
solo / duet Customer Assembly & Maintenance Procedure
HeRO solo /duet Customer Assembly & Maintenance Procedure
1. Purpose
1.1. Un-packing and assembly instructions for HeRO duet/solo at distributor / customer
sites.
1.2. Instructions for maintenance of HeRO duet/solo equipment.
2. Scope
2.1. HeRO solo /duet on GCX pole or desk top mounts.
3. Materials
3.1. For assembly, the following items will be needed:
a. Phillips screwdriver
b. 3/16” Hex wrench (included)
c. ½” socket wrench (included)
d. Ruler (30 mm length minimimum)
3.2. For maintenance, the following items will be needed:
a. USB Keyboard
b. USB Mouse
HeRO solo / duet should be located in a position that allows access to
the electrical mains connection and does not block the mains disconnect device,
if present.
4. Assembly Procedure –Desktop Mount
4.1. Two 18-8 SS Metric Pan Head Phil Machine Screw M4 Size, 8mm Length are used for
the top holes, two black screws that come with the Advantech are used for the middle
holes, and two Metric 18-8 SS Truss Head Phil Machine Screw M4 Size, 6mm Length are
used for the bottom holes. Mount the AD2 using 4 L-brackets. See Figures 1 and 2.