5
User Manual
UPI-5D
SET-UP MODE : ACCESS AND OPERATION
Figure 3.1
Section 3
Press PAGE
key to enter
Set-up mode
Use UP/DOWN
keys to set the
Desired Page Number
MAIN Display
Mode
Readout
shows ‘PAGE’
Default Page
Number
(Operator Page)
or
Desired Page
Number
Press ENTER
key to open
the Page
Press ENTER
key to open
the Page
The requires various user settings that determine how the indicator will function or operate. These settings are called Indicator
Parameters.
For the convenience and ease of operation, the various parameters have been grouped separately depending upon the
functions they define. Each such group is called a PAGE. Each PAGE is assigned a unique number, called PAGE NUMBER,
for its access. The parameters contained in a PAGE are presented in a fixed sequence to the user for setting. The user can
access a desired PAGE by entering its PAGE NUMBER and can select and set the desired parameter values.
PARAMETER SNAME
Each parameter has an identifying tag, called the Parameter . While setting parameter values in a PAGE, the arameter Name P
Name P precedes the arameter Value.
While the r adout shows Parameter Name, the UP DOWN keys are non-functional. pon pressing the key the e / U ENTER
readout shows the arameter Value that can be adjusted using UP / DOWN keys.P
ACCESSING A PAGE & ADJUSTING PARAMETER VALUES
Each PAGE is accessible only from the MAIN Display Mode. That is, from the current PAGE, the user must return to the MAIN
Display Mode before the other PAGE can be accessed.
Step through the following sequence to open PAGE and to adjust the parameter values.a desired
1. Press and release PAGE key. The eadout shows . R PAGE
2. Press and release ENTER key. The Readout shows , the default page value. 0
3. Use UP/DOWN keys to set the desired PAGE NUMBER.
4. Press and release ENTER key. The Readout shows Name for the first available parameter under the selected page
number.
5 . Press and release ENTER key. The Readout shows value for the first parameter.
6 Go to step 8 if the value for first parameter is to be edited..
7. Press & release Enter Key until the readout shows the name for the desired parameter.
8. Use UP / DOWN keys to adjust the value and then press ENTER key to store the set value and scroll to the next parameter.
9 7. Go to step .
The indicator automatically reverts to MAIN Display Mode upon scrolling through the last parameter. Alternatively, use PAGE
key to return to MAIN Display Mode.
Figure 3.1 illustrates the example of altering the value for the parameter ‘Input Type’ from ype .T K Thermocouple to 4-20 mA
