MRC CLRM-200 Manuale utente

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 [email protected]

MRC.VER.01-10.13

M-

-2

High-Quality Portable Colorimeter

Operating Instruction of Universal Test Components

Application: used to test liquid reagent, paste (such as ketchup and coating), powder

(such as coffee), etc.

I. Component Structure

The structure of universal test components is shown in Figure 1.

①Base; ②Baffle; ③Square Integrator; (31) Measuring Port of the Square Integrator

④Cuvette; ⑤Cover Plate; ⑥Push Plate; ⑦Screw

Figure 1 The Structure of Universal Test Components

II. Usage

The usage of universal test components is shown in Figure 2.

i. Place &/50310 colorimeter according to Figure 2. The measuring port of &/50310 is

butted up against that of square integrator, as shown in Figure 3. Then, use ⑥push plate

to hold &/50310 colorimeter and tighten ⑦the screw. Check whether &/50310 colorimeter

is loose or not. If it is loose, please re-tighten the screw.

ii. Put the ④Cuvette into the ③Square Integrator. There are two matte surfaces in the

cuvette. Please only touch these two matte surfaces when hold the cuvette. In addition,

there are two transparent surfaces which engraved with “MAX”and “MIN”. Please put

one surface against the measuring port of the square integrator, as shown in Figure 3.

iii. Put ④the Cuvette into ③the Square Integrator. Cover the ⑤cover plate. There is

an arrow icon in the cover plate. Meanwhile, square integrator also has an arrow icon.

Please make sure the location of these two arrows is consistent.

After finishing the above steps, you can start the measurement.

Figure 2 The Matching Between &/50310 Colorimeter and Universal Test Components

Figure 3 The Local Matching Between &/50310 Colorimeter and Universal Test Components

III. Notes

i. Keep ③the square integrator clean. After finishing the measurement, please cover

the ⑤cover plate and keep the square integrator closed.

ii. Protect those two transparent surfaces of the cuvette from scratching and soiling.

iii. The amount of the object in cuvette must be between “MAX”and “MIN”.

Contents

Product Description ....................................................................................................................1

Cautions .........................................................................................................................................1

I. Button Description ...................................................................................................................2

II. Interface Description ..............................................................................................................3

III. Battery Description and Installation..................................................................................3

IV. 200 Colorimeter Operating Instruction .......................................................................6

（I）Turning Power On ................................................................................................6

1. Preparations Before Power On ............................................................................6

2. Turning Power On ..................................................................................................6

3. White Calibration and Black Calibration..............................................................6

（II）Measurement.........................................................................................................7

1. Locating and Measuring Method..........................................................................7

2. Standard Measurement.........................................................................................7

3．Sample Measurement .............................................................................................8

（III）Save Data................................................................................................................9

1. Auto Save................................................................................................................9

2．Manual Save...........................................................................................................10

（IV）Connect 200 Colorimeter to the PC.........................................................10

（Ⅴ）print............................................................................................................................11

V. System Function Description.............................................................................................12

1. Record and Standard Entering...........................................................................12

2. Calibration..............................................................................................................13

3. Tolerance Setting..................................................................................................14

4. USB Communication............................................................................................15

5. Delete Records.....................................................................................................16

6. Language Selection .............................................................................................17

7. Display Mode ........................................................................................................18

8. Average Measurement ........................................................................................18

9. Function Setting....................................................................................................19

Ⅵ. Product Parameters ............................................................................................................25

1. Product Features..................................................................................................25

2. Product Specifications.........................................................................................26

Appendix......................................................................................................................................27

1. The Color of Objects............................................................................................27

2. Human Eyes to Distinguish Colors....................................................................28

Product Description

200 colorimeter is researched and developed in accordance with CIE (International

Commission on Illumination) and CNS (China National Standards). 200

colorimeter is a high precise colorimeter with simple user interface and stable

performance. It can be powered by both Li-ion battery and external DC power

supply.

White and black calibration is not required for 200 colorimeter which greatly simplifies

the measuring steps.

200 colorimeter adopts illumination locating which brings out more precise and quicker

locating.

200 adopts complex advanced algorithms which make measurement performance

more stable, more accurate and more compatible.

Cautions

● This colorimeter is a precise measuring instrument. Please avoid dramatic changes of

external environment when measuring. These changes, including the flicker of

surrounding light, the rapid change of temperature, will affect the measuring accuracy.

● Keep the instrument balanceable; make sure the measuring aperture cling to the test

sample, and no shaking or shifting when measuring. Please prevent the colorimeter

from fierce collision or crash.

● This instrument is not waterproof. Do not use it in high humidity environment or in water.

● Keep the colorimeter clean. Avoid dust, powder or solid particles entering the measuring

aperture and the instrument.

● Replace the white calibration cover and put the colorimeter into instrument cabinet when

not in use.

● Please take out the battery to prevent the colorimeter from damage if you don’t use it for

a long time.

● Please keep the colorimeter in a cool dry place.

● Any unauthorized changes to the colorimeter are not permitted, or it will affect the

measuring accuracy, even cause irreversible damage.

I. Button Description

The following is a brief introduction of the buttons. We will give more detailed information

about its function separately in next chapters.

Figure 1 Button Function

Button Function Introduction

1. Testing

2. Menu

3. Up/Print

4. Down/Save

5. Enter

6. Back

II. Interface Description

Figure 2 Interface Description

Interface Description

1. Power Switch: Press the button to turn on the colorimeter. Press the button

again. The button will pop up. Then the colorimeter is turned off.

2. DC Interface: Connect with AC adapter. It is used to connect to external power

source. The specification of external power source is 5V=2A.

3. USB Interface / RS-232 Interface: This interface is a common interface. The

instrument automatically judges the connection status. USB interface is used to

transfer data to PC. Its baud rate is 115200bps. RS-232 interface is used to

connect to the printer; its baud rate is 19200bps.

Note: When connecting to external power source, please press the power

switch to start the instrument.

III. Battery Description and Installation

Please use original Li-ion battery. Do not use other batteries, or it will cause irreversible

damage.

Please take out the battery to prevent the colorimeter from the damage of battery leakage

if you don’t use it for a long time.

When using external power source or connecting USB interface to PC, if you press the

power switch, it will charge the Li-ion battery. If you don’t want to charge the battery,

please take out the battery.

When charging the battery, dynamic battery icon will display on the top right corner of

“Standard Measurement” and “Sample Measurement” interfaces. In figure 3, the charging

icon displays in “Standard Measurement” interface; if no charging, the dynamic icon will

not appear.

Figure 3 Charging Icon

Figure 4 Battery Installation

Installing Battery

When installing battery, be sure the power switch is popped out (The power source of

colorimeter is cut off). Then remove the battery cover.

Insert the Li-ion battery into battery compartment and push it gently in right direction.

Put the battery cover on Li-ion battery, and then push it up.

Battery Specification: Li-ion 3.7V==0.5A.

Indice

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente