Perlesmith PSLF2 Manuale utente
1
INSTALLATION INSTRUCTION
PSLF2 [email protected]
Thank you for choosing our product! We strive to provide the best quality and
services for our customers. Would you kindly share your experience on Amazon if
you are satisfied? Should you have any issues, please don't hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
V2.0
2
Supplied Parts List
VESA 200 Plate
b (x1)
Not Included 4mm Drill Bit
Phillips Screwdriver
10mm Masonry Bit
Carpenter's Level
M6 Wrench
c (x1)
M6 Washer
D (x8)
M6x35 Bolt
g (x4)
M6 Washer
k (x4)
Cushioned Nut
o (x3)
Wall Plate with Arm
a (x1)
Horizontal Bars
A (x2)
M4x12 Bolt
d (x4)
M8x20 Bolt
h (x4)
M8 Washer
l (x10)
Plastic Washer
p (x3)
M6x8 Bolt
C (x8)
M6x20 Bolt
f (x4)
M4 Washer
j (x4)
M6/M8 Spacer
n (x8)
M10x80 Concrete
r (x6)
Vertical Bars
B (x2)
M4x30 Bolt
e (x4)
M8x45 Bolt
i (x4)
M4 Spacer
m (x4)
M8x90 Lag Bolt
q (x6)
For parts shortage or damage, please contact us directly by customerservice@perlegear.com.
New delivery will be timely arranged to replace missed or defective parts.
Attention:
US WARNING!
Safety Warning: Thank you for choosing Perlesmith TV mount. For safe application of model
FSLF2, and preventing yourself or others from danger or property loss, please read through this
manual before use. If you do not understand these instructions or have any doubt over safety of
installation, please contact qualified contractor or Perlesmith customer service. Please check
carefully before assembly to ensure no parts missed or damaged. Our customer service representative
will assist you timely in installation to solve the issue of parts shortage or damage. Replacement parts
purchased through authorized distributor will be delivered toyour door. Please do not use defective
parts. Incorrect installation may result in product damage or body injury. Do not apply this product to
any purpose not indicated by Perlesmith. We shall bear no responsibility for any damage or
injury resulted from incorrect installation, incorrect assembly or misuse.
3
Before getting started, let's make sure this mount is
perfect for you!
1. Is your TV VESA equal to/greater than 100x100mm and equal
to/less than 600x400mm?
MAX:600mm
MAX:400mm
2. Does your TV (including accessories) weigh more than
132 lbs (60kg)?
132 lbs
(60kg)
NO --- Perfect!
Yes --- This mount is NOT compatible.
3. What is your wall made of?
CAUTION:
DO NOT install
into drywall alonePerfect!
Drywall with
wood studs? Solid concrete wall?
Perfect!
24"
Yes --- Perfect!
No --- This mount is NOT compatible.
If this mount is NOT compatible, please contact
4
80mm
90mm
10mm
90mm
4mm
Mounting the Wall Plate to the Wall
Step 1
D
D
q
q
l
l
r
16"(406mm)
%ULFNRU&RQFUHWH:DOO
:RRG6WXGV:DOO
5
Step 2 Install VESA Plate to the Back of TV
Option A: Mounting instructions for VESA 100 x 100, 200 x 100, 200 x 200
Attach TV Plate (b) to Mounting Holes on TV using appropriate TV Bolts and TV Washers. Use TV
Spacers if necessary.
Option B: Mounting instructions for VESA 400 x 200
$
&'
1. Attach TV Plate (b) to Horizontal Bars (A), using Bar Bolts (C) and Bar Washers (D).
GWRL M N O
PQ L IQHFHVVDU\
6
Step 2 Install VESA Plate to the Back of TV
1. Attach Vertical Bars (B) to Mounting Holes on TV using appropriate TV Bolts and TV Washers. Use
TV Spacers if necessary.
2. Attach Horizontal Bars (A) to Vertical Bars, using Bar Bolts (C) and Bar Washers (D).
3. Attach TV Plate (b) to Horizontal Bars, using Bar Bolts (C) and Bar Washers (D).
2. Attach Horizontal Bars to Mounting Holes on TV using appropriate TV Bolts and TV Washers. Use
TV Spacers if necessary.
Option C: Mounting instructions for VESA 300 x 300, 400 x 400, 600 x 400
GWRL
MNO
PQLIQHFHVVDU\
$
$
%
&
'
GWRL
MNO PQLIQHFHVVDU\
7
Step 3 Mounting the TV to the Wall Plate
Step 4 Final Installation
3.1 3.2
3.3 3.4
RS
RSF
4.1
F
1. Attach TV Plate Washer (p) and Nut (o) to Upper
Post using included Wrench. Do not tighten Nut.
2. Using an assistant, lift TV, slide TV Plate Nut over
Notch on TV Mount and route Lower Posts through Lower
Post Holes.
3. Attach TV Plate Washers (p) and Nuts (o) to Lower
Posts using included Wrench. Do not tighten Nuts.
4. Level TV, then tighten Nuts on Upper and Lower Posts
securely.
Lower
Posts
TV Plate
Nut
Adjust Tilt if desired:
a. Loosen Tilt Adjustment Nuts on Wall Mount
(behind TV Plate) with included Wrench.
b. Adjust tilt.
c. Tighten Tilt Adjustment Nuts.
8
Step 4 Final Installation
Step 5 All Done
Route TV wires through clips. Level adjustment
F
100-400mm
100-600mm
56-458mm
245mm
640mm
Indice
Altri manuali Perlesmith Rack e supporto
Perlesmith
Perlesmith PSMFK9 Manuale utente
Perlesmith
Perlesmith MD2296 Manuale di programmazione
Perlesmith
Perlesmith PSTVS01 Manuale utente
Perlesmith
Perlesmith PSTM2 Manuale utente
Perlesmith
Perlesmith PSTVMC01 Manuale utente
Perlesmith
Perlesmith PSTVS12 Manuale utente
Perlesmith
Perlesmith PSTVS15 Manuale utente
Perlesmith
Perlesmith PSLF7 Manuale utente
Perlesmith
Perlesmith PSLFK1-24 Manuale utente
Perlesmith
Perlesmith PSSM01 Manuale utente
Perlesmith
Perlesmith PSSS2 Manuale utente
Perlesmith
Perlesmith PSFS03 Manuale utente
Perlesmith
Perlesmith PSTVS06 Manuale utente
Perlesmith
Perlesmith PSSS3 Manuale utente
Perlesmith
Perlesmith PSMFK12 Manuale utente
Perlesmith
Perlesmith PSTVMCO4 Manuale utente
Perlesmith
Perlesmith PSXLF02 Manuale utente
Perlesmith
Perlesmith PSTVS16 Manuale utente
Perlesmith
Perlesmith PSDSK2-1 Manuale utente
Perlesmith
Perlesmith PSSS1 Manuale utente
