Planet EPN-102 Manuale utente

Networking & Communication

Quick Installation Guide

GEPON SFU ONU

EPN-102 / EPN-104

Important Safety Instructions



Do not use the GEPON ONU in high humidity or high

temperatures.



Do not use the same power source for the GEPON ONU

as other equipment.



Do not open or repair the case yourself. If the GEPON

ONU is too hot, turn off the power immediately and have it

repaired at a qualified service center.



Avoid using this product and all accessories outdoors.



Place the GEPON ONU on a stable surface.



Only use the power adapter that comes with the package.

Using a different voltage rating power adaptor may

damage the ONU.

Package Content

EPN-102 / EPN-104



EPN-102 / EPN-104 Unit



CD-ROM containing the user’s manual, quick guide



Quick Installation Guide



Power Adapter



RJ-45 cable x 1

If any of the above items are missing or damaged, contact your

local dealer for support.

-2-

Hardware Installation

Please connect the ONU to you devices as follow:

Connecting the RJ-45 network cable.

a. Plug-in the RJ-45 cable to 10/100/1000 GE Port

(EPN-102 only) or 10/100 FE Ports.

b. Plug-in the other side to your host or devices.

Connecting the fiber cable.

Before connecting, please note:

Keep the optical connector and the optical fiber clean.

Make sure the bending diameter of the fiber is more

than 6cm.Otherwise; the optical signal loss may be

increased.

Cover a protective cap to guard against dust and water

when the fiber is not used.

a. Remove the protective cap of the optical fiber.

b. Remove the protective cap of the ONU optical

interface (PON interface). Insert the fiber into the

PON interface.

Connecting Power Adapter.

a. Connect the power adapter to the power socket

on the ONU.

b. Insert the other end into a power outlet.

c. Turn on the power-switch.

-3-

Figure-1 EPN-102 connection diagram

Figure-2 EPN-104 connection diagram

-4-

Verifying the Installation

After power on the ONU, the Power LED will be bright and

system starts to boot. When system is ready, the PON LED will

be flash.

If the PON connection is normal, the PON LED will be off and

Link LED is ON.And then you can enjoy the high bandwidth

connection via PON technology.

Further Configuration

The above steps introduce simple installations and

configurations for EPN-102 / EPN-104. For further information of

Specification, features and applications etc, please refer to the

user’s manual in the CD. If you have other questions, please

contact the local dealer or distributor where you purchased this

product.

2011-BA0020-000

Altri manuali per EPN-102

Indice

Altri manuali Planet Router di rete

Planet

Planet IGS-801M Manuale utente

Planet

Planet FGSW-2620VM Series Manuale utente

Planet

Planet Enterprise WiFi System Manuale utente

Planet

Planet ADSL 2/2+ VoIP Router IAD-200W Manuale utente

Planet

Planet WNRT-627 Manuale utente

Planet

Planet FGSD-1022VHP Manuale utente

Planet

Planet WSD-800 Manuale utente

Planet

Planet PL-802 Manuale utente

Planet

Planet ADE-3410 Manuale utente

Planet

Planet IGS-10020 Manuale utente

Planet

Planet WAP-200N Manuale utente

Planet

Planet ADE-3400 Manuale utente

Planet

Planet Gaw9.2Z18-4 Manuale utente

Planet

Planet GS-4210-24P2S Manuale utente

Planet

Planet FGSW-4840S Manuale utente

Planet

Planet WDRT-1202AC Manuale utente

Planet

Planet GSD-802S Manuale utente

Planet

Planet FGSW-2620VM Series Manuale utente

Planet

Planet ADE-4301A Manuale utente

Planet

Planet FNSW-4800 Manuale utente

Planet

Planet XRT-101A Manuale utente

Planet

Planet SW-504 Manuale utente

Planet

Planet WSD-800 Manuale utente

Planet

Planet ISW-800M Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza