Monoprice Dark Matter 44632 Manuale utente
P/N 44632
User Manual
Dark Matter™ by Monoprice™
27in IPS QHD 2560x1440p 2ms 165Hz Monitor
Preface
................................................................................................................................................................................................................
3
SAFETY NOTICE
...........................................................................................................................................................................................
3
MAINTENANCE AND CLEANING
.................................................................................................................................................
4
SPECIAL NOTES ON LCD MONITORS
.......................................................................................................................................
5
PRODUCT INTRODUCTION
.................................................................................................................................................................
7
PACKING LIST
................................................................................................................................................................................................
7
Stand Assembly and Disassembly Instructions
.............................................................................................................
8
INSTALLATION INSTRUCTIONS
.....................................................................................................................................................
9
FUNCTIONAL OPERATION SPECIFICATION
......................................................................................................................
10
TROUBLESHOOTING
.............................................................................................................................................................................
12
TECHNICAL SPECIFICATIONS
.......................................................................................................................................................
14
Preface
Every e!ort has been made to ensure that the information in this document is accurate.
However, the manufacturer and Monoprice of this product assume no responsibility for
any error, omission in this document, or use of the information contained herein.
Please preserve this manual for the life of the equipment.
Congratulations on your purchase.
SAFETY NOTICE
PRECAUTIONS
•
Please read all the instructions carefully before using this product.
•
To reduce any fire or electrical risk, do not spill any liquids into the cabinet or use
your monitor near water.
•
DO NOT REMOVE THE MONITOR'S BACK COVER. There are no user serviceable parts
inside and opening or removing covers may expose you to dangerous shock hazards
or other risks.
•
Do not place this product on a sloping or unstable cart, stand, or table, as it may fall,
causing serious damage to the monitor. Do not put anything on top of the monitor.
•
If the power supply is lost, do not try to repair it. Please contact Monoprice.
•
Before use, make sure all the cables are well plugged and not damaged. In case of
any damage, please contact Monoprice Technical Support.
•
Only the type of power source indicated on the nameplate applies to this display. If
you have any questions about the type of power source you use, please consult the
dealer of the display.
•
Use an appropriate outlet, complying with the local electrical norms.
•
Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.
•
Do not use the monitor in high-temperature, humid, dusty, or oily areas.
•
In case of a storm or prolonged non-use, unplug the screen to protect against any
overvoltage damage.
•
When disconnecting the power cord of the display or power adapter, always
remember to hold the plug instead of pulling the wire to unplug the power cord.
•
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous
voltage points, which can be harmful or fatal or may cause electric shock, fire, or
equipment failure.
•
Use a power cord that matches the AC voltage of the power outlet (100 ~ 240 V AC),
that has been approved, and that complies with the safety standard of your country.
•
The power cable connector is the primary means of detaching the system from the
power supply. The monitor should be installed close to a power outlet, which is easily
accessible.
•
Any technical issues, please contact Monoprice Technical Support.
CAUTION
: DO NOT REMOVE THE MONITOR BACK COVER. Opening or removing the
cover may expose you to dangerous voltages and other hazards.
There are no user serviceable parts inside and opening or removing covers may
expose you to dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.
MAINTENANCE AND CLEANING
•
For safety reasons, turn o!and unplug the display before cleaning.
•
Clean the panel surface with a lint-free, non-abrasive cloth. Treat stubborn stains
with a wet cloth and a gentle specific solution.
•
Avoid using cleaning products containing alcohol or acetone. Use a cleaning solution
specifically made for cleaning LCD screens. Never spray any liquid directly on the
screen. It could fall into the display and cause an electrical shock.
•
When cleaning, ensure that any liquid enters the display housing. Please make sure
only soft cloths are used for cleaning purposes. A hard cloth could damage the panel.
•
Clean the housing with a slightly humidified cloth and a gentle detergent, then wipe
it with a dry and clean cloth.
•
Do not insert anything in the unit, and never spill liquid of any kind on it.
SPECIAL NOTES ON LCD MONITORS
•
The following symptoms are normal with an LCD monitor and do not indicate a
problem.
•
Due to the nature of the fluorescent light, the screen may flicker during initial use.
Turn o!the Power Switch and then turn it on again to make sure the flicker
disappears.
•
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
•
The LCD screen has e!ective pixels of 99.99% or more. It may include blemishes of
0.01% or less such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning o!the Power
Switch for hours.
•
If the screen suddenly flashes erratically or the backlighting fails, please contact your
dealer or service center for repair. Do not attempt to repair the monitor yourself.
PRODUCT INTRODUCTION
CHARACTERISTIC
•
Adjust OSD in multiple languages.
•
Compatible with IBM VGA, Extended VGA, VESA VGA, SVGA, XGA, and SXGA Modes.
•
Wide voltage range, AC 100-240V 50/60Hz.
•
Plug and Play VESA DDC1/2B standard, compatible with Microsoft Windows
operating system.
•
Support the DDC/CI function.
PACKING LIST
Make sure your monitor package includes the following equipment:
•
Monitor (and Stand with Base)
•
Power Cord
•
Display Cable
•
User Manual
If anything is missing, please contact Monoprice Technical Support and Customer Service.
Stand Assembly and Disassembly Instructions
INSTALLATION INSTRUCTIONS
CONNECTED DISPLAY
1.
Shut down the computer and disconnect the power cable.
2.
Connect the display cable to the display connector of the computer. Connect the
other end of the display cable to the rear of the monitor.
3.
Connect the power cable to the AC power input terminal on the rear of the
monitor and plug the other end of the power cable into the nearest power socket.
4.
Turn on the power switch of the computer and the monitor. If there is an image on
the monitor, then it has been connected successfully.
Note: If power and display cables are damaged, they must be replaced immediately.
Please contact Monoprice Technical Support.
DISPLAY INTERFACE
FUNCTIONAL OPERATION SPECIFICATION
OSD OPERATION DESCRIPTION
The main menu provides controllable selection items. To adjust the screen image, tap the
navigation key and enter the menu for function adjustment according to the icon.
View Mode: Displays a quick menu that allows for selection of one of nine
video equalization presets (Standard, Game, Movie, Web, Text, MAC and
Mono).
Input Select: Displays a quick menu that allows for selection of one of three
video inputs.
Menu: Displays the full OSD menu.
Exit: Turns o!the on-screen button labels.
Once inside one of the above three menus, the button labels will change to indicate their
functions in operating the menus. The following are the various labels and their purpose.
Select: Enters the highlighted submenu or edits the selected menu entry.
Exit: Closes the OSD menu.
Back: Goes back to the previous menu or exits editing an entry.
Indice
Altri manuali Monoprice Monitor
Monoprice
Monoprice 10489 Manuale utente
Monoprice
Monoprice 15481 Manuale utente
Monoprice
Monoprice 11441 Manuale utente
Monoprice
Monoprice 12178 Manuale utente
Monoprice
Monoprice 33821 Manuale utente
Monoprice
Monoprice 30618 Manuale utente
Monoprice
Monoprice 30602 Manuale utente
Monoprice
Monoprice 13809 Manuale utente
Monoprice
Monoprice 38577 Manuale utente
Monoprice
Monoprice 31006 Manuale utente
Monoprice
Monoprice 33822 Manuale utente
Monoprice
Monoprice DARK MATTER 44710 Manuale utente
Monoprice
Monoprice CrystalPro 37922 Manuale utente
Monoprice
Monoprice 10509 Manuale utente
Monoprice
Monoprice 12077 Manuale utente
Monoprice
Monoprice 34in CrystalPro Curved 1000R VA Panel Manuale utente
Monoprice
Monoprice DARK MATTER 45548 Manuale utente
Monoprice
Monoprice 38035 Manuale utente
Monoprice
Monoprice 24659 Manuale utente
Monoprice
Monoprice Dark Matter 40778 Manuale utente
