Philips HD1301/02 Manuale utente
HD1300 SERIES
2
1
3
A B
DE
110V
120V
220V
240V
C
4
HD1300 SERIES
ENGLISH 6
DANSK 11
DEUTSCH 17
ESPAÑOL 23
SUOMI 29
FRANÇAIS 34
ITALIANO 40
NEDERLANDS 46
NORSK 52
PORTUGUÊS 57
SVENSKA 63
繁體中文 68
76
6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
Thanks to its compact, lightweight design, this iron is ideal for quick ironing
jobs.You can take it along in its handy pouch when you are travelling.
The iron can be used safely at all mains voltages (110-120V/220-240V), as
it is equipped with a voltage selector. If needed, suitable adapter plugs are
available from Philips dealers, service centres, hotel receptions or
hardware shops.
General description (Fig. 1)
AFoldable handle
BMains cord
CDual voltage selector
DTemperature control
ESoleplate and button groove
Important
Read this user manual carefully before you use the appliance and save it
for future reference.
Danger
Never immerse the iron in water.
Warning
Check if the dual voltage selector has been set to the local mains
voltage before you connect the appliance.You can adjust the position
of the dual voltage selector with a coin.Always reset the selector to
position 220/240V after use.This prevents damage if you
inadvertently connect the iron to the wrong voltage.
Do not use the appliance if the plug, the mains cord or the appliance
itself shows visible damage, or if the appliance has been dropped.
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
-
-
-
-
ENGLISH
Never leave the appliance unattended when it is connected to the
mains.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Do not let the mains cord come into contact with the hot soleplate
of the iron.
Caution
If the appliance is provided with an earthed plug, it must be plugged
into an earthed wall socket.
Use an earthed adapter plug if the mains plug does not match the
local wall socket.
Do not connect the appliance to a wall socket intended for shavers.
Do not use the iron in your hotel room simultaneously with another
high-wattage appliance (e.g. a hairdryer) to avoid blowing the fuse.
Check the mains cord regularly for possible damage.
Always place and use the iron on a stable, level and horizontal
surface.
The soleplate of the iron can become extremely hot and may cause
burns if touched.
When you have nished ironing, when you clean the appliance and
also when you leave the iron even for a short while: put the iron on
its heel and remove the mains plug from the wall socket.
The appliance is not intended for regular use.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7
Before rst use
1 Remove any sticker or protective foil from the soleplate.
2 Let the iron heat up to maximum temperature and pass the iron
over a piece of damp cloth for several minutes to remove any
residues from the soleplate.
Preparing for use
Unfolding the handle
1 Pull up the handle to unfold it (‘click’) (Fig. 2).
Setting the temperature
1 Check the laundry care label for the required ironing temperature.
1Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
1Silk
2Wool
3Cotton, linen
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that is not
visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic bres.
2 Set the temperature control to the required ironing
temperature (Fig. 3).
3 Put the iron on its heel.
4 Put the mains plug in an earthed wall socket.
Using the appliance
Note: The iron may give off some smoke when you use it for the rst time.
This stops after a short while.
-
-
-
-
ENGLISH8
Ironing
1 Set the recommended position ironing temperature (see chapter
‘Preparing for use’).
2 Put the iron on its heel.
3 Let the iron to heat up for two minutes before you start ironing.
If you set the temperature control to a lower setting after ironing at a
high temperature, let the iron to cool down for ve minutes before you
continue ironing.
4 Start ironing (Fig. 4).
Tip: Ironing is easier and takes less time if you moisten the article rst.
Ironing without ironing board
When you are travelling, an ironing board is often not at hand. In this case,
spread the tablecloth (or a folded terrycloth towel) on a rm, at surface.
Make sure that the surface is heat-resitant and moisture-resistant. Do not
use a glass or plastic surface.
Cleaning
1 Put the iron on its heel.
2 Remove the mains plug from the wall socket and let the iron cool
down for at least 30 minutes.
3 Wipe the soleplate with a damp cloth and a non-abrasive (liquid)
cleaner.
4 Clean the upper part of the iron with a damp cloth.
Storage
1 Put the iron on its heel (Fig. 5).
2 Remove the mains plug from the wall socket and let the iron cool
down for at least 30 minutes.
3 Push the handgrip support in the direction of the arrow (Fig. 6).
ENGLISH 9
4 Press down the handgrip (Fig. 7).
5 Store the appliance in the pouch.
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment (Fig. 8).
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your
country.
Problem Possible cause Solution
The iron is plugged
in but the soleplate
is cold.
Connection
problem. Check the mains cord, the
plug and the wall socket.
The temperature
control is probably
set to min
Set the temperature
control to the required
position.
-
ENGLISH10
Questo manuale è adatto per i seguenti modelli
4
Indice
Lingue:
Altri manuali Philips Ferro
Philips
Philips GC4620 Manuale utente
Philips
Philips EasySpeed Plus GC2040 Series Manuale utente
Philips
Philips GC8900 Series Manuale utente
Philips
Philips GC9500 Series Manuale utente
Philips
Philips Diva GC148 Manuale utente
Philips
Philips GC7842 Manuale utente
Philips
Philips GC7610 Manuale utente
Philips
Philips HI900/03 Manuale utente
Philips
Philips GC4800 series Manuale utente
Philips
Philips GC4800 series Manuale utente
Philips
Philips HI5900 series Manuale utente
Philips
Philips GC4340/02 Manuale utente
Philips
Philips HI424/23 Manuale utente
Philips
Philips GC3310/02 Manuale utente
Philips
Philips GC800 Manuale utente
Philips
Philips Excel Plus Aquazur HI845 Manuale utente
Philips
Philips GC6600 series Manuale utente
Philips
Philips GC2800 Series Manuale utente
Philips
Philips FC7010 Manuale utente
Philips
Philips 1000 Series Manuale utente
