NETGEAR PL1010 Manuale utente

Quick Start

PowerLINE WiFi 1000

Essentials Edition

Models PL1010 and PLW1010

Package Contents

In some regions, a resource CD is included with your product.

Get Started

PowerLINE adapters give you an alternative way to extend your network

using your existing electrical wiring. Plug two or more PowerLINE adapters

into electrical outlets to create a wired network connection. Use a

PowerLINE WiFi access point to add a WiFi access point to your wired

network.

You can add up to eight Homeplug AV-certiﬁed and AV2-certiﬁed adapters

to extend your network. For a complete list of Homeplug AV-certiﬁed

devices, visit http://www.homeplug.org/certiﬁed_products.

Meet Your Adapters

Before you install your adapters, familiarize yourself with their LEDs,

buttons, and ports.

1. Power LED 4. Ethernet port 7. WiFi LED

2. Ethernet LED 5. Factory Reset button 8. On/O switch

3. Pick A Plug LED 6. Security button 9. WPS button

4 5 6

Power LED Solid green. The electrical power is on.

Solid amber. The adapter is in power saving mode (PL1000

only).

Blinking green. The adapter is in the process of setting up

security.

O. The adapter is not receiving electrical power.

Ethernet LED Solid. The Ethernet port is linked.

O. No Ethernet connection is detected.

Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet

with the strongest link performance, indicated by the color

displayed by the LED:

Red. Link rate < 50 Mbps (good).

Amber. Link rate > 50 and < 80 Mbps (better).

Green. Link rate > 80 Mbps (best).

O. The adapter did not ﬁnd any other compatible

PowerLINE devices using the same encryption key.

WiFi LED

Solid blue. The WiFi radio is on.

O. The WiFi radio is o.

Factory Reset

button

Press the Factory Reset button for one second, and then

release it to return the PowerLINE adapter to its factory

default settings.

Ethernet port Connect your wired devices, including computers, WiFi

routers and game consoles, to your PowerLINE network.

Security button Use the Security button to create a secure PowerLINE

network.

On/O switch Use the On/O switch to turn the device on and o.

WPS button Use the WPS button to automatically connect your computer

or other WiFi devices that support WPS to your PowerLINE

network.

Install Your Adapters

Note: Do not plug your PowerLINE adapters into extension cords, power

strips, or surge protectors.

Room 1 Room 2

¾To install your adapters:

1. Plug in your new adapters.

2. Wait until the Pick A Plug LEDs are lit.

3. Use your computer, tablet, or smartphone to connect to your new

PowerLINE WiFi network. The network name is printed on the product

label and is similar to Netgear##_EXT or Netgear##-5G_EXT.

Congratulations. You installed your adapters and set up your network.

You can customize the network and security settings later.

Do More

Aer your PowerLINE network is installed and running, you can use WPS to

connect your access point, expand your network, customize the network

settings, and customize security.

Use WPS to Connect to Your Network

¾To automatically connect to the PowerLINE access point

using a WPS button:

1. Press and hold the WPS button on the PowerLINE access point for

two seconds and release it.

The WiFi LED starts to blink.

2. Press the WPS button on your WiFi device for two seconds and

release it.

When the WiFi LED stops blinking, your WiFi device is automatically

connected to the PowerLINE access point and you can surf the web.

Add Adapters

To add adapters before you conﬁgure the security feature, just plug them

in and connect the adapters to your equipment.

¾To add an adapter to a PowerLINE network with security

set:

1. Plug the adapter into a wall outlet where you want to add Internet

access.

2. If you used a private encryption key, press the Security button on

one of the adapters that is already a part of the network for two

seconds, and then press the Security button on the new adapter for

two seconds.

Both buttons must be pressed within two minutes.

Note: The Security button does not work in power saving mode.

Do not press the Security button on the PowerLINE adapter until

installation is complete and the adapters are communicating with each

other (indicated by the blinking Power LED). Pressing this button too soon

can temporarily disable PowerLINE communication. If this occurs, use the

Factory Reset button to return the PowerLINE adapter to its factory

default settings.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NETGEAR Scheda di rete

NETGEAR

NETGEAR PA301 Manuale utente

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuale utente

NETGEAR

NETGEAR MA 301 Manuale utente

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuale utente

NETGEAR

NETGEAR FA312 Manuale utente

NETGEAR

NETGEAR Orbi RBS40 Manuale utente

NETGEAR

NETGEAR WNCE4004 Manuale utente

NETGEAR

NETGEAR GA621 Manuale utente

NETGEAR

NETGEAR WNCE4004 Manuale utente

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuale utente

NETGEAR

NETGEAR XAV1201/XAVB1201 Manuale utente

NETGEAR

NETGEAR PLW1000 Manuale utente

NETGEAR

NETGEAR powerline 500 XAVB5622 Manuale utente

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuale utente

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuale utente

NETGEAR

NETGEAR WPN111 - RangeMax Wireless USB 2.0 Adapter Manuale utente

NETGEAR

NETGEAR EA201 Manuale utente

NETGEAR

NETGEAR FA510 - 32-Bit 10 And 100 Mpbs PCMCIA Network... Manuale utente

NETGEAR

NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Manuale utente

NETGEAR

NETGEAR XAVB6504 Manuale utente

NETGEAR

NETGEAR FA310TX - 10/100Mbps Fast Ethernet PCI Card Manuale utente

NETGEAR

NETGEAR GA622T - Copper Gigabit Ethernet Card Manuale utente

NETGEAR

NETGEAR GA621 Manuale utente

NETGEAR

NETGEAR RangeMax WN511T Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente