Nexleaf Analytics COLDTRACE 5 Manuale di istruzioni
Set Up and Operations Guide
3
Get to Know Your CT5 ..... 6
Setting Up Your CT5 ..... 9
Turning on the CT5 ..... 15
Understanding Each Button ..... 17
Resetting ..... 22
Booting Up the CT5 ..... 25
Installation and Troubleshooting ..... 30
TABLE OF CONTENTS
4
ColdTrace has 3 core components:
1. ColdTrace 5 (CT5) device which sends temperature and power
data to a dashboard via GPRS and alerts via SMS and email when
fridge temperatures get too hot or too cold.
2. A secure web-based dashboard that allows remote access to
real-time temperature and provides customizable analytics and
report-generating tools to track fridge performance.
3. Standard Operating Procedures (SOPs) and training guides
for nurses, maintenance technicians, regional supervisors, and
Ministries of Health.
HELLO, COLDTRACE 5
CONTACT YOUR RTM DEPLOYMENT ADVISOR
OR NEXLEAF AT: INFO@NEXLEAF.ORG
5
PRE-INSTALLATION CHECKLIST
GENERAL CHECKLIST
• Check the power situation of the health facility and if they have
a solar panel, nd out if that can be used for CT5. For health
facilities that need solar power (with batteries or direct), a
DC-to-DC converter is needed if there is no power inverter to
support the standard CT5 wall power plug.
• Opt for the right mobile service provider and procure SIM card
with M2M plan & post-pay option (preferred). Avoid the pre-pay
option if possible as topping up the SIM for CT5 every month
may prove to be dicult.
• CT5 needs less than 2 MB/ 150 SMS monthly may be needed to
perform. NOTE: If more than 2 people subscribe to receive SMS
alerts from the device, then more than 150 SMS are needed.
• Work with Nexleaf to identify the best SMS Gateway solution.
• Purchase surge-protected extension cords.
Clinic power set up determined
SIM card plan with 2 MB/150 SMS monthly (for 1 person
receiving alerts) purchased
Preferably a M2M and post paid SIM card
SIM card size: Micro SIM (3FF)
SMS Gateway solution congured
Surge-protected extension cords purchased
6
GET TO KNOW YOUR CT5
7
GET TO KNOW YOUR CT5
KNOW YOUR CT5
Main Components
1. Antenna
2. Front display
3. Alarm buzzer
4. Stop Alarm button
5. Cycle Display button
6. Function button
7. Sensor ports - up to 5 sensors
8. Power port
9. Back panel
10. Installation hook
STOP
ALARM
CYCLE
DISPLAY FUNCTION
A B C D E
Accessories
Mounting Accessories
1
2
34 5 6
7
9
10
x3 x3
x8
8
8
GET TO KNOW YOUR CT5
KNOW YOUR CT5
Accessories
1. Sensor connection cable
2. Power adapter
3. Screws and wall anchors
4. Clips
STOP
ALARM
CYCLE
DISPLAY FUNCTION
A B C D E
Accessories
Mounting Accessories
x3 x3
x8
2
1
3
4
9
SETTING UP YOUR CT5
SETTING UP YOUR CT5
10
IDEAL LOCATION FOR CT5
Before installation, it is important to determine the location of the
remote temperature monitoring device on the wall.
• Close to the fridge and to the power source.
• Where the device can safely sit on the wall without being hit by
the fridge door/ window
• Where the network connectivity is strong enough to ensure data
upload. NOTE: Turn device on to identify location where signal
strength is strongest.
• Easily accessible by a person to cycle through the temperatures
to get readings for each sensor
STOP
ALARM
CYCLE
DISPLAY FUNCTION
Questo manuale è adatto per i seguenti modelli
1
Indice
