Pilz PSSu E PD Manuale utente

PSSu E PD(-T)

Operating instructions 21304-EN-04

}Decentralised system PSSuniversal I/O

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating instructions PSSu E PD(-T)

21304-EN-04 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.1.1 Retaining the documentation 5

1.2 Definition of symbols 5

Section 2 Overview 7

2.1 Module structure 7

2.2 Module features 7

2.3 Front view 8

Section 3 Safety 10

3.1 Intended use 10

3.2 Safety regulations 11

3.2.1 Use of qualified personnel 11

3.2.2 Warranty and liability 11

3.2.3 Disposal 11

Section 4 Function description 12

4.1 Block diagram 12

4.2 Module features 12

4.2.1 Functions 12

4.3 Configuration 12

4.3.1 Addresses in the process image 12

Section 5 Installation 13

5.1 General installation guidelines 13

5.1.1 Dimensions 13

5.2 Installing the base module 14

5.3 Inserting and removing an electronic module 15

5.3.1 Inserting an electronic module 16

5.3.2 Removing an electronic module 17

5.3.3 Changing an electronic module during operation 17

Section 6 Wiring 18

6.1 General wiring guidelines 18

6.1.1 Mechanical connection of the base modules 18

6.2 Terminal configuration 20

Section 7 Operation 22

7.1 Messages 22

7.2 Display elements 22

7.2.1 Display elements for module diagnostics 22

Section 8 Technical details 23

Contents

Operating instructions PSSu E PD(-T)

21304-EN-04 4

Section 9 Order reference 25

9.1 Product 25

9.2 Accessories 25

Introduction

Operating instructions PSSu E PD(-T)

21304-EN-04 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the products PSSu E PD and PSSu E PD-T. It is valid until

new documentation is published.

The module PSSu E PD-T is suitable for use where there are increased environmental re-

quirements (see Technical Details).

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.1.1 Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.2 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating instructions PSSu E PD(-T)

21304-EN-04 6

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating instructions PSSu E PD(-T)

21304-EN-04 7

2 Overview

2.1 Module structure

A module consists of

}Electronic module and

}Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and are used to connect

the field wiring. The electronic modules are inserted on to the base modules and determine

the module's function.

Details of the base modules that can be used are available in the chapter entitled “Intended

Use”.

2.2 Module features

The product has the following features:

}The module routes the periphery supply from the module bus to the base module ter-

minals.

}LED for:

– Periphery supply

}Application range depends on the base module

}T-type:

PSSu E PD-T: for increased environmental requirements

Overview

Operating instructions PSSu E PD(-T)

21304-EN-04 8

2.3 Front view

2111

2212

2313

2414

(C)

14 24

PSSu E

24V

24V 24V

PSSu E

312195

000000

001

Key:

}A: Electronic module

}B: Base module

}1: LED for module diagnostics

}2: Labelling strip with:

– Name of electronic module

– Order number

– Serial number

– Hardware version number

– 2D code

}3: Labelling strip for the terminal configuration on the base module

}4: Name of electronic module

}5: Connection level 1

}6: Connection level 2

}7: Connection level 3

}8: Connection level 4

Overview

Operating instructions PSSu E PD(-T)

21304-EN-04 9

}9: Square mounting holes (connection levels 1, 2, 3 and 4)

– With screw to loosen/tighten the screw terminal on base modules with screw termin-

als

– With mechanism to operate the cage clamp on base modules with cage clamp ter-

minals

}10: Round connection holes (connection levels 1, 2, 3 and 4) for connecting the signal

lines

}11: Mounting slot for colour marker to label the connection level (connection levels 1, 2,

3 and 4)

Safety

Operating instructions PSSu E PD(-T)

21304-EN-04 10

3 Safety

3.1 Intended use

The module may be used for additional connections to the periphery supply. The periphery

supply can be drawn from the connections, but may not be fed through that route.

The module PSSu E PD-T is suitable for use where there are increased environmental re-

quirements (see Technical Details).

Intended use includes making the electrical installation EMC-compliant. Please refer to the

guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use

in an industrial environment. It is not suitable for use in a domestic environment, as this can

lead to interference.

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the module

}Use of the module outside the areas described in this manual

}Any use of the module that is not in accordance with the technical details.

INFORMATION

The module is supported by

}PSSuniversal Configurator and PSSuniversal Assistant from Version

1.4.0

}PAS4000 from Version 1.0.0

– We recommend that you always use the latest version (download

from www.pilz.de).

The PSSu E PD module may be used in conjunction with the following base modules:

}PSSu BP 1/8 S

}PSSu BP 1/8 C

}PSSu BP-C 1/8 S

}PSSu BP-C 1/8 C

}PSSu BP 1/12 S

}PSSu BP 1/12 C

}PSSu BP-C1 1/12 S

}PSSu BP-C1 1/12 C

The module PSSu E PD-T may be used in conjunction with the following base modules:

}PSSu BP 1/8 S-T

}PSSu BP 1/8 C-T

}PSSu BP-C 1/8 S-T

}PSSu BP-C 1/8 C-T

}PSSu BP 1/12 S-T

}PSSu BP 1/12 C-T

}PSSu BP-C1 1/12 S-T

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Pilz Unità di controllo

Pilz

Pilz PNOZ mc6p Manuale utente

Pilz

Pilz PSEN ma1.3a/b-22 Manuale utente

Pilz

Pilz PSSu K S 16DO 0.5 Manuale utente

Pilz

Pilz PSSu E F PS1-T Manuale utente

Pilz

Pilz PNOZ ms3p Manuale utente

Pilz

Pilz PSSu E F 2DO 2 Manuale utente

Pilz

Pilz PSSu E S INC 24V se Manuale utente

Pilz

Pilz PNOZ m ES Profibus Manuale utente

Pilz

Pilz PITmode flex visu Manuale utente

Pilz

Pilz P1HZ X1 Manuale utente

Pilz

Pilz PNOZ mc5.1p Manuale utente

Pilz

Pilz PNOZ mmc1p Manuale utente

Pilz

Pilz PSSu E F 2DI 60-R Manuale utente

Pilz

Pilz PNOZ ms1p Manuale utente

Pilz

Pilz PNOZ mc10p Manuale utente

Pilz

Pilz PNOZ ms4p Manuale utente

Pilz

Pilz PIT si1.1 Manuale utente

Pilz

Pilz PNOZ m EF 1MM Manuale utente

Pilz

Pilz PSEN ma1.4n-51 Manuale utente

Pilz

Pilz PMCprotego S1--2 Manuale utente

Pilz

Pilz PNOZ m0p Manuale utente

Pilz

Pilz PIT gb Series Manuale utente

Pilz

Pilz PSSu E AI SHT2 Manuale utente

Pilz

Pilz PNOZ m EF 4DI4DOR Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente