Planex Mini-mfp Manuale utente

10/100Mbps 2Port USB2.0

MFP Server

Mini-MFP

Quick Installation Guide

English Ver.1.0

STEP 1

10/100Mbps

2Port

USB2.0

MFP

Server

..................................

Introduction .................................................................................................................................

Package Contents .....................................................................................................................

OS Requirements ......................................................................................................................

Physical Description ................................................................................................................

Connect The Server ................................................................................................................

Install Control Center .............................................................................................................

Configure This Server with Control Center .............................................................

Set Up Printers ............................................................................................................................

Use File Sharing .........................................................................................................................

Use Network Scanning Function ...................................................................................

Upgrade Firmware ...................................................................................................................

Default Parameters .................................................................................................................

Quick

Installation

Guide CONTENT S

Introduction

This document describes how to install and configure PLANEX Mini-MFP

USB MFP Server (in the following referred to as Server) as a

Print/File/Scan server and the MFP Server Control Center Software (in

the following referred as Control

Center).Please refer to the User’s

Manual in the bundled CD for more details.

This document is only for Windows users.

If you use this Server in Unix/Linux,please refer to the User’s Manual

in the bundled CD for more details.

Package

Contents

If any item is missing,please contact the shop where you bought this

Server.

Mini-300PU

CD-ROM (User’s Manual & Utility)

Quick Installation Guide

AC Adapter

Warranty Card

Requirements

1. Windows 98 SE/ME/2000/XP/2003

2. Unix,Linux ,Apple OS X 10.3x and RFC-1179 LPD System

10/100Mbps 2Port USB2.0 MFP Server STEP 1

STEP 1 10/100Mbps 2Port USB2.0 MFP Server

STEP 110/100Mbps 2Port USB2.0 MFP Server

Physical

Description

1. Power Adaptor Connector: DC IN 5V/2A adaptor

2. Reset Button: print the configuration page and initialize this Server

3Ethernet Connector: a twisted pair category 5cable

4. USB Host Ports: USB 1.1/2.0 low,full,and Hi-Speed compliant

5. Indicators

Power Indicator is lit while power is applied.If it is not lit,or if it

blinks,there is a problem with this Server or power adapter.

Link Status is lit while network is applied.If it is not lit,it indicates

that this Server does not connect to the network.

Status Indicator blinks to indicate network activity.

USB1Indicator is lit while a USB device connects to USB1Port of

this Server.If it is not lit,or if it blinks,there is a problem with the

USB device or this Server.

USB2Indicator is lit while a USB device connects to USB2Port of

this Server.If it is not lit,or if it blinks,there is a problem with the

USB device or this Server.

Connect

The

Server

1. Connect this Server to the network,such as a LAN switch or a LAN

hub,using a LAN cable.

2. Connect this Server to USB printers,hard drives or flash ROM disks,

and HP all-in-one series printers (AIO/MFP) using USB cables.

3. Connect this Server to the power jack using the power adaptor

(included in this package).

Mini-MFP

Install

Control

Center

1. Insert the included CD into the personal computer.The Autorun

screen as Figure 1should appear.

2. Click Install Utility button.

3. Click Next,if you see any Next button in installation windows.

4. Click Finish.

Configure

This

Server

with

Control

Center

Using Control Center (Figure 2):

1. Open Control Center.It will automatically search the existing Servers

and display their statuses.

2. Select the Server that you want to configure.Double click the selected

Server and enter Administrator (default: admin) and Password

(default: 0000).

10/100Mbps 2Port USB2.0 MFP Server STEP 1

STEP 1 10/100Mbps 2Port USB2.0 MFP Server

FFiigguurree

11::

AAuuttoorruunn

FFiigguurree

22::

MMFFPP

SSeerrvveerr

CCoonnttrrooll

CCeenntteerr

SSooffttwwaarree

STEP 110/100Mbps 2Port USB2.0 MFP Server

3. Name your Server and select a codepage for file server function as

Figure 3. Please enter the Server’s Host Name and Workgroup Name

for Windows networking by SMB protocol.The default Host Name is

Mini-MFP and Workgroup Name is WORKGROUP.If you want to use

the file server function,you have to set the same codepage as that

your Windows PC is using.

4. Assign IP address to this Server as Figure 4. Please choose one method

to set the IP address of the Server.You can automatically get IP by

using DHCP or manually assign an IP to the Server.

Mini-MFP

FFiigguurree

33::

SSeett

SSeerrvveerr

NNaammee

aanndd

CCooddeeppaaggee

FFiigguurree

44::

TTCCPP//IIPP

SSeettttiinngg

Set

Printers

You can set up your network printer using steps below.

Add

Network

Printer

A.Use

Add

Printer

Function

Control

Center

Start Control Center,select your Server,and click Add

Printer

(Figure 5).

10/100Mbps 2Port USB2.0 MFP Server STEP 1

STEP 1 10/100Mbps 2Port USB2.0 MFP Server

SStteepp

Set up Local

Windows Printer

Driver

SStteepp

Connect Your Printer to the

Server and Connect the

Server to Network

SStteepp

Turn on Your

Printer and the

Server

SStteepp66

Turn on OOnnlliinnee

UUsseePPrriinntteerrin

Installed Windows

Printer Driver

SStteepp55

Add Network Printer by

Windows Standard

Method

Control Center

SStteepp44

Configure Your

Server

Note: If you want to install HP all-in-one series printer drivers in

Windows, you are advised to connect the MFP to PC during

installation.

FFiigguurree

55::

AAdddd

PPrriinntteerr

STEP 110/100Mbps 2Port USB2.0 MFP Server

Select USB1Port or USB2Port in Add

printer box,choose to use

Address or Host

Name to represent the Server in printer port,

and select Print

with

LPR

(Line

Printer

Remote),

with

Raw

TCP

/JetDirect

Mode,

or Print

with

Network

Path

(SMB)

in Select

the

network

printing

protocol

box (Figure 6).

1. If your Server is running on a different LAN than your

Windows PC,you must choose IP

address in Select

Address

Host

Name

printer

port

box.

2. SMB Protocol is compatible with Windows 98SE/ME/2000/

XP/2003. LPR and Raw TCP protocols are compatible with

Windows 2000/XP/2003.

3. Click Apply.

4. Select the desired printer driver and click Set

Port

Printer.

5. Click OK.

6. If you cannot find any printer driver in Printer List,please

install your printer driver first or click Add

New

Printer to

install the printer driver.

Mini-MFP

FFiigguurree

66::

PPrriinntteerr

SSeettttiinngg

ffoorr

MMFFPP

SSeerrvveerr

CCoonnttrrooll

CCeenntteerr

B.Use

Standard

Windows

Add

Printer

Wizard

Windows Platform: Windows 98SE/ME/2000/XP/2003

Network Printing Protocol: SMB/CIFS

1. Open Printers

and

Faxes

2. Right-click the printer for which you want to change settings,

and then click Properties.

3. Click the Ports

tab.

4. Clear Enable

bidirectional

support and click Create

new

port,and then click Local

Port in the Port

Type section.

5. In the Port

Name box,type the path to the printer in the

following format: \\

Server’s

Host

Name\printer

name or \\

Server’s

address

\printer

name

(Please refer to the Server’s

Web pages or Control Center to know the exact path).For

example: if you set the Server’s Host Name as Mini-MFP and

printer name (USB1port) as

Photosmart

2,then the network

path is expressed as: \\Mini-MFP\Photosmart

2as shown in

Figure 7.

If your Server is running on a different LAN than your

windows PC,you have to type IP address in Port

Name box.

6. Click OK,and then select a Windows driver for your printer.If

you already have the printer’s driver installed,you will be

asked whether to keep it or to replace it.Click Next.

7. Choose whether you want to share the printer with other

network users.Do you want to print a test page? Select the

appropriate radio button and click Next and Finish.

10/100Mbps 2Port USB2.0 MFP Server STEP 1

STEP 1 10/100Mbps 2Port USB2.0 MFP Server

FFiigguurree

77::

PPrriinntteerr

SSeettttiinngg

ffoorr

LLooccaall

PPoorrtt

STEP 110/100Mbps 2Port USB2.0 MFP Server

Use

File

Sharing

File

System:

This Server supports a file format of FAT12/16/32. It does

not support a drive formatted by NTFS,etc.

Naming

Your

Storages: The local drives of the two storages in USB1

port and USB2port are named as USBx_DyPz,where USBx represents

the USBx port,Dy represents the the y-th Disk and Pz represents the

z-th partition.

Setting

Codepage: This Server supports Windows codepages.If you

want to communicate files with this Server,you have to set your

Server codepage to be same as the codepage that your Windows PC is

using.

Using

SMB

Method

for

Sharing

Storages

1. Connect a USB storage device to this Server.

2. Select My

Network

Places

3. Click Display

the

Computers

Workgroup

4. Double click Microsoft

Windows

Network icon.

5. Double click the Workgroup

that this Server belongs to.The default

Workgroup Name is WORKGROUP.You can refer to Control Center

or this Server’s Web pages to get it.You will see that the Server will

be displayed as the default Host Name "Mini-MFP" or the Host

Name that you set.

6. If you cannot find Workgroup Name or Host Name in Microsoft

Windows Network,you can select Search

Computer

Network

Places

and type the Server’s Host Name or IP address (eg,default

Host Name Mini-MFP) to find it.

7. Double click the Host Name icon.The folders will be displayed as

USB1_DyPz and USB2_DyPz where Dy represents the y-th disk and

Pz represents the z-th partition with respect to USB1port and USB2

port.

Mini-MFP

Altri manuali per mini-mfp

Indice

Altri manuali Planex Server

Planex

Planex MZK-NAS01SG Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

Planex mini-mfp Manuale utente

Manuali Server popolari di altre marche