Contents
1. Brief description 1
2. Assembly 2
3. Electrical connection 3
4. Description of function and operation 4
4.1. Programming software PM-TOOL 5
5. Setting up the device 6
5.1. Switching on 6
5.2. Standard parameterisation (flat operation level) 6
Value assignment for the triggering of the signal input
5.3. Programming interlock 9
Activation/Deactivation of the programming interlock or change into
professional or flat operation level
5.4. Extended parametersation (professional operation level) 10
5.4.1. Signal input parameters 10
Value assignment for the triggering of the signal input incl. linearisation
5.4.2. General device parameters 13
Superior device functions like Hold, Tara, min/max permanent, setpoint value function /
nominal value function, averaging, brightness control, suppression of negative offsets,
as well as the control of the digital input and keyboard layout
5.4.3. Safety parameters 19
Assignment of user and master code to lock or to receive access to defined parameter
such as analog output and alarms, etc.
5.4.4. Analog parameters 20
Analog output functions
5.4.5. Relay functions 22
Parameter for setpoint definition
5.4.6. Alarm parameters 25
Actuator and dependencies of the alarms
5.4.7. Totaliser (Volume metering) 27
Parameter for calculation of the sum function
6. Reset to factory settings 28
Reset parameters onto the delivery state
7. Alarms / Relays 29
Functional principle of the switching outputs
8. Sensor aligment 31
Diagram of functional sequences for sensors with existing adjustable resistor
9. Technical data 32
10. Safety advices 34
11. Error elimination 35
