OxyCare A360 Manuale utente
A360
HANDHELD PULSE OXIMETER
USER’S MANUAL
VER 1.1 2015/03
A360 Handheld Pulse Oximeter
- 1 -
Instructions
This manual provides the instructions necessary to operate
Pulse oximeter (hereinafter called as the Oximeter) in
accordance with its function and intended use. Observance of
this manual is a prerequisite and correct operation, and
ensures patient and operator safety.
This manual is an integral part of and should always be
kept close to the oximeter, so that it can be obtained
conveniently when necessary.
Content of this manual is subject to change without prior
notice.
Version: 1.1
Statement
The manufacturer is responsible for safety, reliability and
performance of this product only in that:
zAll installation operations, expansions, changes,
modifications and repairs of this product are conducted
by manufacturer authorized personnel; and
zThe electrical installation of the relevant room complies
with the applicable national and local requirements; and
zThis product is operated under strict observance of this
manual.
A360 Handheld Pulse Oximeter
- 2 -
Guarantee
Free service scope
zThe Pulse Oximeter main unit have 5 years service life
and the manufacture provides a two-year warranty. The
SPO2 sensor and other accessories have 1 year service
life.
zThe manufacturer provides free service to any product
which conforms to the warranty regulations.
Chargeable service scope
zThe manufacturer charges customers for service to any
product which is outside warranty regulations’ range.
zThe manufacturer’s obligation or liability under his
warranty does not include the service of any factitious
damage. Or the voltage of power supply network
beyond the product’s specification, or irresistible natural
disaster, or delay resulting from the improper use or
application of the product, or the use of parts or
accessories not approved by the manufacturer, or
repairs by people other than the manufacturer
authorized personnel.
Return Policy
In the event that it becomes necessary to return to the
manufacturer, please obtain a return authorization first.
Please contact the manufacturer’s Service Department and
provides the model number, serial number, and a brief
description of the reason for return. Return shipments will not
A360 Handheld Pulse Oximeter
- 3 -
be accepted if the serial number is not clearly visible.
The customer is responsible for freight charges when this
product is shipped to the manufacturer for service (including
any relevant customs fees or other freight related charges).
A360 Handheld Pulse Oximeter
- 4 -
Chapter 1 Safety Information
The safety statements presented in this chapter refer to the
basic safety information that the operator of the oximeter
shall pay attention to and abide by, There are additional
safety statements in other chapters or sections, which may be
the same as or similar to the followings, or specific to the
operations.
The following safety terms warning and caution are used
throughout this manual to point out hazards and to designate
a degree or level or seriousness.
WARNING
Indicates a potential hazard situation or unsafe
practice that, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potential hazard or unsafe practice that, if
not avoided, could result in minor personal injury or
product/property damage.
NOTE
Provides application tips or other useful information to
that you get the most from your product.
1.1 Warnings
A360 Handheld Pulse Oximeter
- 5 -
WARNING
zThe oximeter is intended only as an adjunct in patient
assessment. It is not intended as a device used for
treatment purposes.
zThe oximeter is intended for use only by qualified
clinical physicians or well-trained nurses.
zTo ensure patient safety, verify this device and
accessories can function safely and normally before
use.
zWhen using the oximeter together with the electrical
surgery equipment, the user should pay attention to and
guarantee safety of the patient being measured.
zEXPLOSION HAZARD: Do not use the oximeter in the
presence of flammable anesthetics, explosive
substances, vapors or liquids.
zDo not pull or lift the oximeter by its connection cable.
That may lead to falling and consequent patient injuries.
zIt is not recommended to hang the oximeter when
transporting patients. Safety hazards may arise from the
large amplitude swing during the transportation.
zMake sure not to use the oximeter and it’s transducer
during MRI (magnetic resonance imaging) scanning
because induced current could potentially cause burns.
The oximeter is capable of interfering with the proper
performance of MRI, and MRI is capable of interfering
with the measurement accuracy of the oximeter.
A360 Handheld Pulse Oximeter
- 6 -
zThe oximeter and its accessories may be contaminated
by microorganism during transporting, use and storage.
Use the recommended methods to sterilize and disinfect
the oximeter or its accessories when the packing
material is damaged, or it has not been used for a long
time.
1.2 Cautions
CAUTION
zThe oximeter is a commonly sealed device. Keep its
surface dry and clean, and prevent any liquid from
infiltrating it.
zThe device should be appropriately placed. Keep it from
falling, strong vibration or other mechanical damage.
zThe oximeter should only be maintained by personnel
approved by our company.
zBefore using the oximeter on patients, the user should
be familiar with its operation.
1.3 Notes
NOTE
zImportant! Before use, carefully read this manual, all
safety information and specifications.
A360 Handheld Pulse Oximeter
- 7 -
Chapter 2 General
2.1 Introduction
The oximeter is a non-invasive, handheld patient Oximeter. It
operates on alkaline or rechargeable battery power supply. It is
compact, small, light, and easy for learning and handling. It is
suitable for monitoring adult and child patients. It is widely used in
the hospital’s operation room, ICU, clinic section office,
out-patient department, sickroom, emergency treatment, and the
recovery and health care organizations, or in the family nursing and
in the process of transporting patients.
Parameters measured by the oximeter include: arterial oxygen
saturation (SpO2), pulse rate (PR), bargraph and plethysmogram.
The oximeter measures these parameters through a SpO2 sensor
and displays them on the color TFT LCD screen after certain
further processing.
The oximeter is operated and controlled by the buttons on the
front panel. It adopts a 2.8 inch color TFT LCD screen in
displaying measurements and in supplementary status indication.
2.2 Features
zLightweight for carrying and Easy-To-Use.
zSilicon rubber shell protection and stable bracket for table
usage.
zUsing DB9 type connector compatible with Nellcor Spo2
Sensor.
A360 Handheld Pulse Oximeter
- 8 -
zSupport the oximeter probe for adult, neonate and infant.
zBig size 2.8 inch color TFT LCD display for
SPO2/PR/Pulse bargraph/plethysmogram.
zVisual and sound alarm function.
zAdjust the parameters in friendly menu.
zLow Battery voltage indicator.
zAutomatically switch off within 3minutes when no signal.
zInner Flash memory can store testing result up to 300 hours
at most.
zUSB interface support upload the data to computer and
review the history data with software in PC.
zStandard 4X AAA 1.5V Alkaline bаttеrуor rechargeable
Li battery is available for power supply
A360 Handheld Pulse Oximeter
2.3 Appearance
- 9 -
Figure 2-1 Front Panel Figure 2-2 Back Panel
Figure 2-3 Top Side Panel Figure 2-4 Right Side Panel
Indice
