MR MControl 7 Manuale utente
Touch Panel
MControl 7"/10"
Operating Instructions
5809776/02 EN
© All rights reserved by Maschinenfabrik Reinhausen
Dissemination and reproduction of this document and use and disclosure of its
content are strictly prohibited unless expressly permitted.
Infringements will result in liability for compensation. All rights reserved in the event
of the granting of patents, utility models or designs.
The product may have been altered since this document was published.
We reserve the right to change the technical data, design and scope of supply.
Generally the information provided and agreements made when processing the
individual quotations and orders are binding.
The original operating instructions were written in German.
Table of contents
35809776/02 EN
1 Introduction...........................................................................6
1.1 Manufacturer.................................................................................... 6
1.2 Safekeeping..................................................................................... 6
1.3 Notation conventions ....................................................................... 6
1.3.1 Hazard communication system .................................................................... 6
1.3.2 Information system....................................................................................... 8
1.3.3 Instruction system ........................................................................................ 8
1.3.4 Typographic conventions ............................................................................. 9
2 Safety...................................................................................10
2.1 Appropriate use ............................................................................. 10
2.2 Inappropriate use........................................................................... 11
2.3 Fundamental Safety Instructions ................................................... 11
2.4 Personnel qualification................................................................... 12
2.5 Personal protective equipment ...................................................... 13
3 IT security............................................................................15
4 Product description............................................................16
4.1 Scope of delivery ........................................................................... 16
4.2 Function description....................................................................... 17
4.3 Design............................................................................................ 18
4.4 Configuration examples ................................................................. 19
5 Packaging, transport and storage ....................................24
5.1 Packaging, transport and storage.................................................. 24
5.1.1 Suitability, structure and production .......................................................... 24
5.1.2 Markings..................................................................................................... 24
5.2 Transportation, receipt and handling of shipments........................ 24
5.3 Storage of shipments..................................................................... 26
Table of contents
4 5809776/02 EN
6 Mounting .............................................................................27
6.1 Preparation .................................................................................... 27
6.1.1 Required tools ............................................................................................ 27
6.1.2 Electromagnetic compatibility..................................................................... 28
6.1.3 Cable recommendation .............................................................................. 29
6.1.4 Requirements on the power supply............................................................ 29
6.2 Mounting the device....................................................................... 30
6.3 Connecting the device ................................................................... 35
7 Commissioning...................................................................38
8 Operation.............................................................................39
8.1 Operation ....................................................................................... 39
8.2 Configuring the touch panel........................................................... 42
8.2.1 Server......................................................................................................... 42
8.2.2 Network ...................................................................................................... 43
8.2.3 Display ....................................................................................................... 44
8.2.4 Time ........................................................................................................... 45
8.2.5 Security ...................................................................................................... 46
8.2.6 General ...................................................................................................... 47
8.2.7 Import & Export .......................................................................................... 47
8.2.8 Information ................................................................................................. 50
9 Maintenance and care ........................................................51
10 Fault elimination .................................................................52
10.1 General faults ................................................................................ 52
10.2 Other faults .................................................................................... 52
11 Removal...............................................................................53
12 Disposal...............................................................................54
Table of contents
55809776/02 EN
13 Technical data.....................................................................55
13.1 Display ........................................................................................... 55
13.2 Power supply ................................................................................. 55
13.3 System networking ........................................................................ 56
13.4 Ambient conditions ........................................................................ 57
13.5 Dimensions and weight.................................................................. 57
13.6 Standards and directives ............................................................... 58
1 Introduction
6 5809776/02 EN
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
It also includes safety instructions and general information about the prod-
uct.
This technical file is intended solely for specially trained and authorized per-
sonnel.
1.1 Manufacturer
The product is manufactured by:
Maschinenfabrik Reinhausen GmbH
Falkensteinstraße 8
93059 Regensburg, Germany
Tel.: (+49) 9 41/40 90-0
Fax: (+49) 9 41/40 90-7001
E-mail: [email protected]
Further information on the product and copies of this technical file are avail-
able from this address if required.
1.2 Safekeeping
Keep this technical file and all supporting documents ready at hand and ac-
cessible for future use at all times.
1.3 Notation conventions
This section contains an overview of the symbols and textual emphasis
used.
1.3.1 Hazard communication system
Warnings in this technical file are displayed as follows.
1.3.1.1 Warning relating to section
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
1 Introduction
75809776/02 EN
WARNING
Type of danger!
Source of the danger and outcome.
► Action
► Action
1.3.1.2 Embedded warning information
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
1.3.1.3 Signal words and pictograms
The following signal words are used:
Signal word Definition
DANGER Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE Indicates measures to be taken to prevent damage to property.
Table1: Signal words in warning notices
1 Introduction
8 5809776/02 EN
Pictograms warn of dangers:
Pictogram Definition
Warning of a danger point
Warning of dangerous electrical voltage
Warning of combustible substances
Warning of danger of tipping
Warning of danger of crushing
Table2: Pictograms used in warning notices
1.3.2 Information system
Information is designed to simplify and improve understanding of particular
procedures. In this technical file it is laid out as follows:
Important information.
1.3.3 Instruction system
This technical file contains single-step and multi-step instructions.
1 Introduction
95809776/02 EN
Single-step instructions
Instructions which consist of only a single process step are structured as fol-
lows:
Aim of action
üRequirements (optional).
► Step 1 of 1.
ðResult of step (optional).
ðResult of action (optional).
Multi-step instructions
Instructions which consist of several process steps are structured as follows:
Aim of action
üRequirements (optional).
1. Step 1.
ðResult of step (optional).
2. Step 2.
ðResult of step (optional).
ðResult of action (optional).
1.3.4 Typographic conventions
The following typographic conventions are used in this technical file:
Typographic convention Purpose Example
UPPERCASE Operating controls,
switches
ON/OFF
[Brackets] PC keyboard [Ctrl] + [Alt]
Bold Software operating con-
trols
Press Continue button
…>…>… Menu paths Parameter > Control pa-
rameter
Italics System messages, error
messages, signals
Function monitoring alarm
triggered
[► Number of pages]. Cross reference [► 41].
Table3: Typographic conventions
2 Safety
10 5809776/02 EN
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning, operation, and monitoring of the prod-
uct.
▪ Read this technical file through carefully to familiarize yourself with the
product.
▪ This technical file is part of the product.
▪ Read and observe the safety instructions provided in this chapter in partic-
ular.
▪ Observe the warnings in this technical file in order to avoid function-re-
lated dangers.
▪ The product is manufactured according to the state of the art. Risks to life
and limb of the user or impairment of the product and other material as-
sets may occur during use due to function-related dangers despite this.
2.1 Appropriate use
The product is a device for displaying and operating the web-based visual-
ization system of ISM® devices.
The product is designed solely for use in electrical energy systems and facili-
ties. It may be used in compliance with the requirements and conditions
listed in this technical file as well as the warnings in this technical file and the
warnings posted on the product. This applies across the entire service life of
the product, from delivery to installation and operation through to disassem-
bly and disposal.
The following is considered appropriate use:
▪ Operate the product in accordance with this technical file, the agreed-
upon delivery conditions and the technical data.
▪ Ensure that all necessary work is performed by qualified personnel only.
▪ Only use the equipment and special tools included in delivery for the in-
tended purpose and in accordance with the specifications of this technical
file.
▪ Only operate the product in industrial areas. Observe the notices in this
technical file regarding electromagnetic compatibility and the technical
data.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali MR Sistema di controllo
