MPS MP2696A Guida di riferimento

Altri manuali MPS Scheda madre

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

EVKT-MP2696A Product Brief

MP2696A Evaluation Kit

I2C-Controlled, Single-Cell Switching Charger

With Power Path Management and 3A Boost Output

MP2696A Evaluation Kit Product Brief Rev. 1.0 MonolithicPower.com 1

9/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2019 MPS. All Rights Reserved.

The MP2696A is a highly integrated, flexible,

switch-mode battery charge management and

system power path management device. It is

designed for a single-cell Li-ion and Li-Polymer

battery, and is ideal for a wide range of portable

applications.

The device integrates a full-featured, battery

charging profile with three phases: pre-charge,

constant current, and constant voltage charge. It

also manages theinput power source using input

current limit regulation and minimum input

voltage regulation.

The MP2696A can switch to boost mode to

generate the system power output from the

battery. It has an integrated, IN-to-SYS pass-

through path to pass the input voltage to system.

With the I2C interface, the host can program the

charge and boost parameters and read the

device’s operating status in the registers.

Safety features include: SYS short circuit

protection, input over-voltage protection, battery

under-voltage protection, thermal shutdown, and

JEITA battery temperature monitoring.

Kit Contents

EV2696A evaluation board

EV2696A-Q-00B

Communication interface with accessories

(EVKT-USBI2C-02)

oUSB to I2C communication interface

oRibbon cable

Online resources include: datasheet, user

guide, product brief, and GUI

Note: The GUI installation file and supplemental

documents can be downloaded from the MPS website.

*Laptop not included

Feature

Specification

Supply for Board

4.5V to 6.0V

Operating Input Voltage

4.5V to 6.0V

Battery Regulation Voltage

3.60V to 4.45V

Charge Current

500mA to 3600mA

Input Voltage Regulation

4.45V to 4.8V

Input Current Limit

100mA to 3000mA

Boost Output Voltage

5.05V to 5.225V

Discharge Peak Current

5.0A to 6.5A

Operating Systems

Supported

Windows XP, 7, and later

System Requirements

Minimum 22.2MB free

GUI Software

MP2696A V1.0

EVB Size (LxW)

6.35cmx6.35cm

USER GUIDE –MP2696A EVALUATION KIT (EVKT-MP2696A)

MP2696A Evaluation Kit Product Brief Rev. 1.0 MonolithicPower.com 2

9/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2019 MPS. All Rights Reserved.

Quick Start (Refer to user guide for more details.)

1. Install the GUI software.

2. Use the provided ribbon cable to connect the EVB and the USB to the I2C communication interface.

3. Preset the power supply output to between 4.5V and 6.0V, then connect the EVB.

4. Connect the communication interface to the PC, and turn the power supply on.

5. Open the GUI software and program as needed.

*Kit offers rapid application assessment, and requires minimal external components.

USB to I2C

Communication

Interface

USB Cable Ribbon Cable

Input Power

Supply

EV2696A-Q-

00B

GUI Battery

Load