Newtons4th PPA45 Series Guida utente

PPA45xx series

START UP GUIDE

Firmware v2_169

06th November 2017

PPA45xx Quick User Guide

Page 1

CONTENTS

Contents

......................................................................

Page.1

Getting Started................................................

Page.2

1.1

Unpacking and Contents....................................

Page.3

1.2

Handle Fitment.................................................

Pages.4-5

Safety.............................................................

Page.6

2.1

Safety Instructions...........................................

Page.6

2.2

Cautions.........................................................

Page.7

2.3

Warranty.........................................................

Page.8

Front Panel Layout Diagram...............................

Page.9

3.1

Front Panel Display Key Functions......................

Pages.10-28

Rear Panel Layout Diagram................................

Page.29

Basic Key Operation..........................................

Page.30

5.1

Set up to start.................................................

Page.30

5.2

Setting the Time..............................................

Page.30

5.3

Setting the Date..............................................

Page.31

5.4

Adjusting the Screen Brightness........................

Page.31

5.5

Adjusting Keyboard Beep..................................

Page.31

5.6

Setting User Data............................................

Page.32

Quick User Guide.............................................

Page.33

6.1

Wiring............................................................

Pages.33-36

6.2

Start Up.........................................................

Page.37

6.3

6.3.1

6.4

6.4.1

Zoom Functions...............................................

Analogue Output..............................................

Speed & Smoothing..........................................

Efficiency........................................................

Pages.38-39

Page.40-43

Pages.44-46

Page.47

6.5

Application Modes............................................

Page.48

6.5.1

PWM Motor Drive Mode.....................................

Pages.49-55

6.5.2

6.5.3

6.5.4

6.5.5

6.5.6

6.5.7

6.5.8

6.5.9

Lighting Ballast Mode........................................

Inrush Current Mode........................................

Transformer Mode............................................

Standby Power Mode........................................

Calibration Mode..............................................

Oscilloscope Mode............................................

Interharmonic Sweeps......................................

HF Current Shunts / Rogowski Coil.....................

Page.56

Pages.57-63

Pages.64-69

Pages.70-72

Page.73

Pages.74-77

Pages.78-83

Pages.84-89

PPA45xx Quick User Guide

Page 2

7.1

7.1.1

7.2

Remote Settings..............................................

Transferring Internal Datalogs to USB Memory Stick

Data Logging to USB Memory Stick....................

Program Store / Recall / Delete.........................

Pages.90-92

Pages.93-94

Pages.95-96

Pages.97-100

8.1

10.

Repair / Recalibration.......................................

Basic Functionality Check..................................

Specifications..................................................

PPA Comparison Table......................................

Page.101

Page.102-118

Page.119-122

Page.123

PPA45xx Quick User Guide

Page 3

1 Getting Started

1.1 Unpacking

When you receive your product, check that the following items are included for

the appropriate PPA. Refer to the contents list below for each model. If any item

is missing or damaged during transportation, immediately contact your local

sales distributor or N4L office

CONTENTS

MODEL

Mains

Lead

4mm

Yellow

Lead

4mm

Black

Lead

4mm

Red

Lead

Yellow

Croc

Clip

Black

Croc

Clip

Red

Croc

Clip

N4L

2GB

Memory

Stick

Start

Guide

Manual

Comms

Manual

PPA4510

PPA4520

PPA4530

Communication Cables

USB

Filtered USB 2.0 A male to B male 2m lead

RS232

9 pin to 9 pin null modem cable

PPA45xx Quick User Guide

Page 4

1.2 Fitment of the PPA series Carry/Tilt handle

PPA5/15/45/55 series power analyzers are supplied with a Carry/Tilt Handle that

is located within the accessory pack..............................................................

The handle allows a user to position the instrument upwards at one of two angles

for easier viewing when the instrument is positioned below the line of sight. The

design also allows storage under the unit without obstruction of the rubber feet

so that instruments can be stacked and is easily removed to allow the connection

of rack mounting brackets without the need to remove instrument covers.

Correct installation of the handle is important to ensure the correct operation

and long life the handle.

The following pictures illustrate correct and incorrect handle fitment:

Correct 1/2 –Correct fitting is from the top of the unit as shown here

Correct 1 Correct 2

A coloured dot for identification and alignment purposes can be found on the

handle and mounting bush on the instrument

PPA45xx Quick User Guide

Page 5

Correct 3 Correct 4

A correctly fitted handle will have the ‘N4L Newtons4th’ wording in the correct

reading plane when the handle is to the front of the instrument (Pic. 3)

Also, a correctly fitted handle will allow storage under the unit (Pic. 4)

Using the coloured dots for alignment will ensure a correctly fitting handle

Incorrect 1 Incorrect 2

Fitting the handle from the bottom of the unit as shown here is wrong...

(Incorrect 1)

Incorrect fitting can be seen because the handle does not fit correctly under the

unit and handle sides do not fit flush with the registration washer (Incorrect 2)

PPA45xx Quick User Guide

Page 6

2 Safety

2.1 IMPORTANT SAFETY INSTRUCTIONS

This equipment is designed to comply with BSEN 61010-1 (2001) (Safety

requirements for electrical equipment for measurement, control, and laboratory

use) –observe the following precautions:

Ensure that the supply voltage agrees with the rating of the instrument

printed on the back panel before connecting the mains cord to the supply

This appliance must be earthed. Ensure that the instrument is powered from

a properly grounded supply

The inputs are rated at 1kV rms or dc cat II; 600V rms or dc cat III. Do not

exceed the rated input

Keep the ventilation holes on the underneath and rear free from obstruction

There are no user serviceable parts inside the instrument –do not attempt to

open the instrument, refer service to the manufacturer or his appointed agent

Note: Newtons4th Ltd shall not be liable for any consequential damages,

losses, costs or expenses arising from the use or misuse of this product

however caused

PPA45xx Quick User Guide

Page 7

2.2 CAUTIONS

Do not use a damaged power cord or cables

Doing so may cause an electric shock or a fire

Do not place any object on this instrument

Do not use this instrument if faulty

If you suspect the instrument to be faulty, contact your local N4L office or

representative for repair (see section 8)

PPA45xx Quick User Guide

Page 8

2.3 Warranty

This product is guaranteed to be free from defects in materials and workmanship

for a period of 36 months from the date of purchase

In the unlikely event of a problem within this guarantee period, first contact

Newtons4th Ltd or your local representative to give a description of the problem.

Please have as much relative information to hand as possible –particularly the

serial number and release number these can be found by pressing the SYSTEM

button then the “Left Arrow”

If the problem cannot be resolved directly then you will be given an RMA number

and asked to return the unit. The instrument will be repaired or replaced at the

sole discretion of Newtons4th Ltd

This guarantee is limited to the cost of the PPA45xx itself and does not extend to

any consequential damage or losses whatsoever including, but not limited to,

any loss of earnings arising from a failure of the product or software

In the event of any problem with the instrument outside of the guarantee period,

Newtons4th Ltd offers a full repair and re-calibration service. Contact your local

representative. It is recommended that the PPA45xx be re-calibrated annually

PPA45xx Quick User Guide

Page 9

3 Front Panel Layout

1. Display Screen

2. Screen Display Function Buttons

3. Power Analyzer Mode Buttons

4. Handle

5. Measurement Control Function Keys

6. Rubber Feet

7. Menu Selection and Cursor Controls

8. Measurement Settings Buttons

9. Front USB Port

10. Power On / Off Button

1 2 3

10 9 8 7 6

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Newtons4th Strumento di misura

Newtons4th

Newtons4th SLM3505 Manuale per l'uso e la cura

Newtons4th

Newtons4th PPA55 Series Guida utente

Newtons4th

Newtons4th PPA 5500 KinetiQ Manuale utente

Newtons4th

Newtons4th N4L PPA500/1500 Manuale utente

Newtons4th

Newtons4th PPA4500 Guida utente

Newtons4th

Newtons4th PSM3750 NumetriQ Manuale utente

Newtons4th

Newtons4th PSM1700 Manuale utente

Newtons4th

Newtons4th PPA2500 Manuale per l'uso e la cura

Newtons4th

Newtons4th SFRA45 Manuale dell'operatore

Newtons4th

Newtons4th PPA55 Series Guida utente

Newtons4th

Newtons4th PPA500 Manuale per l'uso e la cura

Newtons4th

Newtons4th PPA 5500 KinetiQ Manuale per l'uso e la cura

Newtons4th

Newtons4th PSM3750 NumetriQ Manuale per l'uso e la cura

Newtons4th

Newtons4th PSM1700 Manuale per l'uso e la cura

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente