Nibe SMO 20 Manuale utente

User manual

LEK

NIBE™ SMO 20

Control module

UHB GB 1624-5

231759

Quick guide

Navigation

Ok button (confirm/select)

Back button (back/undo/exit)

Control knob (move/increase/reduce)

A detailed explanation of the button functions can be found on page

10.

How to scroll through menus and make different settings is described

on page 15.

temperature1.1

Set the indoor climate

INDOOR CLIMATE

HOT WATER

INFO

HEAT PUMP

The mode for setting the indoor temperature is accessed by pressing

the OK button twice, when in the start mode in the main menu. Read

more about the settings on page 23.

INDOOR CLIMATE

HOT WATER

INFO

HEAT PUMP

off

temporary lux2.1

3 hrs

6 hrs

12 hrs

one time

increase

Increase hot water volume

To temporarily increase the amount of hot water (if a hot water heater

is installed to your SMO 20), first turn the control knob to mark menu

2 (water droplet) and then press the OK button twice. Read more about

the settings on page 39.

In event of disturbances in comfort

If a disturbance in comfort of any type occurs there are some measures

that can be taken before you need to contact your installer. See page

64 for instructions.

Table of Contents

41 Important information

4Installation data

5Safety information

6Serial number

7Contact information

9SMO 20 – An excellent choice

102 The control module – the heart of the house

10Control module's function

10Contact with SMO 20

20Maintenance of SMO 20

223 SMO 20 – at your service

22Set the indoor climate

39Set the hot water capacity

44Get information

48Adjust the heat pump

634 Disturbances in comfort

63Manage alarm

64Troubleshooting

67Additional heating only

685 Technical data

696 Glossary

73Index

3NIBE™ SMO 20Table of Contents |

1 Important information

Installation data

SMO 20Product

Serial number

Installation date

Installer

Type of docking

Accumulator/hot water heater

Heat pump/output size

Add. heat type/power

SetDe-

fault

set-

tings

NameNo.

0 / 9heating curve (offset/curve slope)1.9.1

Serial number must always be given

It is hereby certified that the installation has been carried out according

to instructions in the Installer Manual from NIBEand applicable regulations.

_________________________Signed__________________Date

NIBE™ SMO 20Chapter 1 | Important information4

Safety information

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

Rights to make any design or technical modifications

are reserved.

©NIBE 2016.

NOTE

SMO 20 must be installed via an isolator switch with a minimum

breaking gap of 3 mm.

NOTE

If the supply cable is damaged, only NIBE, its service representative

or similar authorised person may replace it to prevent any danger

and damage.

Symbols

NOTE

This symbol indicates danger to machine or person.

Caution

This symbol indicates important information about what you should

observe when maintaining your installation.

TIP

This symbol indicates tips on how to facilitate using the product.

5NIBE™ SMO 20Chapter 1 | Important information

Marking

SMO 20 is CE marked and fulfils IP21.

The CE marking means that NIBE ensures that the product meets all regu-

lations that are placed on it based on relevant EU directives. The CE mark

is obligatory for most products sold in the EU, regardless where they are

made.

IP21 means that objects with a diameter larger than or equivalent to 12.5

mm cannot penetrate and cause damage and that the product is protected

against vertically falling drops of water.

Serial number

The serial number can be found on the top of the cover for the control

module and in the info menu (menu 3.1).

LEK

Serial number

Caution

Always give the product's serial number when reporting a fault.

NIBE™ SMO 20Chapter 1 | Important information6

Contact information

KNV Energietechnik GmbH, Gahberggasse 11, 4861 SchörflingAT

Tel: +43 (0)7662 8963-0 Fax: +43 (0)7662 8963-44 E-mail: mail@knv.at

www.knv.at

NIBE Wärmetechnik c/o ait Schweiz AG, Industriepark, CH-6246 Alt-

ishofen

Tel: (52) 647 00 30 Fax: (52) 647 00 31 E-mail: inf[email protected] www.nibe.ch

Druzstevni zavody Drazice s.r.o, Drazice 69, CZ - 294 71 Benatky nad

Jizerou

Tel: +420 326 373 801 Fax: +420 326 373 803 E-mail: [email protected]

www.nibe.cz

NIBE Systemtechnik GmbH, Am Reiherpfahl 3, 29223 CelleDE

Tel: 05141/7546-0 Fax: 05141/7546-99 E-mail: inf[email protected]

www.nibe.de

Vølund Varmeteknik A/S, Member of the Nibe Group, Brogårdsvej 7,

6920 Videbæk

Tel: 97 17 20 33 Fax: 97 17 29 33 E-mail: inf[email protected]

www.volundvt.dk

NIBE Energy Systems OY, Juurakkotie 3, 01510 VantaaFI

Puh: 09-274 697 0 Fax: 09-274 697 40 E-mail: [email protected] www.nibe.fi

NIBE Energy Systems France Sarl, Zone industrielle RD 28, Rue du Pou

du Ciel, 01600 Reyrieux

Tel : 04 74 00 92 92 Fax : 04 74 00 42 00 E-mail: inf[email protected]

www.nibe.fr

NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way,

Chesterfield S41 9QG

Tel: 0845 095 1200 Fax: 0845 095 1201 E-mail: inf[email protected]

www.nibe.co.uk

NIBE Energietechniek B.V., Postbus 634, NL 4900 AP OosterhoutNL

Tel: 0168 477722 Fax: 0168 476998 E-mail: inf[email protected]

www.nibenl.nl

ABK AS, Brobekkveien 80, 0582 Oslo, Postadresse: Postboks 64 Vol-

lebekk, 0516 Oslo

Tel. sentralbord: +47 23 17 05 20 E-mail: [email protected] www.ni-

beenergysystems.no

7NIBE™ SMO 20Chapter 1 | Important information

NIBE-BIAWAR Sp. z o. o. Aleja Jana Pawła II 57, 15-703 BIAŁYSTOKPL

Tel: 085 662 84 90 Fax: 085 662 84 14 E-mail: sekretariat@biawar.com.pl

www.biawar.com.pl

Tel./fax +7 831 419 57 06 E-mail: inf[email protected] www.nibe-evan.ru

NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 MarkarydSE

Tel: +46-(0)433-73 000 Fax: +46-(0)433-73 190 E-mail: inf[email protected]

www.nibe.se

For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu

for more information.

NIBE™ SMO 20Chapter 1 | Important information8

SMO 20 – An excellent choice

SMO 20 is an electric control module, which has been introduced to supply

your home with inexpensive and environmentally friendly heating. Heat

production is reliable and economical with a NIBE air/water heat pump

and accumulator/water heater.

An additional heater (for example electric/oil/gas boiler) can engage

automatically if something unexpected should occur or as reserve opera-

tion.

Excellent properties for SMO 20:

■Easy to read display

The control module has an easy to read display with easy-to-understand

menus that facilitate setting a comfortable indoor climate.

■Easy to install

SMO 20 is easy to install together with a compatible NIBE air/water heat

pump. When installing together with these, the control module is con-

nected to the heat pump, which enables you to see any heat pump

alarms in SMO 20. The size of the control module means that it can be

installed on walls indoors for easy access to control your installation.

9NIBE™ SMO 20Chapter 1 | Important information

2The control module – the heart

of the house

Control module's function

SMO 20 is a simple electrical control module, which, together with NIBE

air/water heat pump, accumulator/water heater and additional heater

(e.g. electric/gas boiler), creates a complete installation. Among other

things, it controls the heat pump, circulation pumps, reversing valves and

additional heat to supply your home with inexpensive and environmentally

friendly heating in the most efficient way.

Contact with SMO 20

Display unit

Display

Status lamp

OK button

Back button

Control knob

Switch

INDOOR CLIMATE

HOT WATER

INFO

HEAT PUMP

SMO20 GUSB port

There is a display unit on the front of the control module, which is used

to communicate with SMO 20. Here you:

■switch on, switch off or set the installation to emergency mode.

■set the indoor climate and hot water as well as adjust the installation to

your needs.

■receive information about settings, status and events.

NIBE™ SMO 20Chapter 2 | The control module – the heart of the house10

Altri manuali per SMO 20

Indice

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente