Panasonic ET-DLE085C Manuale utente
Thank you for purchasing this Panasonic product.
■Please read these operating instructions and the projector operating instructions carefully, and then use
this product correctly.
■Before using this product, be sure to read “Read this first!” (Page 2).
■Please save this manual for future use.
Model No. ET-DLE085C
TQDJ19190-1
Zoom Lens
Operating Instructions
2-ENGLISH
Read this first!
Supplied Accessories
WARNING:
Before replacing the zoom lens, be sure to turn the power offand disconnect the power plug from the
wall outlet.
Otherwise, an electrical shock may result.
CAUTION:
Supplied accessories and consumables:
Do not open the desiccant bag. Do not eat the contents. (Inadvertently ingesting desiccant could be
harmful.)
If the desiccant gets into your eyes or mouth, immediately rinse with plenty of water and seek medical
attention.
Keep desiccant out of the reach of children.
Make sure that the following has been provided
Part name Appearance (quantity)
Lens cap
1 of each
Always follow these precautions
ENGLISH-3
Before replacing the projection lens
Attaching the Lens
2) Rotate the lens clockwise until you
hear a “click”.
Note
Gently turn the zoom lens counterclockwise to
check that it will not fall out.
1) With the lens mount cover that
came with your projector attached,
align the positioning guide on the
zoom lens with the guide grooves
on the projector, and insert the
zoom lens fully.
There is a red dot at the bottom right end of the
positioning guide.
Attaching the Lens / Detaching the Lens
Guide groove Lens mount cover
Positioning guide
Zoom lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating instructions of the projector.
Attention
Make sure that the projector power supply is switched offbefore attaching or detaching the projection lens.
After removing the projection lens, store it safely away from vibration or impacts.
Do not touch the electric contact points of the projection lens with your fingers. Dust and dirt on the contacts
may cause contact malfunctions.
Remove the lens cap before mounting the zoom lens.
Do not touch the surface of the lens with bare hands. Finger prints and dirt on the surface of the lens will be
magnified by the lens and lower the quality of the projected image. Place the supplied lens cap on the zoom
lens when the projector is not in use.
The lens is made of glass. The lens could be damaged if brought into contact with or rubbed against hard
objects. Handle the lens carefully.
Use a clean, soft and dry cloth to wipe away dust and dirt from the lens.
Do not use fluffy cloths containing oil, water or dust for cleaning. The material in the lens is easily damaged so
do not apply excessive pressure when wiping it.
4-ENGLISH
Detaching the Lens
Focus Adjustment Function
The focal balance between the center and periphery of the projected image changes depending on the size of the
projected image.
The lens is equipped with a focus balance adjustment function for the screen periphery.
Adjusting the Focus
Note
The projected image sizes and scale shown on the periphery focus adjustment ring are an approximate guide.
For details on the projection distance, see the projector specifications (http://pro.panasonic.cn/pj/).
B
A
Lens mount cover
A
C
B
Lens release
button
2) Turn the zoom lens completely
counterclockwise while pressing
the lens release button to detach
the lens.
3) Turn the lens mount cover
clockwise to reattach it.
1) Focus the center of the screen by
operating the projector unit.
2) Turn the periphery focus ring by
hand as shown in the figure to
adjust the focus in the periphery
of the screen.
1) Turn the lens mount cover
counterclockwise to detach it from
the lens and slide it towards the
front end of the lens.
Periphery focus adjustment ring
Attaching the Lens / Detaching the Lens (continued)
ENGLISH-5
F value 1.85 - 2.20
Focal Length (f) 11.8 mm (15/32") - 14.6 mm (9/16")
Dimensions
140 mm (5-1/2")
140 mm (5-1/2")
206 mm (8-1/8")
Net Weight 1.3 kｇ(2.87 lbs.)
Lens Type Zoom lens
Width
Height
Depth
Note
As for projection distance, please refer to the operating instructions of the projector.
Specifications the Lens
Declaration of Chemical Substances
Part Name
Hazardous or Toxic Substances or Elements
Pb Hg Cd Cr（VI）PBB PBDE
Projection lens ○○○○○○
Internal me-
chanical parts ×○○○○○
Accessories ○○○○○○
○: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement in SJ/T11363-2006.
×: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement in SJ/T11363-2006.
Printed in Japan
SS0713AM1042 -PS
:
:
https://panasonic.cn/
: :
2022 4
日本福冈县福冈市博多区美野岛四丁目1番62号
© 松下互联株式会社 2022版权所有
Indice
Altri manuali Panasonic Lente
Panasonic
Panasonic AW-LZ16MD73P Manuale utente
Panasonic
Panasonic ET-D3QW300 Manuale utente
Panasonic
Panasonic ET-EMW200 Manuale utente
Panasonic
Panasonic H-RS100400PP Manuale utente
Panasonic
Panasonic ET-D3LEU100C Manuale utente
Panasonic
Panasonic VW-W4907 Manuale utente
Panasonic
Panasonic ET-ELW21 Manuale utente
Panasonic
Panasonic Lumix H-PS14042 Manuale utente
Panasonic
Panasonic ET-DLE035C Manuale utente
Panasonic
Panasonic ET-D3LEW60 Manuale utente
Panasonic
Panasonic WV-LZ62/8 Manuale utente
Panasonic
Panasonic H-HSA35100PP Manuale utente
Panasonic
Panasonic AW-S14XBRM Manuale utente
Panasonic
Panasonic H-PS14042PP Manuale utente
Panasonic
Panasonic ET-DLE035 Manuale utente
Panasonic
Panasonic ET-PLF10 Manuale utente
Panasonic
Panasonic ET-ELT30C Manuale utente
Panasonic
Panasonic Lumix H-FS14140 Manuale utente
Panasonic
Panasonic VW-CLT1P Manuale utente
Panasonic
Panasonic ET-DLE060C Manuale utente
