Environmental and Regulatory
Specifications
Environmental
Operating
Temperature 32°F to 122°F (0°C to 50°C )
Relative Hu-
midity 5% to 90%, Non-condensing
Storage Tempera-
ture -4°F to 140°F (-20°C to 60°C)
Shock and
Vibration
Random 2 g, 5 Hz - 500 Hz (class 2), 1
m drop
Safety
CAN/CSA-C22.2 No. 61010-1-1-12, UL
Std. No. 61010-1 (3rd Edition), IEC
61010-1:2010, Pollution degree 2s
Operating
Altitude 13,123 (4,000 m)
Storage Altitude 39,370 (12,000 m)
EMC EN 61326-1:2006
General
Dimensions 4.36 in x 1.6 in x 1.28 in
(11.07 cm x 4.06 cm x 3.25 cm)
Weight 0.25 lb (0.116 kg)
Battery 2 AA Alkaline
Resetting to
Factory Defaults
CAUTION: Resetting a Test Accessory to factory
defaults erases all performance and conguration
data and unclaims it from Link-Live.
1) Ensure the unit is powered off, meaning all
LEDs are off.
2) Hold down the power button for
approximately 30 seconds.
As the unit resets, it begins with all ve status lights
illuminating solid YELLOW for about 15 seconds.
Then, the LEDs ash GREEN sequentially upward to
the cloud light for another 15 seconds, and nally all
LEDs ash GREEN simultaneously.
3) Release the power button as soon as the lights
flash GREEN simultaneously, and BEFORE they
flash RED.
If you do not release the power button before the
LEDs ash RED, the LEDs turn YELLOW to indicate a
failed reset attempt, and you will have to start the
reset procedure over.
If the reset is successful, the Test Accessory will shut
down and power o.
Web Server Interface
Open a web browser, and input the IP address of your Test Accessory. You can acquire the IP address from
Link-Live or by discovering the Test Accessory from your main handheld tester.
iPerf Port
This eld lets you enter a
Port Number other than
the default 5201.
NOTE: The iPerf Port
Number set here on the iPerf server must match the
Port set on the iPerf3 client.
WWW Test
This eld displays the destination URL for the WWW
Ping Test performed by the Test Accessory and
allows you to set a new address for the test. The
default destination is www.google.com.
Proxy Configuration
This section lets you congure settings for a proxy
server. If you chose Automatic or Manual proxy,
enter the Proxy Address, Port, Username, and
Password as required.
Status
The Status screen displays
the latest connection results
from the Test Accessory.
Settings
The Settings screen allows
custom conguration of the
IP address, Port, and Proxy
for testing.
Select Apply Changes to save
new settings.
IP Configuration
These settings allow you to
chose and congure a static
IP address.
Powering O the Unit
To turn o the unit, hold the power button for two
seconds until the LEDs begin ashing sequentially
downward, and then release the button.
Aer the LEDs stop ashing, the Power/PoE symbol
remains on for about 15 seconds until shutdown
completes.
PN 770-000050 07/2019
© 2019 NetAlly
*770-000050*
Software Update LED
Sequence
NOTE: Do not turn o or try to
claim your Test Accessory to Link-
Live during the update process or
the update may fail.
1) First, all five lights flash
YELLOW.
2) Next, starting with the PoE
lightning bolt at the bottom
of the unit, each status light
begins to flash YELLOW in
sequential order up to the
Cloud status light, until all
five are flashing YELLOW
again for several seconds.
3) Then, the unit reboots;
starting with the Cloud status
light, each light flashes
GREEN sequentially down to
the PoE status light.
4) Finally, the Test Accessory
reconnects, beginning with
the PoE status light. Each
light blinks GREEN while
connecting.
Restarting
Connecting
Updating
Starting Update
Debug Information
This section contains troubleshooting information
for use by technical support.
Log Files
Click the button to Download Log Files.
Log Level
This setting lets you change the threshold at which
events are logged in the Log Files.
Select the drop-down menu, and select a new
setting to adjust the log level.
Click the Default Log Level button to reset to WARN,
the default setting.
Nearest Switch Test
Click the Nearest Switch Test button to cause the
Test Accessory to identify the closest switch and
display its characteristics.
Language
Select this menu item to chose a dierent language
from the drop-down list.
Connection
Test Results
The Status screen displays by
default. You can access Settings
and Debug Information from the
Top Menu.
Open-Source Soware Acknowledgment: This product
may incorporate open-source components that are
governed by the GNU General Public License (“GPL”)
or licenses that are compatible with the GPL license
(“GPL Compatible License”).
NetAlly reserves the right, at its sole discretion, to
make changes at any time in its technical information,
specications, service, and support programs.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
