2
PowerDIN 4PZ –Quick Installation Guide (QIG)
Thank you for purchasing a product of NETIO products a.s. Before using your
product for the first time, please read this short guide to avoid problems with
incorrect installation or use. For more information, please see the User's Manual
available at http://netio-products.com.
Please carefully read the following notice.
The NETIO PowerDIN 4PZ is an electrical device. Mishandling may damage the
device, void your warranty, or result in injury or death.
Safety Notices
NETIO PowerDIN connects directly to a 230VAC supply; therefore, it should be
installed by qualified personnel only!
1) Never remove the device cover if the relay terminals are connected to the power
grid!
2) The local electrical system must include a power switch or a circuit breaker and
overcurrent protection.
3) The manufacturer is not liable for any damage caused by incorrect use of the
device or by operating it in an unsuitable environment.
4) The device is not rated for outdoor use.
5) Do not expose the device to strong vibrations.
6) Unauthorized modifications may damage the device or cause a fire.
7) Protect the device from liquids and excessive temperatures.
8) Make sure the device does not fall.
9) Only electrical appliances approved for use with the electrical network may be
connected to the device.
10) Do not connect multiple devices in series.
11) The cable plug must be easily accessible.
12) The device is completely switched off only when unplugged.
13) If the device malfunctions, disconnect it from the electrical outlet and contact
your vendor.
14) Do not cover the device.
15) Do not use the device if it appears to be mechanically damaged.
16) Make sure that the input and output cables are rated for the respective current.
