUTION

zUse the programmable controller in an environment that conforms to the

general specifications in CPU module user's manual.

Using the programmable controller in the environments outside the ranges

stated in the general specifications will cause electric shock, fire,

malfunction, or damage to/deterioration of the product.

zDo not touch conductive parts or electronic components of the module with

your bare hands.

This could cause malfunction or failure of the module

zInsert the module fixing projection into the fixing hole in the base unit and

then tighten the module mounting screw within the specified torque. Then

tighten the module mounting screw to the specified torque. Incorrect

installation with no screws could result in malfunction, failure or fall of the

module. Tightening the screw excessively may cause fall, short circuit, or

malfunction of the module due to damage of the screw or the module.

zAlways shut off all phases of the programmable controller power supply

and AS-i power supply externally before mounting or removing the module.

Failure to shut off all phases could lead to product damage.

[WIRING PRECAUTIONS]

WARNING

zSwitch off all phases of the programmable controller power supply and AS-i

power supply outside the programmable controller before starting installing

or wiring work. There is a risk of electric shock or malfunction.

zAlways install the terminal covers enclosed with the product before turning

ON the power or operating the product after installation or wiring.

Failure to install the terminal cover could lead to electric shocks.

-4

[WIRING PRECAUTIONS]

CAUTION

zAlways confirm the products terminal layout before wiring to the module.

Incorrect wiring could lead to fires or faults.

zTighten terminal screws to the specified torque.

If a terminal screw is not tightened to the specified torque, the module may

fall out, short circuit, or malfunction. If a terminal screw is tightened

excessively, exceeding the specified torque, the module may fall out, short

circuit, or malfunction due to breakage of the screw or the module.

zMake sure that no foreign matter such as chips or wire offcuts gets inside

the module. It will cause fire, failure, or malfunction.

zAS-i cables connected to a module must always be run in a duct or held

securely using clamps.

If a cable is not run in a duct or not held securely using clamps, the cable

will sag, move, or be pulled by mistake, which will cause damage to the

module and the cable and also malfunctioning due to loose connection of

the cable.

zWhen removing the AS-i cable from a module, do not pull it out by the cable.

A cable loosen the screws that hold the cable onto the module then

remove the cable.

If the cable is pulled while it is connected to the module, the module and/or

the cable will be damaged and may malfunction due to loose connection of

the cable.

zUse applicable solderless terminals and tighten them within the specified

torque range. If any spade solderless terminal is used, it may be

disconnected when the terminal screw comes loose, resulting in failure.

-5

zCONDITIONS OF USE FOR THE PRODUCT z

(1) Mitsubishi programmable controller ("the PRODUCT") shall be used in

conditions;

i) where any problem, fault or failure occurring in the PRODUCT, if any,

shall not lead to any major or serious accident; and

ii) where the backup and fail-safe function are systematically or

automatically provided outside of the PRODUCT for the case of any

problem, fault or failure occurring in the PRODUCT.

(2) The PRODUCT has been designed and manufactured for the purpose of

being used in general industries.

MITSUBISHI SHALL HAVE NO RESPONSIBILITY OR LIABILITY

(INCLUDING, BUT NOT LIMITED TO ANY AND ALL RESPONSIBILITY

OR LIABILITY BASED ON CONTRACT, WARRANTY, TORT, PRODUCT

LIABILITY) FOR ANY INJURY OR DEATH TO PERSONS OR LOSS OR

DAMAGE TO PROPERTY CAUSED BY the PRODUCT THAT ARE

OPERATED OR USED IN APPLICATION NOT INTENDED OR

EXCLUDED BY INSTRUCTIONS, PRECAUTIONS, OR WARNING

CONTAINED IN MITSUBISHI'S USER, INSTRUCTION AND/OR SAFETY

MANUALS, TECHNICAL BULLETINS AND GUIDELINES FOR the

PRODUCT.

("Prohibited Application")

Prohibited Applications include, but not limited to, the use of the PRODUCT

in;

yNuclear Power Plants and any other power plants operated by Power

companies, and/or any other cases in which the public could be affected

if any problem or fault occurs in the PRODUCT.

yRailway companies or Public service purposes, and/or any other cases

in which establishment of a special quality assurance system is required

by the Purchaser or End User.

yAircraft or Aerospace, Medical applications, Train equipment, transport

equipment such as Elevator and Escalator, Incineration and Fuel

devices, Vehicles, Manned transportation, Equipment for Recreation and

Amusement, and Safety devices, handling of Nuclear or Hazardous

Materials or Chemicals, Mining and Drilling, and/or other applications

where there is a significant risk of injury to the public or property.

Notwithstanding the above, restrictions Mitsubishi may in its sole discretion,

authorize use of the PRODUCT in one or more of the Prohibited

Applications, provided that the usage of the PRODUCT is limited only for

the specific applications agreed to by Mitsubishi and provided further that

no special quality assurance or fail-safe, redundant or other safety features

which exceed the general specifications of the PRODUCTs are required.

For details, please contact the Mitsubishi representative in your region.

-6

Revisions

*The manual number is given on the bottom right of the top cover.

Print Date *Manual Number Revision

Apr.,2000 IB(NA)-0800122-A First edition

Jun., 2004 IB(NA)-0800122-B

Partial correction

SAFETY PRECAUTIONS, Section 3.1,

Chapter 5

Sep., 2010 IB(NA)-0800122-C

"PLC" was changed to "programmable

controller".

Partial correction

SAFETY PRECAUTIONS,

Correspondence to EMC Directives and

Low-Voltage Directives, Chapter 3, 4, 6

Addition

CONDITIONS OF USE FOR THE

PRODUCT

Dec., 2011 IB(NA)-0800122-D

Addition

SAFETY PRECAUTIONS (Chinese)

This manual confers no industrial property rights or any rights of any other kind, nor does

it confer any patent licenses. Mitsubishi electric Corporation cannot be held responsible

for any problems involving industrial property rights which may occur as a result of using

the contents noted in this manual.

2000 MITSUBISHI ELECTRIC CORPORATION

-7

CONTENTS

1. Overview ....................................................................................................... 1

2. Performance Specifications .......................................................................... 2

3. Handing ......................................................................................................... 3

3.1 Precautions for Handling.......................................................................... 3

4. Part Identification Nomenclature ................................................................... 4

5. Wiring ........................................................................................................... 5

5.1 Precautions for Wiring ............................................................................. 5

5.2 Wiring....................................................................................................... 5

6. Outline Dimension Drawings ......................................................................... 6

6.1 A1SJ71AS92............................................................................................ 6

-8

About the Manuals

The following product manuals are available. Please use this table as a

reference to request the appropriate manual as necessary.

Detailed Manual

Manual name Manual No.

(Model code)

AS-i Master Module User's Manual type A1SJ71AS92 SH-080085

(13JR15)

COMPLIANCE WITH EMC AND LOW VOLTAGE DIRECTIVES

(1) Method of ensuring compliance

To ensure that Mitsubishi programmable controllers maintain EMC and Low

Voltage Directives when incorporated into other machinery or equipment,

certain measures may be necessary. Please refer to one of the following

manuals.

yUser's manual for the CPU module used

yUser's manual (hardware) for the CPU module or base unit used

The CE mark on the side of the programmable controller indicates

compliance with EMC and Low Voltage Directives.

(2) Additional measures

To ensure that this product maintains EMC and Low Voltage Directives,

please refer to one of the manuals listed under (1).

1. Overview

This manual explains the specifications and names of each parts, etc., of the

A1SJ71AS92 model AS-i master module (abberviated as A1SJ71AS92) which

are used with AS-i system.

1) The use, cable used and installation position of the A1SJ71AS92 are

indicated on the following chart.

Use Application

The master of AS-i system Main base, Extension base I/O slot

2) Please verify the existence of the following parts after opening the

package.

a) In the case of A1SJ71LP21

Product name Quantity

AS-i Master Module A1SJ71AS92 1

3) Application CPU

A1SJCPU-S3, A1SCPU, A2SCPU, A1SJHCPU, A1SHCPU, A2SHCPU,

A2USCPU(S1), A2USHCPU-S1, Q2ASCPU(S1), Q2ASHCPU(S1),

Q02CPU-A, Q02HCPU-A and Q06HCPU-A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Mitsubishi Unità di controllo

Mitsubishi

Mitsubishi GOT MELSEC 800 Series Manuale utente

Mitsubishi

Mitsubishi MELSEC-A series Manuale utente

Mitsubishi

Mitsubishi A1S62TCRTBW-S2 Manuale utente

Mitsubishi

Mitsubishi AL-ASI-BD Manuale utente

Mitsubishi

Mitsubishi MELSEC-L Series Manuale utente

Mitsubishi

Mitsubishi MAC-588IF-E Manuale utente

Mitsubishi

Mitsubishi FR-A5ND Manuale utente

Mitsubishi

Mitsubishi MELSEC L Series Manuale utente

Mitsubishi

Mitsubishi Melsec-Q QD63P6-U-HW Manuale utente

Mitsubishi

Mitsubishi AJ71PB92D Manuale utente

Mitsubishi

Mitsubishi A1SJ71AP21 Manuale utente

Mitsubishi

Mitsubishi MELSEC A1S64AD Manuale utente

Mitsubishi

Mitsubishi QD75M1 Manuale utente

Mitsubishi

Mitsubishi MELSEC-Q QD77MS Manuale utente

Mitsubishi

Mitsubishi MELSECNET/10 A1SJ72QLP25 Manuale utente

Mitsubishi

Mitsubishi A0J2CPU Manuale utente

Mitsubishi

Mitsubishi Q68TD-G-H01 Manuale utente

Mitsubishi

Mitsubishi NZ2GF2B-60DA4 Manuale utente

Mitsubishi

Mitsubishi Q Series Manuale utente

Mitsubishi

Mitsubishi QJ71WS96 Series Manuale utente

Mitsubishi

Mitsubishi MELSEC-A Manuale utente

Mitsubishi

Mitsubishi MELSEC-A A1S68AD Manuale utente

Mitsubishi

Mitsubishi MELSEC L Series Manuale utente

Mitsubishi

Mitsubishi GOT 1000 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente