Pilz PSSu E F PS1 Manuale utente

Operating Manual — No. 21298-EN-04

Decentralised system PSSuniversal I/O

Operating Manual PSSu E F PS1(-T)

PSSu E F PS1(-T)

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made

for internal ur oses.

Suggestions and comments for im roving this documentation will be gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,

SafetyNET ®, the s irit of safety® are registered and rotected trademarks of

Pilz GmbH & Co. KG in some countries.

SD means Secure Digital.

Preface

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1

Contents

Contents Page

Chapter 1 Introduction

1.1 Validity of documentation 1-1

1.1.1 Retaining the documentation 1-1

1.2 Overview of documentation 1-2

1.3 Definition of symbols 1-3

Chapter 2 Overview

2.1 Module structure 2-1

2.1.1 Module features 2-1

2.2 Front view 2-2

Chapter 3 Safety

3.1 Intended use 3-1

3.2 Safety regulations 3-3

3.2.1 Use of qualified personnel 3-3

3.2.2 Warranty and liability 3-3

3.2.3 Disposal 3-3

Chapter 4 Function description

4.1 Module features 4-1

4.1.1 Supply voltage 4-1

4.1.1.1 Current load capacity 4-2

4.1.2 Integrated protection mechanisms 4-4

4.2 Configuration 4-5

4.2.1 Application as a general supply module 4-5

4.2.2 Addresses in the process image 4-5

4.2.3 FS error behaviour 4-6

Chapter 5 Installation

5.1 General installation guidelines 5-1

5.1.1 Dimensions 5-1

5.2 Installing the base module 5-2

5.3 Inserting and removing an electronic

module

5-3

5.3.1 Inserting an electronic module 5-3

5.3.2 Removing an electronic module 5-4

5.3.3 Changing an electronic module during

operation

5-4

Contents

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

Chapter 6 Wiring

6.1 General wiring guidelines 6-1

6.1.1 Mechanical connection of the base

modules

6-2

6.2 Terminal configuration 6-4

6.3 Connecting the module 6-7

Chapter 7 Operation

7.1 Messages 7-1

7.2 Display elements 7-2

7.2.1 Display elements for module diagnostics 7-2

7.2.2 Display elements for the status of the

module supply and periphery supply

7-3

7.3 Status byte 7-4

Chapter 8 Technical details

8.1 Technical details 8-1

8.2 Order reference 8-3

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-1

1.1 Validity of documentation

1 Introduction

11000IntroductionIntroduction1-1.1Validity of documentation1100Validity of documentation1-][BA Einf Gültigkeit_(T)

This documentation is valid for the products PSSu E F PS1 and

PSSu E F PS1-T. It is valid until new documentation is published.

Bestimm _Verwe nd_Zusatz-(T)

The module PSSu E F PS1-T is suitable for use where there are in-

creased environmental requirements (see Technical Details).

Einf Einleitung

This operating manual explains the function and operation, describes

the installation and provides guidelines on how to connect the product .

1.1.1 Retaining the documentation

Retaining the documentation1-Einf Aufbewahren

This documentation is intended for instruction and should be retained

for future reference.

1.2 Overview of documentation

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-2

1.2Overview of documentation1200Overview of documentation1-][BA Einf Übersicht E-Modul

1 Introduction

The introduction is designed to familiarise you with the contents, struc-

ture and specific order of this manual.

2 Overview

This chapter provides information on the product's most important fea-

tures.

3 Safety

This chapter must be read as it contains important information on safety

and intended use.

4 Function Description

This chapter describes the product's individual components.

5 Installation

This chapter explains how to install the product.

6 Wiring

This chapter describes the product's wiring.

7 Operation

This chapter explains the display elements and advises on what to do if

a fault occurs.

8 Technical Details

This chapter contains the product's technical details and order refer-

ence.

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-3

1.3 Definition of symbols

1 Introduction

1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation

that poses an immediate threat of serious injury and death and

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor

injury plus material damage, and also provides information on

preventive measures that can be taken.

NOTICE

This describes a situation in which the product or devices could

be damaged and also provides information on preventive meas-

ures that can be taken.

INFORMATION

This gives advice on applications and provides information on

special features, as well as highlighting areas within the text that

are of particular importance.

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-4

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 2-1

2.1 Module structure

2 Overview

22000OverviewOverview2-2.1Module structure2100Module structure2-][BA bersicht Aufbau

A module consists of

Electronic module and

Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and

are used to connect the field wiring. The electronic modules are inserted

on to the base modules and determine the module's function.

Details of the base modules that can be used are available in the chapter

entitled “Intended Use”.

2.1.1 Module features

Module features2-][Merkmale_Versorgung PS1

Power supply for max. 2.0 A

When the supply voltage is interrupted, the module supply is buffered

for 20 ms.

Separate infeed for periphery supply

Separate infeed for module supply

Infeed for C-rail supply

][Merkm ale_LED P S LEDs for:

–Modulesupply

– Periphery supply

– Module error

][Merkm ale_Zus atz Application range depends on the base module

][Geraetemerkmal_T Coated version of the module:

PSSu E F PS1-T: for increased environmental requirements

2.2 Front view

2 Overview

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

2-2

2.2Front view2200Front view2-BA Frontansicht

][BA_Frontansicht Legende Diag

Key:

A: Electronic module

B: Base module

1: LED for module diagnostics

2: Labelling strip with:

– Name of electronic module

– Order number

– Serial number

– Hardware version number

–2Dcode

3: Labelling strip for the terminal configuration on the base module

4: Name of electronic module

5: Connection level 1

6: Connection level 2

7: Connection level 3

8: Connection level 4

2111

2212

2313

Err

11 21

0V 22

13 23

C24

PSSu E F

PS1

5 V 24V

0V24V

24V 24V

2414

PSSu E F

PS1

312191

000000

001

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Pilz Sistema di controllo

Pilz

Pilz PNOZ mm0.1p Manuale utente

Pilz

Pilz PSS u2 B1 Manuale utente

Pilz

Pilz PSSu H m F DP ETH SD Manuale utente

Pilz

Pilz PSS u2 ES 16DI Manuale utente

Pilz

Pilz PMCprimo MC Manuale utente

Pilz

Pilz PSSuniversal Manuale utente

Pilz

Pilz PSS u2 ES 4IOL Manuale utente

Pilz

Pilz PSS u2 EF 8DI Manuale utente

Pilz

Pilz PNOZ m ES CC-Link Manuale utente

Pilz

Pilz PNOZmulti Manuale utente

Pilz

Pilz PSS u2 ES 4DI Manuale utente

Pilz

Pilz PSS67 IO1 16FDI Manuale utente

Pilz

Pilz PSS u2 ES 4DO R 8A Manuale utente

Pilz

Pilz PNOZ ms1p Manuale utente

Pilz

Pilz PNOZ mmc11p Manuale utente

Pilz

Pilz PNOZ ml1p Manuale utente

Pilz

Pilz PNOZ m ES RS232 Manuale utente

Pilz

Pilz PNOZmulti Series Manuale utente

Pilz

Pilz PNOZmulti Mini Manuale utente

Pilz

Pilz PNOZ m ES 14DO Manuale utente

Pilz

Pilz PMCprimo C Manuale utente

Pilz

Pilz PSS 3032 Manuale utente

Pilz

Pilz PNOZ m ES Profinet Manuale utente

Pilz

Pilz PSSu E S 2AI I se-T Manuale utente

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente