Monitech 91-00918-03 Manuale utente
M20A03-080QTMATE/080QT0744
1
M L 0 8 0 QTM A T E - C & 0 7 4 4 INSTALL GUIDE
LCD upgrade kit
FOR YOUR MODICON- PANELMATE (91-00918-03,
91-01064-00 & 91-00744-10)
M20A03-080QTMATE/080QT0744
2
IMPORTANT:
WARRANTY
Before using any MONITECH product please carefully
review this Manual as well as any additional
documentation provided with your shipment.
Attempting any of the following will void product warranty:
•unauthorized repairs or parts replacement
•inappropriate use or placement: exposing product to
liquids, harmful gases, electrical shock, physical
shock, temperatures beyond the range of -4°F to
140°F
(-20°C to 60°C)
•use of electrical voltage other than 12V 4.16A
(power supply and AC cable provided)
•Removal or modification of serial, product, or
warranty labels.
WARNING
ELECTRICAL HAZARD
DO NOT OPEN
TO AVOID ELECTRICAL SHOCK DO NOT
OPEN PRODUCT CASING. UNAUTHORIZED
REPAIRS OR PARTS REPLACEMENT ARE
PROHIBITED AND WILL VOID PRODUCT
WARRANTY. PLEASE RETURN TO
MONITECH FOR REPAIRS.
M20A03-080QTMATE/080QT0744
3
REMOVALE:
Step #1) Turn off turn off main power, turn off machine.
Step #2) Take out the monitor & controller from your machine by loosening all
surrounding bolts. Power off your controller and monitor via switch. Unplug
monitor and controller from machine.
Unplug this
Turn OFF
Monitor & Controller
M20A03-080QTMATE/080QT0744
4
Step #3) Make sure to take a picture of all your connections before unplugging
any of your connections. Unplug your video cable and keypad cable.
Step #4) Take off controller.
Step #5) Take off your CRT from your machine.
Video Cable
Keypad Connection
M20A03-080QTMATE/080QT0744
5
Step #6) Take off all bolts surrounding front frame. Then lift front frame up and
take out standoffs from front bezel.
INSTALLATION:
Step #7) Put front frame back on to the front bezel. Open the monitor that
Monitech has supplied you. Place our monitor into opening shown the holes of
the brackets should match. Use 4 bolts previously taken off the front frame to
mount our monitor to the front frame.
Nuts
Standoffs
Front Frame
4 mounting
holes
Monitech Monitor
Front Bezel
M20A03-080QTMATE/080QT0744
6
Step #8) Put back the controller into the front bezel. Open our MK105 use our
Hardware kit (MH2000) to fasten the controller to the front frame with bolts and
screws.
Step #9) Takeout MAV066A from MK105 box. Do not use any of the other
cables, those cables are only for testing the monitor on a computer. Plug-in
MAV066A to your controller as shown and plug-in VGA cable to Monitech
monitor and plug-in power jack into Monitech monitor.
MH2000
Fasten the controller
as shown
Input to your
controller
MAV066A
Output VGA Video to
Monitech Monitor
Power Jack to
Monitech Monitor
M20A03-080QTMATE/080QT0744
7
Step #10) Plug your keypad connector back in. Plug monitor and controller back
in. Turn on your control to test if monitor is working before mounting.
Step #11) If everything is alright. Turn off power to control then put front bezel
with control and Monitech monitor back onto machine then turn on main power of
your machine and turn on machine CNC machine and you're ready to go. If you
need to adjust your screen size use our user guide.
M20A03-080QTMATE/080QT0744
8
Enjoy your rejuvenated Monitor. Call us to order more HMI
replacement parts.
M20A03-080QTMATE/080QT0744
9
Keep your PANELMATE HMI’s up and
running!
ML121LLMATE -12.1" LCD
Upgrade for (Panelmate/Cutler)
with 14" CRT. Just take a picture
of your video connector
MF1775T- Touchscreen and overlay
and Plexiglas for Panelmate 1775T.
8.0" Tocushcreen.
MPC21P -LCD Panel kit for the
PanelMate 1775K
ML080MATE -8" LCD Upgrade for
(Panelmate/Cutler) with 9" CRT. Just
take a picture of your video connector
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Monitech Sistema di controllo
