Mounting Dream MD2212 Manuale utente
MD2212 INSTALLATION INSTRUCTION
(C3)
Max:200x200mm/8x8"
Min:50x50mm/2x2"
x3 x1
TV
1 2
Für die Installationsanweisungen auf Deutsch, siehe Seite 10~11.
Pour l'instruction en Français, veuillez vous reporter à la page 12~13.
Para las instrucciones de la instalación en Español, favor vea la página 14~15.
Per le Istruzioni in Italiano, vedi pagina 16~17.
Before getting started, let’s make sure this mount is perfect for you!
1 Is your TV VESA
equal to/greater than
50x50mm/2x2" and
equal to/less than
200x200mm/8x8"?
2 Does your TV
(including accessories)
weigh less than
22 LBS (10kg)?
4 Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:200mm/8"
MAX:
200mm/8"
Yes --- Perfect!
No --- This mount is NOT compatible.
Band Tape
2m
2M2M
5 Safety Caution
Please read this instruction carefully before installation.
● The hardware provided in the package can only use in 0.5"(12.7mm) thick or above
wooden board installation on RV.
● The wall must be capable of supporting five times the weight of the TV and mount
combined. According to the wall you're going to install, the structure of your RV may
require additional reinforcement.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Make sure to stow the TV and fully lock the mount in place before your RV is moving.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
Pencil Screwdriver Electrodrill Socket Wrench
1/2"(13mm)
3 Where can you
install this mount?
0.5"(12.7mm) thick or above wooden board
Min. 0.5"(12.7mm)
1/8"(3mm)
Wood Drill Bit
1
Parts and Hardware
WARNING:This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
M4x12mm
M6x12mm
M4/M5 M6
Washers
TV Screws
x4
x4
x4 x4
1-1 Disassemble Wall Plate Unit into Two Pieces
Allen Key
x4
2
x4
M5x12mm
M4x30mm
x4
M5x30mm
x4
M6x35mm
x4
M6x17mm 2.5mm
x8
x4
Spacers
Wall Plate Unit
x1
x1
TV Plate
x4
M6x8mm
Wall Plate
M8x25mm
x4
x4
10mm
1-2 Choose Configuration
50mmx50mm
75mmx75mm
100mmx100mm
150mmX150mm
200mmX200mm
①①
① ①
②
③
②
③
②
③
②
③
4
5 5
4
5
44
5
3
7
6 6
6 6
7 7
7
100mmX200mm 200mmX100mm
M6
M5
M4
1-3 Select TV Screws
TV back
Bracket Washer
Bracket
Long Screw
Spacer
No, go to PAGE 10 for detailed combination.
Yes, go to PAGE 10 for detailed combination.
TV back
1-4 Need Spacer?
Short Screw
Washer
M8
1-4 Attach TV Plate to TV Back
Screw and washer
Spacer(s), screw and washer
NOTE: Choose proper washer or spacer that
fits your particular TV mounting holes.
No!
TV
4
1/8"
(3mm)
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.
UP!
Level
Parts and Hardware
Min. 0.5"(12.7mm)
The TV plate is off center about 0.89"/22.5mm
to the wall plate. Please consider this point,
when positioning your TV on the wall.
Wooden Board
Wall Plate
UP!
5
x8
Lag Bolt M6x25mm
TV plate center
0.89"(22.5mm)
Wall plate center
x2
Level
6
22 LBS (10 kg)
Before hanging TV, please conduct "wall plate installation integrity test" first.
Hang the RV mount onto the wall plate and tighten the screw.
TV
1 2
Open the support arm, two people lift and hang up the TV, lock the screws.
4-2 TV leveling adjustment (±3°):
Loosen 2 leveling bolts on the rear of TV plate by maximum 1
turns, adjust to level, and retighten to secure.
7
4-1 Tilting angle adjustment (+5°/-15°)：
Pull TV to your desired angle then fasten 2 tilting bolts with
Allen key .
Loosen
Tighten
Loosen
Tighten
-15°
+5°
Tilting bolts
Tilting bolts
8
Pull out
Pull and hold
the strap
Important ! Make sure to stow the TV and fully lock the mount in place
before your RV moves.
Push your TV to the wall. Pull down the strap and lock the TV plate to
the wall plate.
Pull down
the straps
Stow
Allen key storage: For easy adjustment, you might put the Allen key on
the wall plate as illustration.
9
When you need move your TV to another room, please take off the RV
mount from the wall plate 1 , then hang it onto the other wall plate
2 .
Wall Plate 2
Wall Plate 1 Wall Plate 2
Wall Plate 1
Indice
Lingue:
Altri manuali Mounting Dream Supporto TV
Mounting Dream
Mounting Dream MD2210 Manuale utente
Mounting Dream
Mounting Dream HM2268-MK Manuale utente
Mounting Dream
Mounting Dream MD2380-03 Manuale utente
Mounting Dream
Mounting Dream MD2295 Manuale utente
Mounting Dream
Mounting Dream MD2731 Manuale utente
Mounting Dream
Mounting Dream MD2431-MX-03 Manuale utente
Mounting Dream
Mounting Dream MD2381 Manuale utente
Mounting Dream
Mounting Dream MD2413-S Manuale utente
Mounting Dream
Mounting Dream MD2617-24K Manuale utente
Mounting Dream
Mounting Dream MD2104-XL Manuale utente
Mounting Dream
Mounting Dream MD2210 Manuale utente
Mounting Dream
Mounting Dream HM2463-L Manuale utente
Mounting Dream
Mounting Dream MD2296-24K Manuale utente
Mounting Dream
Mounting Dream MD2380-24K Manuale utente
Mounting Dream
Mounting Dream MD2378 Manuale utente
Mounting Dream
Mounting Dream MD2163-K Manuale utente
Mounting Dream
Mounting Dream MD5428 Manuale utente
Mounting Dream
Mounting Dream MD2463-02 Manuale utente
Mounting Dream
Mounting Dream HM2296-1 Manuale utente
Mounting Dream
Mounting Dream MD2413-MX Manuale utente
