Naish Torque 2 + i3 55 Manuale utente

USER MANUAL

ISO 21853:2020

Certied

TORQUE 2

+i3 QUICK RELEASE

CONTROL SYSTEM

TABLE OF CONTENTS

RELEASES & AGREEMENTS.......................................................................................3

WARNING & SAFETY PRECAUTIONS.................................................................4-5

CONTROL SYSTEM OVERVIEW

Torque 2 + i3 55 & Torque 2 + i3 50 Control System......................................................6

LINE CONNECTIONS

Attaching Flying Lines to a 4-line Kite............................................................................7

Attaching Fool Proof Connectors ...................................................................................8

Changing from 24 m to 22 m.............................................................................................8

Changing from 22 m to 24 m.............................................................................................8

TORQUE 2 + i3 CONTROL SYSTEM

Adjusting Torque 2 Steering (Rear) Flying Lines .....................................................9-10

Operating the Chicken Finger........................................................................................11

Operating the i3 Quick Release.....................................................................................12

Operating the Torque 2 Trim Cleat ................................................................................13

KITE LEASH

Attaching the Kite Leash................................................................................................14

Operating the Kite Leash Quick Release.....................................................................15

MAINTENANCE...............................................................................................................16

WARRANTY POLICY......................................................................................................17

TABLE OF CONTENTS

RELEASES & AGREEMENTS

RELEASE AND WAIVER OF CLAIMS AGREEMENT

In consideration of your use of this product, you hereby agree to the following, to the fullest extent

permitted by law:

To waive any and all claims that you have or may have in the future against Naish International, a

division of Nalu Kai Incorporated, or any of its agents, resulting from use of this product and any of its

components.

To release Naish International, a division of Nalu Kai Incorporated, or any of its agents from any and

all liability for any loss, damage, injury or expense that you or any users of this product may suffer, or

that your next of kin may suffer, as a result of the use of this product, due to any cause whatsoever,

including negligence or breach of contract on the part of Naish International, a division of Nalu Kai

Incorporated, or any of its agents, in the design or manufacture of this product.

ARBITRATION

In further consideration of the sale to you of this product and any of its components, you hereby agree

to submit to binding arbitration any and all claims, which you believe you may have against Naish

International, a division of Nalu Kai Incorporated, or any of its agents, arising from the use of any of

the Naish International/Nalu Kai Incorporated equipment. The arbitration shall be pursuant to the

rules of the American Arbitration Association.

Arbitration shall be commenced within one (1) year from the date on which any alleged claim rst

arose. Further, the arbitration shall be held in Maui, Hawaii unless otherwise mutually agreed to by all

parties. The submission to the American Arbitration Association shall be limited and the arbitration

award may be enforced by any court of competent jurisdiction.

BINDING EFFECT OF AGREEMENT

In the event of your death or incapacity, this Agreement shall be effective and binding upon your heirs,

next of kin, executors, administrators, assigns and representatives.

ENTIRE AGREEMENT

In entering into this Agreement, you are not relying upon any oral or written representations other

than what is set forth in this agreement and User’s Guide.

BY INFLATING THE LEADING EDGE AND ASSEMBLING THIS

PRODUCT,YOU ARE AGREEING TO:

1) be bound to the terms set forth below and 2) require anyone using this product to be bound by such

terms. If you are unwilling to be bound by these terms, return this product (before use) for a full refund.

ASSUMPTION OF RISK

Use of this product and any of its components involves certain inherent risks, dangers and hazards,

which can result in serious personal injury and death. In using this product you freely agree to assume

and accept any and all known and unknown risks of injury while using this equipment. The risks

inherent in the sport can be greatly reduced by abiding by the Warnings and Guidelines listed in this

User’s Guide and by using common sense. and accept any and all known and unknown risks of injury

while using this equipment. The risks inherent in the sport can be greatly reduced by abiding by the

Warnings and Guidelines listed in this User’s Guide and by using common sense.

Use: Kitesurf, Landkite

Recommended Rider Weight: 30 kg-120 kg

Comparable Kites: Inatable 4-line

Function of Release: Grab the red release slide and push the slide away from your body. The chicken

loop will release from one side of the quick release.

Function of Release System: Main release & disconnecting release

RELEASE OF LIABILITY, CLAIM WAIVER AND ASSUMPTION OF RISK AGREEMENT

RELEASES & AGREEMENTS

This product is certied with ISO 21853:2020

WARNING & SAFETY PRECAUTIONS

•Kiteboarding is a dangerous sport. Always use extreme caution when using this product.

•Misuse of this product can cause serious injury or death.

•Never use this product unless you are in good physical health and you are an experienced swimmer.

•Never act in a careless manner when using this product; never attempt to y your kite over other

people, pets or any other obstructions.

•You are responsible for your own safety and the safety of others around you when using this product.

•Your safety and the safety of others is not solely based on the use of a control system. Other

factors, including knowledge of the sport and your equipment, proper assessment of the conditions,

awareness of your own physical limitations and personal understanding of the surrounding

environment are just a few factors that affect safety.

•Do not wait until an emergency situation to learn how to use the safety features of your control

system. Learn about safety and emergency response during instruction and do everything possible

to mitigate or eliminate risky situations that would require the use of safety systems.

•Your safety systems must be maintained and regularly checked.

•Verify your leash will not get stuck when the safety is pulled before going out on the water.

•If you are under the age of 18, you must have your parents or legal guardian read these warnings

and instructions. You must not use this product without proper guidance and supervision by your

parents or legal guardian.

•Use of this product exposes the user to unexpected and unavoidable risks, dangers and hazards.

•Do not use this product if you are under the inuence of alcohol, drugs or medications.

•Never use this product during a thunderstorm, lightning, in offshore wind conditions or wind

conditions that are above your ability level.

•Make sure you take lessons from a certied kiteboarding school before using this product on the water.

•Be sure you have been trained by a certied kiteboarding school to launch and land your kite before

using this product.

•Always have an experienced kiteboarder assist you with launching and landing your kite on land.

•Make sure you know on-the-water self-rescue techniques before using this product.

•Our Quick Release Systems are developed and designed to be used by riders up to 100 kg (220 lbs).

•Always wear a harness designed for kiteboarding. Always wear a helmet, gloves, shoes, protective

eyewear when using this product.

•Always wear a Coast Guard approved personal otation device when using this product in the water.

•Always observe local rules and regulations when using this product.

•Make sure to always have a 100 m semi-circle area downwind and on both sides of your ying

position that is clear of people, animals, and other obstructions.

•The release system is not designed for cold condition and will be impaired when used in icy

conditions, e.g. for snow kiting.

WARNING & SAFETY PRECAUTIONS

FLYING LINES

•Never touch the ying lines when this product is in use. Flying lines are extremely dangerous while

under tension and can cause serious injury or death.

•Never allow yourself or anyone else to go between the control system and the kite when the kite is

unsecured on the ground or in the launching position. The kite can launch unexpectedly at anytime

and can cause serious injury or death to anyone near by.

•Always check your ying lines for knots before each use. Knots greatly reduce the strength of the

ying lines and can break under tension, which can cause serious injury or death.

•Always check your ying lines for wear before each use. Worn ying lines can break under tension,

which can cause serious injury or death.

i3 QUICK RELEASE SYSTEM

•The expected lifespan of the i3 Quick Release System uctuates depending on a variety

of factors including use, conditions, proper care and maintenance. With normal use, the expected

lifespan is at least two years, not including ying lines and trim lines. It is recommended you

monitor the product closely for wear and tear and clear all components of sand and debris

between sessions for optimal functioning.

•Familiarize yourself with the way the i3 Quick Release System operates and test it on land in

a non emergency situation.

•Always inspect your i3 Quick Release System prior to launching your kite and after each use

to make sure it is connected properly and in working order.

•If you see any sign of wear on these components, you must replace them prior to use.

Failure to do so, can result in serious injury or death.

•Remove any debris that may be inside the i3 Quick Release System prior to use.

•Rinse your i3 Quick Release System with fresh water after every use.

KITE LEASH

•The expected lifespan of the kite leash uctuates depending on a variety of factors including use,

conditions, proper care and maintenance. With normal use, the expected lifespan is two years.

After that time it is recommended you monitor the product closely for wear and tear.

•Never use this product without a kite leash. A loose kite is extremely dangerous to everyone

downwind of you.

•The kite leash system is not a permanent attachment to this product. Never permanently attach

yourself to this product.

•Familiarize yourself with your leash’s quick release operation and test it on land in a non-

emergency situation.

•Always inspect your leash’s quick release prior to launching your kite to make sure it is

connected properly and in working order.

•Remove any debris that may be inside the quick release prior to use.

•The components in your leash’s quick release have a limited lifespan and must be changed often.

If you see any sign of wear on the leash’s quick release components, you must replace them prior

to use. Failure to do so, can result in serious injury or death.

•Rinse your leash’s quick release with fresh water after every use.

WARNING & SAFETY PRECAUTIONS

CONTROL SYSTEM OVERVIEW

TORQUE 2 + i3 55 & TORQUE 2 + i3 50 CONTROL SYSTEM

CONTROL SYSTEM OVERVIEW

A) Control System Bar

B) Floaters

C) Bar Ends

D) Leader Lines (Red/Blue)

E) Flying Line Adjuster

F) Kite Leash

G) Kite Leash Attachment Ring

H) Trim Line

I) Trim Line Handle

J) Flagging Line

K) Front Flying Lines (White)

L) Steering (Rear) Flying Lines

(Red = Left) (Blue = Right)

M) Line Organizer

N) Trim Cleat

O) PU Tube

P) Micro Stopper Ball

C C

B B

E E

L L

LINE CONNECTIONS

ATTACHING FLYING LINES TO A 4-LINE KITE

All Naish Control Systems are delivered

assembled and ready to use.

1) Begin with the ying lines from the 4-line

control system laid out directly upwind of

the kite.

WARNING: Make sure all ying lines are

straight, completely free of tangles and properly

positioned for correct line connection before

attaching them to the kite.

2) Place the front and rear line connection points

outside of the leading edge and make sure

they are free of tangles and knots.

3) Attach both front ying lines to the front line

connection points.

4) Attach the left steering (rear) ying line to the

left steering (rear) line connection point.

5) Attach the right steering (rear) ying line to the

right steering (rear) line connection point.

WARNING: Naish ying lines and bridles feature

foolproof connectors to reduce the risk of

incorrect connection between front and steering

(rear) line connection points. Be sure to always

use authentic Naish ying lines and bridles when

using Naish kites and control systems.

Steering

(Rear)

Steering

(Rear)

Front Front

LINE CONNECTIONS

ATTACHING FOOLPROOF CONNECTORS

To create a lark's head loop, fold the loop

over and pull the line through the loop as

shown.

Insert the knotted end of the other line

through the lark's head loop as shown.

Pull the lines tight to secure the

connection as shown.

1 2

CHANGING FROM 24 MTO 22 M

CHANGING FROM 22 MTO 24 M

LINE CONNECTIONS

Loosen the lines at the 22+2 m connection

Slide the 2 m extention over the 22 m lines

and feed the knotted end through the loop.

Center lines have a tab instead of a knot.

Pull the 2 m length through the loop and

remove the 2 m extension from the lines.

Pull the 2 m line fully through the loops

until it is tight.

LINE CONNECTIONS

TORQUE 2 + i3 CONTROL SYSYEM

TORQUE 2 + i3 CONTROL SYSTEM

ADJUSTINGTORQUE 2 STEERING (REAR) FLYING LINES

1- Locking Cavity

2- Locking Recess

3- Adjusting Cavity

Repositioning the knots found inside the

bar/line adjuster changes the length of the

steering (rear) ying lines.

Knot A: Decreases the length of the

steering (rear) ying lines.

Knot B: Naish control systems are

delivered in the Knot B position.

Knot C: Increases the length of the

steering (rear) ying lines.

Knot D: Securing knot for the

Knot C position.

WARNING: Do not use Knot D position in

the locking cavity.

C D

Pull the bar/line adjuster out from the bar end. Pull the end of leader line out from the Adjusting

Cavity (3).

Pull the knot out of the Locking Recess (2). Pull the leader line out through the bottom of the

Adjusting Cavity (3).

ADJUSTINGTORQUE 2 STEERING (REAR) FLYING LINES (CONTINUED)

Pull the knot out of the Locking Cavity (1). Adjust the leader line to the desired knot using the

Adjusting Cavity (3).

Lock the desired knot securely in position using the

Locking Cavity (1).

Feed the end of the leader line back through the

Adjusting Cavity (3).

Lock the following knot securely in position using the

Locking Recess (2) and insert excess line into the

Adjusting Cavity (3).

IMPORTANT: Repeat this procedure on the

opposite bar end so the leader line length adjustment is

done exactly the same on both sides.

Reinstall bar/line adjuster by pushing it back into the

bar end, while pulling leader line above the oater to

remove any slack as shown.

TORQUE 2 + i3 CONTROL SYSTEM

TORQUE 2 + i3 CONTROL SYSYEM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Naish Sistema di controllo

Naish

Naish Fusion ATB Control System 2016 Manuale utente

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente