NGS roller flash Manuale utente
roller flash
USER’S MANUAL
www.ngs.eu
English iFrançais iEspañol i Deutsch iItaliano i Português iPolski i
ΕΛΛΗΝΙΚΑ
roller flash
bluetooth stereo speaker
with led lights
ENGLISH
3
OVERVIEW
1 Mode/lights button
2 Volume – / REW
3 Volume + / FWD
4 Button
5 LED lights
6 Micro SD card slot
7 USB port
8 On/Off
9 Connection point for
charging via micro USB
1
5 6 7 8 9
32 4
USER’S MANUAL
4
BLUETOOTH SPEAKER PAIRING
RECONNECTING
1. Turn on the power, a message sound; “beep” will
announce from speaker and the mode LED will blinking
in blue; the device is turned ON and goes into searching /
paring / reconnect mode for pair.
2. Now, turn ON the Bluetooth function on your mobile
phone.
3. Search for “NGS ROLLER FLASH” and select it to pair
(for first time pairing or pairing a new mobile device).
4. The Bluetooth speaker will be reconnecting
automatically if your mobile phone has been
paired (Depend on the of mobile phone’s type and
configuration, manual reconnection may require on
some devices).
5. If pairing is successful, a message sound; “beep” will
announce from speaker and the mode LED light will
keep turn on.
CHARGING THE BLUETOOTH
SPEAKER
1. Connect the Bluetooth speaker’s micro USB socket with
the computer’s USB port through USB cable.
2. The charging LED will turn ON in red light; the
rechargeable battery is in charging.
3. The charging LED red light will turn OFF when the
rechargeable battery is fully charged.
4. Disconnect the USB cable, and close the rubber seal
cover when it is done.
ENGLISH
5
HAND FREE FUNCTION
BLUETOOTH MODE ONLY
When there is an incoming call;
1. The ringing sound will up and the playing music will
pause automatically.
2. Press button to pick up the call if you want.
3. Now you have hand free function with the Bluetooth
speaker.
4. Hold down the button for 2 seconds to hand up the
call when finished. And,
5. The paused music will start to play automatically.
BLUETOOTH SPEAKER CONTROL
FUNCTION
1. In playing music, press button to pause music, press
it once again to play.
2. Press and hold the button to increases the volume
level.
3. Press and hold the button to decreases the volume
level.
4. Press the button to play next music file.
5. Press the button to play previous music file.
MODES
BLUETOOTH / USB / FM RADIO / MICRO SD CARD
To switch between modes, press the “M” key. If the device
is not connected to a micro SD card or USB memory, it will
skip these modes when the “M” key is pressed.
USER’S MANUAL
6
MICRO SD CARD MODE
USB MODE
FM MODE
1. Insert the micro SD card into the slot.
1. Insert a USB flash drive into the slot.
2. The device will automatically play any music in MP3
format on the flash drive.
1. Hold down the “M” button until you hear “Radio mode”.
2. Press the button to start an automatic channel
search. Channels are remembered automatically.
3. To skip between channels, simply press the and
buttons.
Note: For better radio reception, connect the charging
cable (which also acts as an antenna) into the micro USB
slot.
2. The device will automatically play any music in MP3
format on the card.
ENGLISH
7
If at any time in the future you should need
to dispose of this product please note that:
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice.
(Waste Electrical and Electronic Equipment
Directive)
HEREBY, LURBE GRUP S.A, DECLARES
THAT THIS SPEAKER IS IN COMPLIANCE
WITH THE ESSENTIAL REQUIREMENTS
AND OTHER RELEVANT PROVISIONS OF
DIRECTIVE 1999/5/EC.
LIGHTS
The LED lights have 3 settings.
1. Change in time with the bass of the song playing.
2. Fixed light. Always follow the same pattern.
3. Off. No light.
To move between these modes, simply hold down the
button for 3 seconds.
Battery warranty: The battery is a consumer product, and
as such it is under warranty for 12 months.
roller flash
Haut-parleur bluetooth stéréo
avec éclairage LED
FRANÇAIS
9
APERÇU GENERAL
1 Bouton mode/voyants
2 Volume – / REW
3 Volume + / FWD
4 Bouton
5 Voyants LED
6 Entrée carte micro SD
7 Port USB
8 Allumé/éteint
9 Connexion charge micro
USB
1
5 6 7 8 9
32 4
MANUEL DE L’UTILISATEUR
10
COUPLAGE RECONNEXION DU
HAUTPARLEUR BLUETOOTH
1. Allumez l’alimentation, un message est diffusé par le
haut-parleur et le voyant LED bleu du mode clignote ;
le dispositif s’allume et passe au mode de recherche /
couplage / reconnexion pour réaliser le couplage.
2. Activer maintenant la fonction Bluetooth sur votre
téléphone mobile.
3. Rechercher le “NGS ROLLER FLASH” et le sélectionner
pour effectuer le couplage (pour le premier couplage ou
pour le couplage d’un nouveau dispositif mobile).
4. Le haut-parleur Bluetooth rétablira automatiquement
la connexion à votre téléphone mobile si celui-ci a été
couplé précédemment (cela dépend du type et de la
configuration du téléphone mobile, certains dispositifs
peuvent requérir la reconnexion manuelle).
5. Si le couplage se réalise correctement, un message
retentit sur le haut-parleur et la LED s’allume de manière
fixe.
CHARGEMENT DU HAUT
PARLEUR BLUETOOTH
1. Raccorder la prise micro USB du haut-parleur Bluetooth
au port USB à l’aide du câble USB.
2. Le voyant LED rouge de charge s’allume; la batterie
rechargeable est en cours de chargement.
3. Le voyant LED rouge de charge s’éteint; la batterie
rechargeable est complètement chargée.
4. Débrancher le câble USB, et fermer le couvercle avec le
joint étanche (10) quand c’est terminé.
Indice
Lingue:
Altri manuali NGS Altoparlanti
NGS
NGS Roller Tumbler Manuale utente
NGS
NGS ROLLER PINEAPPLE Manuale utente
NGS
NGS Roller Disco Manuale utente
NGS
NGS ROLLER SLANG Manuale utente
NGS
NGS ROLLER NITRO 2 Manuale utente
NGS
NGS Roller Flow Mini Manuale utente
NGS
NGS SKY CHARM Manuale utente
NGS
NGS WILDDANCE Manuale utente
NGS
NGS WILD DUB 2 Manuale utente
NGS
NGS WILDSKA1 Manuale utente
NGS
NGS WILDDISCO Manuale utente
NGS
NGS Roller Cube Manuale utente
NGS
NGS SKYLINE Manuale utente
NGS
NGS roller Trick Manuale utente
NGS
NGS SKYDUSk Manuale utente
NGS
NGS NITRO 1 Manuale utente
NGS
NGS ROLLER JOY Manuale utente
NGS
NGS ROLLER BYRON 360 Manuale utente
NGS
NGS WILDTRAP 3 Manuale utente
NGS
NGS COSMOS Manuale utente
