Pramac P7500i Manuale utente

Operator's manual

Portable Generator

P Inverter series

P3000i P3500i/O P3500i

P7500i

Printed in Italy All rights are reserved, in particular the world-wide applicable copyright, right of

duplication and right of distribution.

This document may only be used by the recipient for the intended purpose. The document

may not be reproduced entirely or partially, or translated into any other language.

Reproduction or translation, even extracts thereof, only with written approval of PR Industrial

s.r.l.

Any breach of the statutory provisions, in particular the protection of copyright, will lead to

civil and criminal prosecution. PR Industrial s.r.l. constantly working on the improvement of its

products as part of the technical further development. Therefore, we reserve the right to make

changes to the illustrations and descriptions in this documentation without incurring any

obligation to make changes to machines already delivered.

Errors excepted. The machine on the cover may have special equipment (options).

Manufacturer

PRIndustrials.r.l.

Loc. Il Piano

53031 Casole d’Elsa (SI) - Italy

Tel.: +39 0577965200

E-mail address: info@pramac.com

Original operator's manual

 
 
 
 
 
 

 
Foreword 6 
Introduction 7 
1 Means of representation for this operator's manual 7 
2 PRAMAC representative 8 
3 Described machine types 8 
4 Identification of themachine 8 
Safety Regulations 9 
1 Safety information in this operator's manual 9 
2 Description and purposeof the machine 10 
3 Operational safety 11 
4 Operator qualifications 12 
5 Safety when using combustion engines 14 
6 Service safety 15 
Safety and informationlabels 17 
Standard package 18 
Lifting and transporting 19 
Operation 20 
1 Prepare the machine for first-time application 20 
2 Accessories Installation (only for P7500i) 21 
3 Power requirements 22 
4 Performance loss with high altitude application 23 
5 Ground 24 
6 Heavy duty operation 24 
7 Installation 24 
8 Use of extension cables 25 
9 Control Panels 27 
10 Control Functions 29 
11 Before starting 33 
12 Starting the engine 35 
13 Stopping the Engine 36 
Maintenance 38 
1 Period maintenance schedule 38 
2 Engine oil replacement 39 
3 Air filter maintenance 40 
4 Muffler screen and spark arrestor Maintenance 40 
5 Fuel Filter Maintenance 41 
6 Spark plug 42 
7 Battery 42 
8 Long-term storage 44 

9 Basic troubleshooting 46

10 Disposal 47

10.1 Disposal of waste electrical and electronic equipment 47

11 Technical data 48

11.1 P3000i 48

11.2 P3500i 49

11.3 P3500i/o 50

11.4 P7500i 51

12 Diagram 52

12.1 P3000i 52

12.2 P3500i 53

12.3 P3500i/o 54

12.4 P7500i 55

EC declaration of conformity 56

1 Foreword

1. Foreword

This operator's manual contains important information and proceduresfor the safe,

proper and economic operation of this PRAMAC machine. Carefully reading,

understanding and observing is an aid to avoiding hazards, repair costs and

downtime, and therefore to increasing the availability and service life of the

machine.

This operator's manual is not a manual for extensive maintenance or repair work.

Such work should be carried out by PRAMAC service or by technically trained

personnel. The PRAMAC machine should be operated and maintained in

accordance with this operator's manual. An improper operation or improper

maintenance can pose dangers. Therefore, the operator's manual should be

constantly available at the location of the machine.

Defective machine parts must be exchanged immediately!

If you have any questions concerning the operation or maintenance, a PRAMAC

contact person is always available.

2 Introduction

2. Introduction

2.1 Means of representation for this operator's manual

Warning symbols

This operator's manual contains safety information of the categories: DANGER,

WARNING, CAUTION, NOTICE.

They should be followed to prevent danger to life and limb of the operator or

damage to equipment and exclude improper service.

DANGER

This warning notice indicates immediate hazards that result in serious injury or

even death.

➢Danger can be avoided by the following the actions mentioned.

WARNING

This warning notice indicates possible hazards that can result in serious injury or

even death.

➢Danger can be avoided by the following the actions mentioned.

CAUTION

This warning notice indicates possible hazards that can result in minor injury.

➢Danger can be avoided by the following the actions mentioned.

NOTICE

This warning notice indicates possible hazards that can result in material damage.

➢Danger can be avoided by the following the actions mentioned.

Notes

Note:Complementary information will be displayed here.

Instructions

➢This symbol indicates there is something for you to do.

1. Numbered instructions indicate that you have to carry out something in a

defined sequence.

2 Introduction

▪This symbol is used for lists.

2.2 PRAMAC representative

Depending on your country, your PRAMAC representative is your

PRAMAC service, your PRAMAC affiliate or your PRAMAC dealer.

You can find the addresses in the Internet at WWW.PRAMAC.COM

The address of the manufacturer is located at the beginning of this

operator's manual.

2.3 Described machine types

This operator's manual is valid for different machine types from a product range.

Therefore some figures can differ from the actual appearance of your machine.

It is also possible that the descriptions include components which are not a

part of your machine.

Details for the described machine types can be found in the chapter

Technical data.

2.4 Identification of the machine

Nameplate data

The nameplate lists information that uniquely identifies your machine. This

information is needed to order spare parts and when requesting additional

technical information.

➢Enter the information of your machine into the following table:

Designation

Your information

Group and type

Construction year

Code no.

Serial no.

Questo manuale è adatto per i seguenti modelli

Altri manuali Pramac Generatore portatile

Manuali Generatore portatile popolari di altre marche

Kohler

Kohler 20EORZ Manuale di istruzioni

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente