Pittsburgh 64202 Istruzioni per il montaggio

64202

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

3 PC. MICROMETER SET

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back

of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt

in a safe and dry place for future reference. 23k

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

Read this material before using this

product. Failure to do so can result in

serious injury. SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. 64202

Specifications

Maximum Range

Small:1″

Medium: 2″

Large: 3″

Maximum Throat Depth

Small:15/16″

Medium: 1-1/4″

Large: 1-5/8″

Accuracy 0.0001″

Increments 0.0001″

Important Safety Information

1. This product is not a toy. Do not allow

children to play with or near this item.

2. Use the correct product for your

application. The correct product will

do the job better and safer at the

rate for which it was designed. Do

not modify Micrometer or use it for a

purpose for which it is not intended.

3. Check for binding of moving parts,

breakage of parts and any other condition

that may affect the Micrometer’s operation.

If damaged, have the Micrometer

repaired and calibrated before use.

4. Keep Micrometer away from water,

oil, solvents and any other liquids.

5. Do not lubricate the Micrometer’s

moving parts.

6. Do not exceed the capacity of Micrometer.

7. Do not disassemble Micrometer.

8. Wear ANSI-approved

safety goggles during use.

9. Keep work area clean and well lit.

10.Do not operate when tired or

when under the influence of

alcohol, drugs or medication.

11. Use as intended only.

12.Inspect before every use; do not use

if parts are loose or damaged.

13.Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Page 3For technical questions, please call 1-888-866-5797.64202

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this document including all text under subheadings therein

before set up or use of this product.

Note: Instructions apply to Small,

Medium and Large Micrometers.

1. Clean measuring faces.

2. Turn Ratchet Stop clockwise until

ratcheting stops and clicks.

3. Verify “0” on Thimble is lined

up with “0” on Sleeve.

4. To adjust (if needed), lock Spindle

with Locking Device.

Note: Sleeve has a pin hole

for Spanner to adjust.

5. Adjust Sleeve with Spanner until “0” on

Thimble is lined up with “0” on Sleeve.

Frame Sleeve

Spanner

Locking Device Thimble Ratchet Stop

Spindle

Anvil

6. Example: To read 0.3141″, see Figure A.

Thimble

Sleeve

Figure A

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Parts are listed and shown for illustration purposes only, and are not

available individually as replacement parts. Reference UPC 193175512345.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Altri manuali Pittsburgh Strumento di misura

Pittsburgh

Pittsburgh 63656 Manuale utente

Pittsburgh

Pittsburgh 67801 Manuale utente

Pittsburgh

Pittsburgh 63730 Istruzioni per il montaggio

Pittsburgh

Pittsburgh Pittsburgh Laser Range Finder Manuale utente

Pittsburgh

Pittsburgh 63714 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63731 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63731 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63615 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 95701 Manuale utente

Pittsburgh

Pittsburgh 93294 Guida di riferimento rapido

Pittsburgh

Pittsburgh 63647 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63712 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63711 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63714 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63586 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 58231 Istruzioni per il montaggio

Pittsburgh

Pittsburgh 63613 Istruzioni per il montaggio

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente