Planet GS-4210-8P2T2S Manuale utente
8-Port 10/100/1000T 802.3at PoE +
2-Port 10/100/1000T +
2-Port 100/1000X SFP Managed Switch
GS-4210-8P2T2S
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
4. Logon to the Console .................................................................................. 6
5. ConguringIPAddressviatheConsole ........................................................ 7
6. SavingtheCongurationviatheConsole...................................................... 9
7. Starting Web Management .........................................................................10
8. SavingCongurationviatheWeb ...............................................................12
9. RecoveringBacktoDefaultConguration.....................................................13
10. Customer Support .....................................................................................14
3
1. Package Contents
Thank you for purchasing PLANET 8-Port 10/100/1000T 802.3at PoE + 2-Port
10/100/1000T + 2-Port 100/1000X SFP Managed Switch, GS-4210-8P2T2S.
“Managed Switch” mentionedinthisGuidereferstotheGS-4210-8P2T2S.
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
zTheManagedSwitchx1
zQuickInstallationGuidex1
zRS-232toRJ45Cablex1
zRubberFeetx4
zTwoRack-mountingBracketswithAttachmentScrewsx1
zPowerCordx1
zSFPDustCapx2
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS-232 serial port, while the other
endtotheconsoleportoftheManagedSwitch.
zEthernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ-45connectors.
The above PC is installed with Web Browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the Managed Switch. If the Web interface of the Managed Switch
is not accessible, please turn off the anti-virus software or firewall
andthentryitagain.
5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to the RJ45 type of the console port of the Managed
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS-232 to RJ-45 Cable
Console Port
RJ-45
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud :115200
zDatabits :8
zParity :None
zStopbits :1
zFlowcontrol :None
Figure 3-2: COM Port Conguration
6
4. Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch, and
the terminal will display “running testing procedures”. Then, the following message
asks to log-in user name and password. The factory default user name and
passwordareshownasfollows,andtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Figure 4-1: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1. For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
7
5.ConguringIPAddressviatheConsole
TheWGSWManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP address
1.Atthe“GS-4210-8P2T2S#”prompt,enter“show ip”.
2.The screendisplaysthe currentIP address,SubnetMask andGatewayasshown
inFigure5-1.
Figure 5-1: IP Information Screen
8
Conguring IP address
3.Atthe“GS-4210-8P2T2S#”prompt,enter“congure”.
4.At the “GS-4210-8P2T2S(cong)#” prompt, enter the following command
andpress<Enter>asshowninFigure5-2.
GS-4210-8P2T2S(cong)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210-8P2T2S(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2: IP Address Screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the WGSW Managed Switch will apply the new
IP address setting immediately. You can access the Web interface of the WGSW
ManagedSwitchthroughthenewIPaddress.
Note
Ifyouarenotfamiliarwithconsolecommandortherelatedparam-
eter,enter“?”anytimeinconsoletogetthehelpdescription.
9
6.SavingtheCongurationviatheConsole
In the switch, the running conguration le stores in the RAM. In the current
version, the running conguration sequence running-cong can be saved from the
RAMtoFLASHbywritingthecommandorcopying the running-cong startup-
cong command, so that the running conguration sequence becomes the startup
congurationle,whichiscalledcongurationsave.
1.At the “GS-4210-8P2T2S#” prompt, enter “copy running-cong startup-
cong” asshowninFigure6-1.
Figure 6-1: The Conguration Screen
10
7. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet connection.
Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ-45/UTP Cable
IP Address:
192.168.0.100
Figure 7-1: IP Management Diagram
Logging in to the Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password“admin”.TheloginscreeninFigure7-2appears.
DefaultUsername:admin
DefaultPassword:admin
Figure 7-2: Login Screen
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Planet Interruttore
Planet
Planet DHR-800 Manuale utente
Planet
Planet IGSW-24040T Manuale utente
Planet
Planet GSW-1602SF Manuale utente
Planet
Planet FSD-504HP Manuale utente
Planet
Planet ISW-500 Manuale utente
Planet
Planet FSD-804PS Manuale utente
Planet
Planet XGSW-28040HP Manuale utente
Planet
Planet HPOE-1200G Manuale utente
Planet
Planet WSW-2401 Manuale utente
Planet
Planet FSD-804P Manuale utente
Planet
Planet GS-5220-16S8CR Manuale utente
Planet
Planet SGS-6341 Series Istruzioni per l'installazione
Planet
Planet GSD-1222VHP Manuale utente
Planet
Planet FGSW-2612PVS Manuale utente
Planet
Planet FSD-Series Manuale utente
Planet
Planet GSD-802S Manuale utente
Planet
Planet KVM-800 Manuale utente
Planet
Planet IFB-244-SLC Manuale utente
Planet
Planet IGS-504HPT Manuale utente
Planet
Planet GSW-1602SF Manuale utente
