Pilz PSS u2 ES 4DOD 0.5A Manuale utente

PSS u2 ES 4DOD 0.5A

Operating Manual-1003613-EN-01

}Control system PSS u2

}Remote I/O system PSS u2

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 3

Section 1 Introduction 4

1.1 Validity of documentation 4

1.1.1 Retaining the documentation 4

1.2 Definition of symbols 4

Section 2 Overview 6

2.1 Module features 6

Section 3 Safety 7

3.1 Intended use 7

3.2 System requirements 7

3.3 Safety regulations 7

3.3.1 Use of qualified personnel 7

3.3.2 Warranty and liability 8

3.3.3 Disposal 8

Section 4 Function description 9

4.1 Block diagram 9

4.2 Supply 9

4.3 Outputs 9

4.4 Reaction times 10

4.5 Energy-saving functions 10

Section 5 Address assignment 11

Section 6 Installation 12

6.1 General installation guidelines 12

6.1.1 Dimensions 12

6.2 Inserting and removing an electronic module 13

6.2.1 Inserting an electronic module 13

6.2.2 Removing an electronic module 15

6.2.3 Changing an electronic module during operation 15

Section 7 Wiring 16

7.1 General wiring guidelines 16

7.1.1 Connection mechanism for terminal blocks 16

7.2 Terminal configuration 17

Section 8 Operation 18

8.1 Display elements and messages 18

Section 9 Technical details 20

Section 10 Order reference 22

10.1 Product 22

10.2 Accessories 22

Introduction

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 4

1 Introduction

1.1 Validity of documentation

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

This documentation is valid for the product PSS u2 ES 4DOD 0.5A. It is valid until new doc-

umentation is published.

1.1.1 Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.2 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 5

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 6

2 Overview

Module structure:

A module consists of

}An electronic module

}A terminal block with cage clamp terminals and

}A backplane

The electronic modules are plugged into the backplane and determine the function. The

backplane is used for communication between the head module and the electronic modules

and forms the carrier unit for the electronic modules. The terminal block is plugged into the

electronic modules and is used to connect the field wiring.

Details of the terminal blocks that can be used are available under "Intended Use".

2.1 Module features

Using the product PSS u2 ES 4DOD 0.5A:

Electronic module with digital outputs and expanded diagnostics for standard applications

The product has the following features:

}4 Digital outputs

– Semiconductor technology

– Single-pole

– Positive-switching

– Current load capacity per output: 0,5 A

– Short circuit-proof

– Overload-proof

}Energy-saving functions

}The module provides advanced diagnostic data:

– Overload

– Short circuit

– Undervoltage

}LEDs for:

– Switch status per output

– Module error

– Operating status

Safety

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 7

3 Safety

3.1 Intended use

The module provides digital standard outputs and may be used for standard applications in

the PSS u2 system.

Intended use includes making the electrical installation EMC-compliant. The module is de-

signed for use in an industrial environment. Interference may occur if used in other areas.

The following is deemed improper use in particular

}Any component, technical or electrical modification to the module,

}Use of the module outside the areas described in this manual,

}Any use of the module that is not in accordance with the technical details.

The module PSS u2 ES 4DOD 0.5A may be used in conjunction with the following terminal

block:

}8-pin terminal block

3.2 System requirements

INFORMATION

The module is supported by

}PASconfig from Version 1.0.0

– We recommend that you always use the latest version (download

from www.pilz.com).

3.3 Safety regulations

3.3.1 Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,

maintained and decommissioned by competent persons.

A competent person is someone who, because of their training, experience and current pro-

fessional activity, has the specialist knowledge required to test, assess and operate the

work equipment, devices, systems, plant and machinery in accordance with the general

standards and guidelines for safety technology.

It is the company’s responsibility only to employ personnel who:

}Are familiar with the basic regulations concerning health and safety / accident preven-

tion

}Have read and understood the information provided in this description under "Safety"

}And have a good knowledge of the generic and specialist standards applicable to the

specific application.

Safety

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 8

3.3.2 Warranty and liability

All claims to warranty and liability will be rendered invalid if

}The product was used contrary to the purpose for which it is intended

}Damage can be attributed to not having followed the guidelines in the manual

}Operating personnel are not suitably qualified

}Any type of modification has been made (e.g. exchanging components on the PCB

boards, soldering work etc.).

3.3.3 Disposal

}When decommissioning, please comply with local regulations regarding the disposal of

electronic devices (e.g. Electrical and Electronic Equipment Act).

Function description

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 9

4 Function description

4.1 Block diagram

0 V

Module

Supply

Data

(ST)

Periphery

Supply

+24 V DC

Module Bus

Fig.: Block diagram PSS u2 ES 4DOD

4.2 Supply

}The module supply provides the module with voltage.

}The periphery supply provides the outputs with voltage

4.3 Outputs

Signals at the output

}"0" signal (0V) at the output:

– Output is high impedance

– No current to the load

}"1" signal (+24V) at the output:

– Output is low impedance

– Current is supplied to the load

Outputs

}The head module sets the output status via the module bus.

If the module does not receive a process image of outputs from the head module, then sub-

stitute values are used for the process data. The value that is to be used as the substitute

value can be configured.

Substitute values may be:

}Output switched off (default value)

}Output switched on

}Last valid value

Function description

Operating Manual PSS u2 ES 4DOD 0.5A

1003613-EN-01 10

4.4 Reaction times

You can find information about the reaction times in the operating manual for the head

module PSSu2P0 F/S PN.

4.5 Energy-saving functions

The energy-saving levels are controlled by the head module and are not configurable. The

module supports the following energy-saving levels:

}Switching off the LEDs

The LEDs have two energy-saving levels:

– Switching off the LEDs to display the terminal status

– Switching off the LEDs to display the module and terminal status

}Switching off the terminals

– The module switches off the voltage at the digital outputs.

}Standby mode

– All module functions are inactive.

– The LEDs for displaying the module and terminal status are switched off.

Altri manuali per PSS u2 ES 4DOD 0.5A

Indice

Altri manuali Pilz Unità di controllo

Pilz

Pilz PIT es Set10u-5ns (AIDA) basic Manuale utente

Pilz

Pilz PNOZ mc1p Manuale utente

Pilz

Pilz PNOZ mmc1p Manuale utente

Pilz

Pilz PSSu E F PS1-T Manuale utente

Pilz

Pilz PNOZ mi1p Manuale utente

Pilz

Pilz PNOZ ms4p Manuale utente

Pilz

Pilz PNOZ po3.1p Manuale utente

Pilz

Pilz PSSu E S INC 24V se Manuale utente

Pilz

Pilz PIT es Set10u-5c PCB Manuale utente

Pilz

Pilz PSSu E F 4DI-T Manuale utente

Pilz

Pilz PNOZ m ES Profibus Manuale utente

Pilz

Pilz PNOZ mmc4p Manuale utente

Pilz

Pilz PNOZ po3p Manuale utente

Pilz

Pilz PNOZ mc6p Manuale utente

Pilz

Pilz PNOZ mc5.1p Manuale utente

Pilz

Pilz PMCtendo SZ Manuale utente

Pilz

Pilz PSSu E PD1-T Manuale utente

Pilz

Pilz PNOZ mc10p Manuale utente

Pilz

Pilz PSSu E PD Manuale utente

Pilz

Pilz PNOZ mi1p Manuale utente

Pilz

Pilz PNOZ mc7p Manuale utente

Pilz

Pilz PNOZ mc3p Manuale utente

Pilz

Pilz PDP67 F 8DI ION Manuale utente

Pilz

Pilz PRBT 6 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente