Netvox R716S Manuale utente

R716S

Portable LoRa Field Signal Meter

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained

in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Portable LoRa Field Signal Meter

R716S


 
Table of Contents
 
Introduction..................................................................................................................................... 2 
Appearance...................................................................................................................................... 3 
Features ........................................................................................................................................... 3 
Set up Instruction............................................................................................................................. 4 
1. Power On................................................................................................................................. 4 
2. Manual Activation.................................................................................................................... 5 
3. Function Key............................................................................................................................ 5 
4. LCD Interface.......................................................................................................................... 5 
5. Sleep Mode.............................................................................................................................. 6 
6. Command................................................................................................................................. 6 
7. Low Voltage Warning............................................................................................................... 6 
Applications..................................................................................................................................... 6 
Important Maintenance Instruction.................................................................................................. 7

1. Introduction

R716S is developed based on LoRa technology to detect the network signal of the LoRa network. R716S can detect the LoRa

signal strength of the scanned area and display the detected data through LCD.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with

other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication

distance. Widely used in long-distance, low-data wireless communications. For example, automatic meter reading,

building automation equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices

and gateways from different manufacturers.

2. Appearance

3. Features

⚫SX1276 wireless communication module

⚫2 x AA batteries (1.5V / section)

⚫Detect wireless signal strength

⚫LCD screen

⚫Compatible with LoRaWANTM Class A

⚫Frequency hopping spread spectrum technology

⚫Low power consumption and long battery life

Note: (1) Actual range may vary depending on environment.

(2) Battery life is determined by sensor reporting frequency and other variables.

Please visit http://www.netvox.com.tw/electric/electric_calc.html for detailed information of battery lifespan calculation.

Level Key

Signal Key

LCD

4. Set up Instruction

4.1. Power On

R716S uses 2 AA batteries to power on.

Step 1. After powering on, the R716S will light up and display .

Step 2. Search the network automatically.

Failed to join the network: display “noNE”

Successfully join the network: displayed and updated the signal value

Step 3. Sleep mode: when the R716S is not in use within 40 seconds

Front view

Installation completed

Push up the

battery cover

After inserting

the battery

Insert the battery

Pull back the

battery cover

4.2. Manual Activation

1. Press the “signal key” or “level key” once to activate the device.

2. After activating the device, the screen lights up and displays the last displayed result.

3. After the device is activated, if there is no operation within 40 seconds, the screen will turn off and enter sleep mode.

4. If it is activated again within 40s after the previous activation, the device starts to update the signal value in real time.

Note: (1) R716S could show “noNe”due to the poor connection of network, interruption of signal, or long-distance

communication. It would start detection only when the network connection is stable. Pressing the signal key or the

level key would not activate the device.

(2) R716S would refresh the data every 5 seconds during the first 30 seconds. For the last 10 seconds, the final detection

result would be shown on the LCD screen.

4.3. Function Key

1. Detect Signal Strength:

Press the signal key, the LCD will display the current detected signal strength and update the signal value in real time.

2. Display Signal Level:

Press the level key, the LCD will display the current signal level based on the packet loss.

4.4. LCD Interface

R716S display four digits.

1. Press the signal key, and it will display the signal strength in four digits.

2. Press the level key, and it will display the signal level in the fourth digit.

The Range of Signal Strength Level:

Packet Loss (%)

90–100

80–90

70–80

60–70

50–60

40–50

30–40

20–30

10–20

0–10

Signal Level

Note: To get an accurate result, user should wait until the final detection result to show on the LCD.

4.5. Sleep Mode

1. After the device is powered on, if there is no operation within 40 seconds, it will enter sleep mode.

2. After the device wakes up, the last value will be displayed. If there is no operation within 40s, it will enter sleep mode.

4.6. Command

1. After the device is powered on and automatically detects the signal value, the device will send a command every 5 seconds.

2. After the signal is detected, each sent command corresponds to a replied command.

If the device is in the detection state, the command will be sent.

If the device is activated or in the sleep mode, the command will not be sent.

4.7. Low Voltage Warning

When the voltage is lower than or equal to 2.4V, “!” will be displayed at the top of the screen.

5. Applications

This device is mainly suitable for detecting the signal strength of gateway coverage. If multiple networks are in the same

range, false data could be shown.

6. Important Maintenance Instruction

Kindly pay attention to the following in order to achieve the best maintenance of the product:

• Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device

gets wet, please dry it completely.

• Do not use or store the device in dusty or dirty environment. It might damage its detachable parts and electronic

components.

• Do not store the device under excessively hot condition. High temperature can shorten the life of electronic devices,

destroy batteries, and deform or melt some plastic parts.

• Do not store the device in places that are too cold. Otherwise, when the temperature rises to normal temperature, moisture

will form inside, which will destroy the board.

• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit boards and delicate

structures.

• Do not clean the device with strong chemicals, detergents or strong detergents.

• Do not apply the device with paint. Smudges might block in the device and affect the operation.

• Do not throw the battery into the fire, or the battery will explode. Damaged batteries may also explode.

All of the above applies to your device, battery and accessories. If any device is not working properly, please take it to the

nearest authorized service facility for repair.

Indice

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente

netvox R716S Manuale utente

Manuali Strumento di misura popolari di altre marche