PCE Instruments PCE-G1A Manuale utente

Manual

Environmental Meter PCE-G1A

Version 1.0

Date of creation: 30.11.2015

Date of last change: 30.11.2015

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

[email protected]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

[email protected]

Manual

Contents

1Introduction ............................................................................................................. 3

2Safety notes ............................................................................................................. 3

3Specifications .......................................................................................................... 4

4System description ................................................................................................. 5

5Instructions .............................................................................................................. 6

5.1 Before measurement.................................................................................................................. 6

5.2 Measurement.............................................................................................................................. 6

5.3 Jumper settings .......................................................................................................................... 6

5.4 Calibration and testing................................................................................................................ 6

6Contact ..................................................................................................................... 7

6.1 PCE Instruments UK .................................................................................................................. 7

6.2 PCE Americas ............................................................................................................................ 7

Manual

1 Introduction

Thank you for purchasing a thermo hygrometer from PCE Instruments.

The PCE-G1A measures both relative humidity and temperature. Its large 7-segment LED display with a

figure height of 100 mm makes the measured values easily readable from a distance of up to 50 m. The

thermo hygrometer is IP 54 protected and can be mounted to a wall. The relative humidity and

temperature values are displayed alternately every 5 seconds. The sensors which are calibrated by the

manufacturer are connected to the display by 1 m cables. The passive two-channel analogue output (no

individual power supply!) converts relative humidity and temperature values into a 4 … 20 mA signal

before displaying them. The PCE-G1A comes with a screened multipole plug for connection with a

device. An optional ISO calibration certificate can be ordered separately.

Delivery content

1 x thermo hygrometer PCE-G1A, 1 x sensors with connection cable (1 m), 1 x cable for analogue output,

1 x mains adapter, 1 x instruction manual

2 Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device

may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no

warranty of damages or injuries caused by non-observance of the manual.

- Do not allow the cold humidity sensor to come in contact with warm and humid air. This causes

condensation and totally falsifies the results. Condensation does not damage the sensors nor does it

change its characteristic.

- The humidity sensor is not resistant to acetone or other chemical solvents.

- The device may only be used in the approved temperature range.

- The case should only be opened by qualified personnel of PCE Instruments.

- The instrument should never be placed with the user interface facing an object (e. g. keyboard side on a

table).

- You should not make any technical changes to the device.

- If the filter or sensors become dusted wash them gently with alcohol and let them dry. Mechanical

cleaning is not allowed as it may damage the filter or cause scratches to the sensors.

This user's handbook is published by PCE Instruments without any guarantee.

We expressly point to our general guarantee terms which can be found in our general terms of business.

If you have any questions please contact PCE Instruments.

Manual

3 Specifications

Humidity

Temperature

Measurement range

10 … 95 % RH

0 … 60 °C

Sensor type

Capacitance

Resistance

Display

LED, 2 digits

Accuracy

±2 %

±1 °C

Power supply

220 V, 50 Hz

Dimensions

175 x 250 x 75 mm

Manual

4 System description

Interface

Pin assignment

Manual

5 Instructions

5.1 Before measurement

Before measuring, attach the sensors 1 and 2 to the upper side of the display and install the output in a

current loop if required.

5.2 Measurement

Plug the instrument into a power socket. After several seconds the results of humidity and temperature

will be indicated in the LED display.

5.3 Jumper settings

1. Jumper location

2. Display only relative humidity (%RH) permanently

3. Display only temperature (°C) permanently

4. Display absolute moisture contents (g/m3) alternately with temperature (°C)

5. Display relative humidity (%RH) alternately with temperature (°C)

5.4 Calibration and testing

A periodic testing of the operation of the PCE-G1A can be done using special saturated salts solutions or

humidity generators. Testing and calibration can be carried out by an accredited calibration laboratory on

behalf of PCE. It is recommended to test and calibrate the instrument every 12 months. Testing can also

be done by comparing the results given by PCE-G1A with the results of a reference humidity meter. If

there is a significant difference the instrument can be adjusted. Adjusting can be done by turning a

potentiometer using a small screwdriver. The potentiometer is located below a hole in the lower part of

the probe. Turning it clockwise decreases the humidity results, anticlockwise increases the humidity

results.

Manual

6 Contact

If you have any questions about our range of products or measuring instruments please contact PCE

Instruments.

6.1 PCE Instruments UK

By post:

PCE Instruments UK Ltd.

Units 12/13 Southpoint Business Park

Ensign Way, Southampton

Hampshire

United Kingdom, SO31 4RF

By phone:

02380 987 035

6.2 PCE Americas

By post:

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

33458 FL

USA

By phone:

561 320 9162

Indice

Altri manuali PCE Instruments Strumento di misura

PCE Instruments

PCE Instruments PCE-CSM 5 Manuale utente

PCE Instruments

PCE Instruments PCE-PHM 12 Manuale utente

PCE Instruments

PCE Instruments PCE-HT 110 Manuale utente

PCE Instruments

PCE Instruments PCE-DC 10 Manuale utente

PCE Instruments

PCE Instruments PCE-TDS 200 Manuale utente

PCE Instruments

PCE Instruments PCE-GM 75 Manuale utente

PCE Instruments

PCE Instruments PCE-FM 20 Manuale utente

PCE Instruments

PCE Instruments PCE-JR 911 Manuale utente

PCE Instruments

PCE Instruments PCE-AM 45 Manuale utente

PCE Instruments

PCE Instruments PCE-PMI 1BT Manuale utente

PCE Instruments

PCE Instruments PCE-PH 25 Manuale utente

PCE Instruments

PCE Instruments PCE-PTH 10 Manuale utente

PCE Instruments

PCE Instruments PCE-COG 10 Manuale utente

PCE Instruments

PCE Instruments PCE-127 Series Manuale utente

PCE Instruments

PCE Instruments PCE-VT 1000 Manuale utente

PCE Instruments

PCE Instruments 2452786-62 Manuale utente

PCE Instruments

PCE Instruments PCE-007 Manuale utente

PCE Instruments

PCE Instruments CA 6460 Manuale utente

PCE Instruments

PCE Instruments PCE-360 Manuale utente

PCE Instruments

PCE Instruments PCE-TDS 100 H Manuale utente

PCE Instruments

PCE Instruments PCE-AQD 50 Manuale utente

PCE Instruments

PCE Instruments Laserliner DampMaster Manuale utente

PCE Instruments

PCE Instruments TDS-100H Manuale utente

PCE Instruments

PCE Instruments PCE-TDS 100 H/HS Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente