Nibe SAM 40 Manuale utente
User manual
LEK
NIBE SAM 40
Supply air module
UHB EN 1809-1
531372
LEK
LEK
Table of Contents
41 Important information
4Installation data
5Safety information
6Serial number
7SAM 40 - An excellent choice
82 The heating installation – the heart of the house
9Supply air module function
10Maintenance of SAM 40
133 Disturbances in comfort
13Info-menu
15Troubleshooting
164 Technical data
175 Glossary
18Item register
19Contact information
3NIBE SAM 40Table of Contents |
1 Important information
Installation data
SAM 40Product
Serial number
Installation date
Installer
SetFact. sett.NameNo.
fan sp. supply air5.1.6
60%normal
ext sup air md5.3.9
-15°C
18°C
outdoor temp. T1
supply air temp. at T1
outdoor temp. T2
supply air temp. at T2
outdoor temp. T3
supply air temp. at T3
0°C
18°C
15°C
18°C
Serial number must always be given
Certification that the installation is carried out according to instructions
in the accompanying installer manual and applicable regulations.
_________________________Signed__________________Date
NIBE SAM 40Chapter 1 | Important information4
Safety information
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Rights to make any design or technical modifications
are reserved.
©NIBE 2018.
If the supply cable is damaged, only NIBE, its service
representative or similar authorised person may replace
it to prevent any danger and damage.
5NIBE SAM 40Chapter 1 | Important information
Symbols
NOTE
This symbol indicates danger to person or machine .
Caution
This symbol indicates important information about what you should
observe when maintaining your installation.
TIP
This symbol indicates tips on how to facilitate using the product.
Serial number
The serial number can be found at the bottom left inside the front cover.
LEK
Serial number
LEK
Caution
You need the product's 14 digit serial number for servicing and support.
NIBE SAM 40Chapter 1 | Important information6
SAM 40 - An excellent choice
SAM 40 is a supply air module that, together with an exhaust air heat
pump from NIBE, gives you a complete solution for mechanical exhaust
air and pre-heated supply air.
Excellent properties for SAM 40:
■Low noise level
The supply air module has a low noise level.
■Easy to install
The supply air module is easy to install together with a compatible heat
pump from NIBE. The supply air module is connected to the heat pump,
which allows you to read off the supply air module’s values from the
heat pump’s display.
Compatible NIBE heat pumps
■F370
■F750
7NIBE SAM 40Chapter 1 | Important information
2 The heating installation – the
heart of the house
A
C
B
20 °C 55 °C
0 °C
45 °C
Heating medium
Outdoor air
Refrigerant
Room air
The temperatures are only examples and may vary between different installations and
time of year.
NIBE SAM 40Chapter 2 | The heating installation – the heart of the
house
8
Supply air module function
A supply air module utilises, via the heat pump, the heat in the building’s
ventilation air to heat up the incoming outdoor air.
Outdoor air
The outdoor air is transferred to the supply air module via the house’s
ventilation system.
A
In the supply air module, the air absorbs the heat energy and the temper-
ature is raised.
B
A fan blows the heated air into those rooms that have supply air inlets.
C
The temperatures are only examples and may vary between different installations and
time of year.
9NIBE SAM 40Chapter 2 | The heating installation – the heart of the
house
Maintenance of SAM 40
Regular checks
Your supply air module requires minimal maintenance after commissioning.
On the other hand, it is recommended that you check your installation
regularly.
If something unusual occurs, messages about the malfunction, in the form
of different alarm texts, appear in the heat pump display.
Cleaning the ventilation devices
The building’s ventilation devices should be
cleaned regularly with, for example, a small
brush to maintain the correct ventilation.
The device settings must not be changed.
NOTE
If you take down more than one ventilation
device for cleaning, do not mix them up.
NIBE SAM 40Chapter 2 | The heating installation – the heart of the
house
10
Altri manuali per SAM 40
3
Indice
Altri manuali Nibe Unità di controllo
Nibe
Nibe RMU S40 Guida utente
Nibe
Nibe MODBUS 40 Guida utente
Nibe
Nibe SMO 20 UK Guida utente
Nibe
Nibe SMO S40 Manuale utente
Nibe
Nibe ACS 45 Guida utente
Nibe
Nibe VCC 28 Manuale utente
Nibe
Nibe MODBUS 40 Guida utente
Nibe
Nibe SMS 40 Guida utente
Nibe
Nibe VVM 320 Manuale utente
Nibe
Nibe PKM 10 Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
