Moxa Technologies AirWorks AWK-6222 Manuale utente

P/N: 1802062220013

*1802062220013*

AWK-6222

Quick Installation Guide

Moxa AirWorks

Edition 4.0, October 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Notes for the Reader

WARNING

ndicates that death or personal injury may occur if proper

precautions are not taken.

ATTENTION

Indicates that possible damage to this product or your property

may result if proper precautions are not taken.

NOTE

Highlights important information related to this product.

Package Checklist

Moxa’s AWK-6222 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

•1 AWK-6222

•2 dual-band omni-directional antennas (5/2 dBi, N-type (male),

2.4/5 GHz)

•Wall-mounting kit (includes 2 supports)

•Field-installable power plug

•Field-installable RJ45 plug

•2 metal caps to cover RJ45 connectors

•Metal cap to cover M12-female DI/O connector

•2 metal caps to cover N-type connectors

•Transparent plastic sticks for field-installable plugs

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

NOTE

The items above come with the standard version AWK

6222 The

package contents may vary for customized versions.

Installation

Before installing the AWK-6222, make sure that all items in the package

checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK-6222 has a

default IP address, user name and password that you must use when

resetting or connecting to your AWK-6222 device.

Default IP address: 192.168.127.253

User name: admin

Password: root

Please read “Chapter 2: Getting Started” in the AWK-6222 User’s

Manual for more details about installation and configuration.

- 3 -

ATTENTION

For security reasons, we strongly recommend changing the

password. To do so,

go to Maintenance



Password

, and then

follow the on-screen instructions.

NOTE

To make the change effective, you must save the change and

then click

Restart



Save and Restart button to apply all

changes.

Panel Layout of the AWK-6222

1. MAIN 1 antenna port.

2. MAIN 2 antenna port.

3. AUX 1 antenna port.

4. AUX 2 antenna port.

5. LEDs for PWR, FAULT,

STATE, WLAN1, WLAN2,

LAN1, and LAN2.

6. M12 A-coding connector for

PWR1 and PWR2.

7. M12 8-pin connector for

DI/DO

8. 10/100BaseT(X) RJ45 Port：

LAN1 and LAN2

9. RS-232 console port.

10.

Reset button

11.

Screw holes for wall

mounting

12.

Waterproof vent

13.

Grounding screw

14.

Screw holes for DIN-rail

mounting

ATTENTION

Please DO NOT open or remove vent

. Removing the seal will

void the warranty.

All exposed connectors, including

1 - 4, 6 - 9

, should be tightly

covered by suitable caps when they are not in use.

- 4 -

Dimensions (unit = mm)

Wall Mounting

In most applications, wall mount provides an easier installation. You will

find it quite easy to mount AWK-6222 on the wall, as illustrated below.

STEP 1:

Attach the wall

-mounting kit

with

M4 screws, as shown in

the diagram below:

STEP 2:

Mounting the AWK

-6222 on the wall

requires 4 screws. Use the AWK

-6222

device, with wall

-mounting kit

attached, as a guide to mark the correct

locations of the 4 screws. The heads of

the screws should be between 5.5 mm

and

8.5 mm in diameter, and the

shafts should not be more than 5.0 mm

in diameter, as

shown in the figure.

Do not drive the screws in all the way into the wall—leave a space of about

2 mm to allow room to slide the wall-mounting kit between the wall and

the screws.

ATTENTION

est the screw head and shank size by inserting the screws

into

one of the keyhole shaped apertures of the w

all-

mounting plates

before attaching the plate to the wall.

STEP 3:

Once the screws are fixed into the wall, insert the four screw heads

through the large opening of the keyhole-shaped apertures, and then

slide the AWK-6222 downwards, as indicated to the right. Tighten the

four screws for added stability.

- 5 -

DIN-Rail Mounting (Optional)

The DK-DC50131

die-cast metal kit can

be bought separately, and enable easy and

robust installation for the AWK

-6222. A

pair of DK

-DC50131s is needed for

DIN

-rail mounting. To install the DIN-rail

mounting kits, tightly attach the two

DIN

-rail mounting kits on the rear pa

nel of

AWK

-6222 with 12 screws (6 screws for

each kit)

To Install

STEP 1:

Use the recessed button on

the spring

-loaded bracket to

lock it into position.

STEP 2:

Insert the top of the DIN rail into the slot

just below the upper hook of the DIN

rail

moun

ting kit. Push the AWK-

6222 toward

the DIN rail

until the DIN-

rail attachment

bracket snaps into place.

- 6 -

To Release

STEP 1:

Pull out the two spring

-loaded

brackets

from the bottom until

they are fixed in the “release”

position.

STEP 2:

Pull the

AWK-

6222 out and upward.

Wiring Requirements

WARNING

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa AWK

-6222.

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also pay attention to the following items:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE

Do not run signal or communications wiring and power wiring in

the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring with similar electrical characteristics can be bundled

together.

•Keep input wiring and output wiring separate.

•It is strongly advised that you label wiring to all devices in the system

for easy identification.

- 7 -

Grounding Moxa AWK-6222

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel. There must be no

electrical

potential difference between any two ground

ing points.

Otherwise, there is a risk that the device could be destroyed.

Installations with Unstable Power Inputs

There are cases where the device has to be wired to the same power

source as other equipment. In such cases if equipment such as motors

that are connected in the circuit draw a large amount of current during

operation, the transient voltage drop could potentially cause the AWK to

become unstable. Installing a DC/DC power isolator between the two

equipment is recommended to isolate the transient effect in and to ensure

a stable power input for the AWK.

Installations with Cable Extended Antennas for Outdoor

Applications

If the antenna or the AWK device is installed outdoors or in an open-air

setting, proper lightning protection is required to prevent direct lightning

strikes on the AWK device. In order to prevent coupling currents from

nearby lightning strikes, a lightning arrester should be installed as part of

your antenna system. Ground the device, antenna, as well as the arrester

properly to provide maximum outdoor protection for the device.

- 8 -

Arrester Accessories

•SA-NMNF-01: Surge arrester, N-type (male) to N-type (female)

•SA-NFNF-01: Surge arrester, N-type (female) to N-type (female)

Wiring the Redundant Power Inputs

The AWK-6222 must be connected to a power-over-Ethernet (PoE) IEEE

802.3af compliant power source or an IEC60950 compliant limited power

source. When AWK-6222 is powered via DC power, the M12 A-coding

connector on the bottom panel is used for the AWK-6222’s two redundant

inputs. The pin assignment is shown below:

Power Input

V1+

V2+

V1-

V2-

GND

ATTENTION

This product is intended to be supplied by a Listed Power Unit

marked “Class 2” or “LPS” and rated O/P: 12 to 48 VDC, 1.066 to

0.312 A

Make sure the

external power adapte

r (including power cords and

plug assemblies)

provided with the unit is certified and suitable

for use in your country.

Before connecting the AWK

-6222

to the DC power inputs, make

sure the DC power source voltage is stable.

- 9 -

Wiring the Digital Inputs and Relay Contact

(Digital Output)

The AWK-6222 has two sets of digital input—DI1 and DI2. Each DI

comprises two contacts of the 8-pin M12 connector on the AWK-6222’s

bottom panel. These two digital inputs can be connected to

digital-output-enabled sensors for on-site status monitoring.

The AWK-6222 also has one relay output, which consists of the two

contacts. These relay contacts are used to detect user-configured events.

The two wires attached to the relay contacts form an open circuit when a

user-configured event is triggered. If a user-configured event does not

occur, the relay circuit will be closed.

A field-installable plug, M12A-8PMM-IP68, is recommended for

connecting the AWK-6222’s DIs and relay.

Communication Connections

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on the AWK-6222’s bottom panel are

used to connect to Ethernet-enabled devices.

The pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type)

ports are shown below.

MDI Port Pinouts

MDI-X Port Pinouts

8-pin RJ45

Signal

Tx+

Tx-

Rx+

Rx-

Signal

Rx+

Rx-

Tx+

Tx-

Signal

Relay

DI1 I1

DI1 COM_1

DI2 I2

DI2 COM_2

Reserved

- 10 -

RS-232 Connection

The AWK-6222 has one RS-232 (8-pin RJ45) console port located on the

bottom panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable to

connect the Moxa AWK-6222’s console port to your PC’s COM port. You

may then use a console terminal program to access the AWK-6222 for

console configuration.

Console Pinouts for 10-pin or 8-pin RJ45

10-Pin

Description

8-Pin

–

DSR

RTS

GND

TxD

RxD

DCD

CTS

DTR

–

NOTE

1. The pin numbers for male DB9 and DB25 male connectors,

and hole numbers for DB9 and DB25 female

connectors, are

labeled on the connector strip. However, the numbers are

typically quite small, so you may need to use a magnifying

glass to see the numbers clearly.

2. The pin numbers for both 8-pin and 10-

pin RJ45 connectors

(and ports) are typically not labeled on the connectors

(or

ports). Refer to the pinout diagram above for details.

ATTENTION

To ensure the IP6

8-rated connectivity, you must use a

waterproof housing during any communication activities. An

IP6

8-rated field installable plug, which is attached in AWK-

6222’s

accessory pack, may be needed in this case. The installation

instructions are shown below:

Altri manuali per AirWorks AWK-6222

Indice

Altri manuali Moxa Technologies Punto di accesso wireless

Moxa Technologies

Moxa Technologies NPort NWH650 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies TAP-213 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3191 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A-M12-RCC-EU Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131-RCC Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-5232-M12-RCC Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131A-RTG Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1200-AC Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies TAP-6226 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-4131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1151C Series Manuale utente

Moxa Technologies

Moxa Technologies Airworks AWK-3131A-M12-RCC Manuale utente

Moxa Technologies

Moxa Technologies airworks awk-5232 Manuale utente

Moxa Technologies

Moxa Technologies AirWorksAWK-6232-M12 Manuale

Moxa Technologies

Moxa Technologies AirWorks AWK-1131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AWK-4131 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1100 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente