Nordval DC102-4K Manuale utente
NORDVÄL DC102-4K
English
Your smart technology friends.
Copyright© 2021 TJM Supplies B.V. All rights reserved.
Nordväl® is the registered trademark of TJM Zwerink Holding B.V.
Thank you for purchasing the DC102-4K dashcam. Let’s get started!
HELLO,
TABLE OF CONTENTS
Declaration of conformity 02
What's in the box 03
Installing your dashcam 05
Installing with PMPC01 (optional) 07
Connecting to the app 09
Setting the parking mode 10
Playback recordings 11
Frequently asked questions 12
Product specifications 14
1
02
03
05
07
09
10
11
12
14
DECLARATION OF CONFORMITY
Product information
For the following
Product: Dashcam
Type: DC102-4K Dashcam
Declaration and applicable standards
Hereby, TJM Supplies B.V. declares that the type of dashcam DC102-4K series
conforms to: Directive EMC 2014/53/EU and the RoHS directive (2011/65/EU)
and its amendment directives 2015/863/EU on the restriction of the use of
certain hazardous substances in electronic equipment.
The full text of the EU declaration of conformity can be found at the
following internet address: www.nordval.eu/declaration-of-conformity/
Importer
Company: TJM Supplies B.V.
Address: Zompstraat 8
8102 HX Raalte
The Netherlands
Email: [email protected]
Phone number: +31 85-0402973
Business license number: 72016981
VAT number: NL858946439B01
Nordväl® is the registered trademark of TJM Zwerink Holding B.V.
Specifications are subject to change without notice.
Copyright© 2021 TJM Supplies B.V. All rights reserved.
Manufactured in China.
2
Please check the box for each of the following items before installing your dashcam:
Nordväl DC102-4K front and rear camera
Micro SD card
12V power cable (cigarette lighter)
AV cable for rear camera
WHAT'S IN THE BOX
USB cable
Cable clips + pry tool
3M tapes
User manual
DC102-4K Details
Micro SD card slot
Micro USB port
AV-IN
WiFi button +
status LED
Reset button
GPS status LED
Power/recording
status LED
Microphone
3
The blue LED lights up when
the WiFi is turned on.
The red LED will flash when
the dashcam is recording.
The green LED lights up when
the dashcam has GPS reception.
DC102-4K Buttons and functions
DC102-4K LED status
Windshield mounting
4K lens
Button
WiFi
Blue
Red
Green
Enable/Disable WiFi
WiFi status
Press the button for about 3
seconds to turn WiFi on or off.
Press and hold the button for
about 10 seconds to format
the SD card.
Power/recording
GPS status
Function Instructions
LED light Function Meaning
Full HD lens
4
INSTALLING YOUR DASHCAM
Do not install the product in a location where it may obstruct the
driver's field of vision.
Attach the camera to the windshield, behind the rear-view mirror.
Clean and dry the windshield before installation.
Caution
1Turn off the engine. Carefully insert
the micro SD card into the micro SD
card slot until it clicks.
2Remove the plastic film from the front
camera. Remove the protective film
from the 3M tape.
4Adjust the angle of the lens by rotating
the camera about 10° downwards. This
ensures that the camera records with a
good aspect ratio. It is recommended to
maintain a ratio of 2/3 road and 1/3 air.
3Attach the camera to the windshield,
behind the rear-view mirror.
•
•
5
6Remove the plastic film from the rear
camera. Remove the protective film
from the 3M tape.
8Connect the front and rear camera
with the AV cable.
9Start the engine. The dashcam powers up and starts recording. Video files are
stored on the micro SD card. When the micro SD card is full, the newest video files
will replace the oldest video files (loop recording). This means that the SD card
always contains the most recent recordings.
5Plug the 12V power cable into the
car's cigarette lighter and plug the
cable into the dashcam.
7Attach the camera to the rear window
in a place where the view is not
obstructed.
6
INSTALLING WITH PMPC01 (OPTIONAL)
Read this manual carefully before installation and, if in doubt,
consult an authorized installer.
Nordväl is not responsible for any damage caused by incorrect
connection or by not following the instructions in this manual.
•
•
1Stop the engine and remove the fuse box lid.
Refer to your car owner's manual to locate the fuse box and remove the lid.
The location and layout of the fuse box and the type of fuse depends on the
brand and type of vehicle.
2Connect the red ACC(+) fuse to the fuse box.
Find a spare switched fuse or remove a switched fuse from the fuse box.
Then place the red ACC(+) fuse in the referred place.
Caution
7
3Connect the yellow BATT(+) fuse to the fuse box.
Find a spare constant fuse, or remove one from the fuse box.
Then place the yellow BATT(+) fuse in the referred place.
4Connect the black GND wire to a ground point.
Attach the GND wire to a grounding point, such as a bolt located directly on a
metal part of the vehicle frame.
Connect the micro USB cable to the Nordväl dashcam and start the engine. Check
if the dashcam turns on and keeps recording when you stop the engine.
8
Indice
Altri manuali Nordval Telecamera da cruscotto
