Moxa Technologies AirWorks AWK-3191 Manuale utente

P/N: 1802031910011

*1802031910011*

AWK-3191

Quick Installation Guide

Moxa Airworks

Edition 2.0, June 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The AWK-3191 900 MHz radio is Moxa’s answer to the need for long

distance wireless communication for industrial applications. By combining

the characteristics of the 33-centimeter band, and the proven 802.11

standard, Moxa is able to provide a reliable long distance wireless solution.

Unlike traditional point-to-point 900 MHz radios, the AWK-3191 also

provides reliable point-to-multi-point communication for higher flexibility

and lower total cost of ownership. Furthermore, the AWK-3191 is

designed for simple deployment, but in case of external interference,

engineers can adjust their 900 MHz central frequency and bandwidth

(5/10 MHz and 20 MHz) to optimize their wireless communication. With

industrial grade standards and wide-temperature models, the AWK-3191

is the most reliable solution for industrial long distance communication.

Package Checklist

Moxa’s AWK-3191 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

•AWK-3191

•Cable holder with one screw

•2 protective caps

•Quick installation guide (printed)

•Warranty card

Installation and Configuration

Before installing the AWK-3191, make sure that all items in the package

checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK-3191 has a

default IP address that you must use when connecting to the device for

the first time.

Step 1: Select the power source

The AWK-3191 can be powered by a DC power input or PoE (discontinued

starting with HW Rev 2.0.0). The AWK-3191 will use whichever power

source you choose.

Step 2: Connect the AWK-3191 to a notebook or PC

Since the AWK-3191 supports MDI/MDI-X auto-sensing, you can use

either a straight-through cable or crossover cable to connect the

AWK-3191 to a computer. If the LED indicator on the AWK-3191’s LAN

port lights up, it means a connection has been established.

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK-3191. Since the

AWK-3191’s default IP address is 192.168.127.253, and the subnet mask

is 255.255.255.0, you should set the IP address of the computer to

192.168.127.xxx and subnet mask to 255.255.255.0.

- 3 -

Step 4: Use the web-based manager to configure the AWK-3191

Open your computer’s web browser and type http://192.168.127.253

in the address field to access the homepage of the web-based

management system. Before the homepage opens, you will need to enter

the user name and password. For first-time configuration, enter the

default user name and password and then click on the Login button:

User name: admin

Password: root

ATTENTION

For security reasons, we strongly recommend changing the

password. To do so, select

Maintenance



Username/Password

, and then follow the on-screen

instructions.

Step 5: Select the operation mode for the AWK-3191

By default, the AWK-3191’s operation mode is set to AP. You can change

the setting in Wireless Settings Basic Wireless Settings if you

would like to use Client mode.

NOTE

For the change to take effect, you must click Save Configuration

to save the change, or Restart (clicking the Save and Restart

buttons will save all changes).

- 4 -

Panel Layout of the AWK-3191

1. Grounding screw

Terminal block for PWR1, PWR2,

relay, DI1, and DI2

3. Reset button

4. PWR1, PWR2, PoE (

discontinued

starting with HW Rev 2.0.0),

FAULT, and STATE LEDs

5. LEDs for signal strength

6. WLAN LEDs: CLIENT, BRIDGE,

and WLAN LEDs

7. RS-232 console port

8. 10/100BaseT(X) RJ45 Port

9. 10M LED

10.

100M LED

11.

MAIN antenna port

12.

AUX antenna port

13.

Model name

14.

Screw hole for wall-

mounting kit

15.

DIN-rail mounting kit

- 5 -

Mounting Dimensions

DIN-Rail Mounting

DIN-Rail Kit Dimensions:

Unit = mm (inch)

The aluminum DIN-rail attachment plate should be fixed to the back panel

of the AWK-3191 when you take it out of the box. If you need to reattach

the DIN-rail attachment plate to the AWK-3191, make sure the stiff metal

spring is situated towards the top, as shown in the figures below:

STEP 1:

Insert the top of the DIN rail into

the

slot just below the stiff metal spring.

STEP 2:

The DIN

-rail attachment unit will

snap into place as shown below.

To remove the AWK-3191 from the DIN rail, simply reverse Steps 1 and 2.

- 6 -

Wall Mounting (optional)

Wall-Mount Kit Dimensions:

Unit = mm (inch)

For some applications, it may be more convenient to mount the

AWK-3191 to a wall, as illustrated below:

STEP 1:

Remove the aluminum

DIN

-rail attachment plate

from the AWK

-3191, and

then attach the wall

mount

plates with M3 screws, as

shown in the adjacent

diagram.

STEP 2:

Mounting the AWK

-3191 to a wall requires 4 screws.

Use the AWK

-3191 device, with wall mount plates

attached as a guide, to mark the correct locations of

the 4 screws. The heads of the screws should be less

than 6.0 mm in diameter, and t

shafts should be less

than 3.5 mm in diameter, as shown in the figure at the

right.

NOTE

Test the screw head and shank size by inserting the screws into

one of the keyhole shaped apertures of the

wall-mounting p

lates

before attaching the plate to the wall.

STEP 3:

Once the screws are fixed into the wall,

insert the four screw heads through

the large opening of the

keyhole

-shaped apertures of the

wall

-mounting plate, and then slide

the AWK

-3191 downwards, as

indicated in th

e accompanying

diagram. Tighten the four screws for

added stability.

- 7 -

WARNING

•

This equipment is intended to be used in a Restricted Access

Location, such as a dedicated computer room, where a

ccess

can only be gained by

SERVICE PERSONS or by USERS who

have been instructed about the fact that the metal chassis of

the equipment is extremely hot and may cause burns.

•

Service persons or users should pay special attention and

take special precautions before handling this equipment.

•

Only authorized, well-

trained professionals should be allowed

to access the restricted access location. Access should be

controlled by the authority responsible for the location with

lock and key or a security identity system.

•

External metal parts are hot!!

Pay special attention or use

special protection before handling this equipment.

Wiring Requirements

WARNING

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your M

oxa AWK-3191.

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowed for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also pay attention to the following items:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring with similar electrical characteristics can be bundled

together.

•Keep input wiring and output wiring separate.

•It is strongly advised that you label wiring to all devices in the system

when necessary.

ATTENTION

This product is intended to be supplied by a Listed Power Unit

marked “Class 2” or “LPS” and rated O/P: 5.76 W

- 8 -

ATTENTION

Make sure

the external power adapter (inc

ludes power cords and

plug assemblies) provided with the unit is certified and suitable

for use in your country.

Grounding the Moxa AWK-3191

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel.

There must be no

pote

ntial difference between two ground potentials; otherwise

there is a risk that the device could be destroyed.

Installations with Cable Extended Antennas for Outdoor

Applications

If the antenna or the AWK device is installed outdoors or in an open-air

setting, proper lightning protection is required to prevent direct lightning

strikes on the AWK device. In order to prevent coupling currents from

nearby lightning strikes, a lightning arrester should be installed as part of

your antenna system. Ground the device, antenna, as well as the arrester

properly to provide maximum outdoor protection for the device.

- 9 -

Arrester Accessories

•SA-NMNF-01: Surge arrester, N-type (male) to N-type (female)

•SA-NFNF-01: Surge arrester, N-type (female) to N-type (female)

Wiring the Redundant Power Inputs

The top two pairs of contacts of the 10-contact terminal block connector

on the AWK-3191’s top panel are used for the AWK-3191’s two DC inputs.

Top and front views of the terminal block connector are shown here.

STEP 1: Insert the negative/positive DC wires

into the

V-/V+ terminals.

STEP 2:

To keep the DC wires from pulling

loose,

use a small flat

blade screwdriver to tighten the

wire

-clamp screws on the front of the terminal

block connector.

STEP 3:

Insert the plastic terminal block

connector prongs into the terminal block

receptor, which is

located on the AWK-3191’s t

panel.

ATTENTION

Before connecting the

AWK-3191

to the DC power inputs, make

sure that the DC power source voltage is stable.

Wiring the Relay Contact

The AWK-3191 has one relay output, which consists of the two contacts of

the terminal block on the AWK-3191’s top panel. Refer to the previous

section for detailed instructions on how to connect the wires to the

terminal block connector, and how to attach the terminal block connector

to the terminal block receptor. These relay contacts are used to indicate

user-configured events. The two wires attached to the Relay contacts

form an open circuit when a user-configured event is triggered. If a

user-configured event does not occur, the Relay circuit will be closed.

Wiring the Digital Inputs

The AWK-3191 has two sets of digital inputs—DI1 and DI2. Each DI

comprises two contacts of the 10-pin terminal block connector on the

AWK-3191’s top panel. Refer to the “Wiring the Redundant Power Inputs”

section for detailed instructions on how to connect the wires to the

terminal block connector, and how to attach the terminal block connector

to the terminal block receptor.

- 10 -

Cable Holder Installation (Optional)

Attach the cable holder to the bottom of the AWK-3191 to help keep

cables neat and avoid accidents that result from untidy cables.

STEP 1: Screw the cable holder onto the

bottom of the AWK

-3191.

STEP 2: After mounting the AWK-3191 and plugging in the LAN cable,

tighten the cable along the device and wall.

Communication Connections

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on the AWK-3191’s front panel are

used to connect to Ethernet-enabled devices.

Below we show pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports.

MDI Port Pinouts

MDI-X Port Pinouts

8-pin RJ45

Signal

Tx+

Rx+

Tx-

Rx-

Rx+

Tx+

Rx-

Tx-

RS-232 Connection

The AWK-3191 has one RS-232 (8-pin RJ45) console port located on the

front panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable to connect

the Moxa AWK-3191’s console port to your PC’s COM port. You may then

use a console terminal program to access the AWK-3191 for console

configuration.

Altri manuali per AirWorks AWK-3191

Indice

Altri manuali Moxa Technologies Punto di accesso wireless

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-4131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies NPort NWH650 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131-RCC Series Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131A-RTG Series Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131A-M12-RTG-EU-T Manuale utente

Moxa Technologies

Moxa Technologies AWK-3121B Series Manuale utente

Moxa Technologies

Moxa Technologies AWK-4121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121-RTG Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1131A Manuale utente

Moxa Technologies

Moxa Technologies WAC-1001 Series Manuale utente

Moxa Technologies

Moxa Technologies AWK-4121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121-M12-RTG Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1151C Series Manuale utente

Moxa Technologies

Moxa Technologies AWK-6232 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3251A-M12-RCC Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1100 Manuale utente

Moxa Technologies

Moxa Technologies airworks awk-5232 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente