Panasonic KXF-013C Manuale utente
Operating Instructions
Model No. KXF-013C
Thank you for purchasing DS10F, the bare board stocker ST.
Before placing the machine in service, be sure to read the instruction manual for
proper usage.
After that, store it carefully and it if necessary.
Bare Board Stocker ST DS10F
Page 3
013C-E-OMA00-C01-00
M11E
WARNING
DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MACHINE.
The machine may be operated improperly and injure you.
Either carry out training by yourself, or consult the manufacturer.
Page 4
DESCRIPTION OF MANUAL CONTENTS
This is the manual for the machine maintenance, and describes
about daily check, adjustment and exchange of consumers.
Also, the troubleshooting is included.
Part 2. Maintenance manual
Part 1. Operating manual
This is the manual for the machine operators, and describes
about operating procedure, cautions and information which is
necessary for operation.
Part 3. Parts List
Parts constructions of each unit is indicated individually by the
exploded view.
Use this for parts order or confirmation of parts construction.
DESCRIPTION OF MANUAL CONTENTS
013C-E-OMA00-C01-00
This specifications consist of the following some contents. Please use it according to your work.
Operating Instructions
CONTENTS
Page 2
SAFETY PRECAUTIONS
013C-E-OMA00-B03-00
SAFETY PRECAUTIONS................................ 5
1FUNCTIONS
1-1 Operation Process Flow Chart ...............................................................1-1
2SPECIFICATIONS
2-1 Specifications of Machine.......................................................................2-1
2-1-1 Outline Specifications .............................................................................2-1
2-1-2 Outer Dimension.....................................................................................2-2
2-1-3 Specifications of Board...........................................................................2-3
3MAJOR COMPONENTS
3-1 Visual Diagram .......................................................................................3-1
3-2 About Main Units ....................................................................................3-2
3-3 Signal Tower...........................................................................................3-3
GENERAL DESCRIPTION
CONTENTS
Page 3
OPERATION
013C-E-OMA00 -B03-01
4BASIC OPERATION
4-1 Operation Switch Panel ..........................................................................4-1
4-1-1 Diagram of Operation panel....................................................................4-1
4-1-2 Contents of Operation Switch .................................................................4-2
4-1-3 How to Set Production Counter(In the case of LC48).............................4-3
4-1-4 How to Set Production Counter (In the case of LC4H) ...........................4-4
5DAILY OPERATION
5-1 Start Automatic Operation ......................................................................5-1
5-1-1 Turn on Machine and Start Automatic Operation ...................................5-1
5-1-2 How to Supply Materials (Boards) ..........................................................5-2
5-1-3 Line Start ................................................................................................5-3
5-2 Production End and Interrupt Production................................................5-3
6CHANGING MACHINE SET UP
6-1 Process of Change .................................................................................6-1
6-1-1 Adjustment of Magazine Width ...............................................................6-1
6-1-2 Adjustment of Conveyor Width ...............................................................6-1
6-1-3 Adjustment of Double Boards Detection Sensor ....................................6-2
6-1-4 Adjustment of Lifter.................................................................................6-3
CONTENTS
Page 4 013C-E-OMA00-B03-01
= MEMO =
Page 5
Be sure to observe
SAFETY PRECAUTIONS
013C-E-OMA00-B04-02
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to failure to read an
indication is classified and described as follows.
The matters should be observed are classified and described according to the
symbols shown below.
(The following is only some examples of the symbolic indications.)
DANGER
WARNING
CAUTION
This indication refers to a situation which is
considered that there is imminent danger of death or
serious injury.
This indication refers to a situation which is
considered that there is a possibility of death or
serious injury.
This indication refers to a situation which is consid-
ered that there is a possibility of only injury or physical
damage.
These symbols indicate matters to which attention
must be paid.
This symbol indicates an action that must not be
carried out.
This symbol indicates an action that must be carried
out.
Page 6
Be sure to observe
SAFETY PRECAUTIONS
0 1 J Q B
g
feeder tables will have
serious injury.
WARNING
013C-E-OMA00-B04-02
Follow the warning indication.
This is a label for ensuring the safe machine use. If you do not observe it, there is a risk of
human injury or damage to property.
The following warning labels are pasted on this machine. Follow the instructions on each label. If a label
has come off, put a new one on a proper position. To order a label from the manufacturer, refer to
PARTS LIST.
Label part No.
Front view of warning label attached positions
M32E
013C-PS001
0 1 J X A
DANGER
DO NOT TOUCH
ACTIVE PART
WHEN
OPERATING
You will have serious
injury if you touch the
active part.
* Stick on the back side of the
machine.
0 1 N G B
WARNING
HIGH VOLTAGE
You will have serious
electric shock if you
touch electric power
supply inside.
Indice
Altri manuali Panasonic Telefono
Panasonic
Panasonic G70E Manuale utente
Panasonic
Panasonic KX-TS550MEB Manuale utente
Panasonic
Panasonic KX-T7730 Manuale utente
Panasonic
Panasonic NS700 Manuale di installazione
Panasonic
Panasonic 96NKX-UT248 Manuale utente
Panasonic
Panasonic KX-T7716C Manuale utente
Panasonic
Panasonic KX-TG2236S Manuale utente
Panasonic
Panasonic KX-TG2740S - 2.4 GHz DSS Expandable Cordless... Manuale utente
Panasonic
Panasonic KX-TD7680 - Digital Wireless Telephone Manuale utente
Panasonic
Panasonic KX-DT 333 Series Manuale utente
Panasonic
Panasonic EASA-PHONE KX-T2365A Manuale utente
Panasonic
Panasonic KX-TG5055 Manuale utente
Panasonic
Panasonic KX-TG6521BXB Manuale utente
Panasonic
Panasonic Easa-Phone KX-T2355 Manuale utente
Panasonic
Panasonic KX-HDV800X Manuale utente
Panasonic
Panasonic KXTSC50B - PHONE/ANSWER MACHINE Manuale utente
Panasonic
Panasonic 524X07801B Manuale utente
Panasonic
Panasonic KX-TC1484 Manuale utente
Panasonic
Panasonic VA-309UK Manuale utente
Panasonic
Panasonic KX-NT400 Manuale utente
