Prexiso PR500HVG Manuale utente
IMPORTANT:
Read before Using EN
PR500HVG
SELF-LEVELING ROTARY LASER
www.prexiso-eu.com
WARRANTY
LIMITED
YEARS
2
1
PR500HVG
IMPORTANT SAFETY INSTRUCTIONS
Do not use the product before you have studied the Safety instructions and the
User Manual on the enclosed CD or on our Homepage.
If you have no such manual, or it is in the wrong language, please ask your agency
for an appropriate copy.
The product is permitted to use for skilled persons only.
WARNING:
•
It is a Class 2 laser product in accordance with IEC 60825-1:2014
•
The following labels are on your laser tool for your convenience and safety.
•
Do not stare into the laser beam or direct it towards other people unnecessarily.
•
Don't dazzle other individuals.
A measurement could be triggered at any time.
•
Looking directly into the beam with optical aids can be hazardous.
•
Do not operate the product in explosion hazardous areas or in aggressive
environments.
•
Only use chargers recommended by the manufacturer to charge the batteries.
•
Keep extremities in a safe distance from the moving parts.
•
Watch out for erroneous measurements if the product is defective or if it has been
dropped or has been misused or modified.
•
Carry out periodic test measurements.
Particularly before, during and after important measurements.
•
The product and batteries must not be disposed of with household waste.
2
LASER RADIATION!
Do not stare into beam
Class 2 laser
< 1mW 500-540nm
IEC 60825-1:2014
WARNING!
The goggles do not protect your eyes against the laser beam.
They are only used to increase the visibility of the laser.
Goggles:
PRODUCT OVERVIEW
PARTS DESCRIPTION
A
B
C
D
E
F
G
Alignment Sight
Vertical Up Beam Window
Rotary Laser / Glass Enclosed
Keypad
Battery lock switch
Power Adapter Plug Jack
Vertical support dot
PARTS DESCRIPTION
H
I
J
K
L
M
N
5/8" insert
5/8" insert
Charger
Plug(EU, China)
Plug(US, Japan, China)
Plug(Australia)
Plug(UK)
A
B
C
D
E
F
G
H
I
3
K
N
M
L
PR500HVG
J
KEYPAD AND LED
Up
On/Off Tilt warning on/off
Scan mode
/Speed Slope
Down Left Right
LEDs
POWER-LED
MAN-LED
•
Blinking Green: Laser Tool is Auto-Leveling In
Calibration and / or Default Tilt Warning Set Up
•
Solid Green: Auto-Leveling Complete
•
Blinking Red: Low Battery
•
Solid Red: Battery Needs Recharging
•
Solid Red With POWER-LED – Solid Green:
Manual Mode On (Auto-Leveling Off)
•
Blinking Red With POWER-LED – Blinking
Green: Out of Compensation Range
•
Solid Green: Tilt Warning On
•
Solid Red: Tilt Warning Alarm
•
Solid Green: X Axis Adjust Slope Mode
•
Blinking Green:
X Axis at Maximum Allowed Slope in Slope Mode
X Axis Adjust Calibration Mode
•
Solid Red: Y Axis Adjust Slope Mode
•
Blinking Red:
Y Axis at Maximum Allowed Slope in Slope Mode
Y Axis Adjust Calibration Mode
TILT
Y/Z
4
PR500HVG
RC300 REMOTE CONTROL
5
RC300
+
-
%
1. Light indicator
2. Speed switch button(Press this button to switch the laser
beam rotating speed from 300rpm->600rpm->0rpm->300rpm).
3. Laser dot moving button (Press this button to clockwise
move the laser dot).
4. Speed switch button(Press this button to switch the laser
beam rotating speed from 300rmp->0rpm->600rpm->300rpm.
5. Slope
6. Laser dot moving button (Press this button to anticlockwise
move the laser dot).
7. Scan mode/Speed
8. Battery lid (Open the battery lid and insert
2 x1.5V AA batteries into the battery compartment).
1
5
6
7
8
2
3
4
BATTERIES AND POWER
WARNING:
•
Use charging / power adapter only with Li-Ion battery pack supplied.
Charging any other type of battery may result in damage and/or personal harm.
•
The battery and charging / power adapter can be damaged if damp.
Always store and charge the tool in a dry and covered place.
NOTE:
•
For best battery life, it is recommended to charge the battery once it has been fully
discharged and avoid letting charge for >10 hours at a time.
Operating with Charging / Power Adaptor
•
Laser tool can operate while plugged into charging / power adapter.
Functions and controls of laser tool are the same as when not plugged into
charging / power adapter.
WARNING:
•
Pay close attention to the battery
holder’s (+) and (-) markings for
proper battery insertion. Batteries
must be of same type and
capacity. Do not use a combination
of batteries with different
capacities remaining.
Battery Installation / Removal
Li-Ion Battery version
Alkaline Batteries version
6
PR500HVG
SET UP
OPERATION
Operation in Auto Mode
•
Press to turn on the instrument.
•
Green LED is blinking green when the instrument start to leveling.
TILT LED is off (TILT Function is not on by default), the laser is glitter.
•
After leveling, the laser dot starts to rotate(the default speed is 300rpm),laser
is kept bright, Green LED and TILT LED are solid green.
•
The instrument will be warning when it is tilted, and rotating will be stopped, the
laser will be glitter, TILT LED is solid red. Press to reset.
•
Press to turn off the instrument.
Horizontal Position
•
Place laser tool down on its bottom.
Be sure surface is near level.
•
Press to power ON.
At Angle
•
Press to power ON. Press and hold to turn ON Mnual Mode. Laser tool can now
be positioned to various angles with auto-leveling mode OFF.
NOTE:
To change between horizontal and vertical positions the laser tool must be powered
OFF, repositioned, and then powered ON in the new position.
Vertical Position
•
Place laser tool down on its side,
handle facing up. Be sure surface
is near level.
•
Press to power ON.
7
Operation in Manual Mode
•
Press and hold for 3 seconds to turn on Manual Mode when the instrument is
in Auto Mode or TILT Mode.
Green LED is solid green, and Red LED is solid red.
•
The Auto-leveling function is off, the instrument can place at any less
than 50°angle.
•
Press and hold for 3 seconds in Manual Mode to turn off Manual Mode, the
instrument will back to Auto-leveling Mode.
Speed Switch/Spot Mode
•
After Powered on and Auto-leveling or in Manual Mode (Not in SLOPE function),
the default speed is 300rpm:
(1) Short press to switch speed, followed by looping from
300rpm->600rpm->0rpm->300rpm;
(2) Short press to switch speed, followed by looping from
300rpm->0rpm->600rpm->300rpm.
•
At 0rpm or Scan Mode(Not in SLOPE function):
(1) Press the laser dot will anticlockwise motion;
(2) Press the laser dot will clockwise motion;
At 0rpm:
(1) Short press / the rotation angle of laser dot is 10°.
(2) Long press / the laser dot will rotate at 0.5-1rpm.
(3) Press and hold / ＞4 seconds, the laser will blinking
3 times to remind the laser start to speed up, after that the laser
will rotate at 7.5-10rpm.
(4) Release / the laser dot will back to 0rpm.
•
In Scan Mode:
(1) Short press / the scan angle will rotate 6°, the scan function is kept.
(2) Long press / the scan will be stopped, the laser dot willrotate at
0.5-1rpm.
(3) Press and hold / ＞4 seconds, the laser will blinking 3 times to remind
the laser start to speed up, after that the laser will rotate at 7.5-10rpm.
(4) Release / it will back to scan function.
Remark:
When the rotation speed is switched from 300rpm to 0rpm for 0.5 seconds,
the output power of instrument will be low power, switched from 0rpm to scan
function or rotation for 1 second, it will be high power.
8
Scan Mode
•
Turn on the Scan Mode:
(1) Short press to turn on scan function, the default angle is 15°
(2) Short press again to turn off scan function.
•
Scan angle switch:
(1) Short press to switch the scan angle, followed by loop from
15°->30°->60°->15°.
(2) Short press to switch the scan angle, followed by loop from
15°->60°->30°->15°.
TILT function
TILT Operation and Reset
•
Press to turn on the instrument;
LED is blinking green when the instrument start to leveling.
Short press , the TILT LED will be solid green, the laser is glitter.
•
After Auto-leveling, the laser starts to rotate.
•
After Auto-leveling, if the instrument is tilted, it will be warning, the rotation will be
stopped, and the laser is kept bright. TILT LED is solid red.
•
Press again, the instrument will reset and enter TILT function again, and
re-leveling.
TILT Mode switch
•
Press to switch to Auto-leveling Mode in TILT Mode, TILT LED will be off.
Remark:
When the instrument is in Manual Mode, it can not switch to TILT
function; If necessary, please resume to Auto Mode.
Operation in Slope function
Horizontal Slope function:
•
First to turn on the Manual Mode after the instrument is powered on.
The is solid green, and the is solid red.
Short press to enter the slope function, the LED is solid green ,
it indicates the instrument is in X axis manual slope function.
Remark:
(In TILT Mode also need to enter the Manual Mode first, then press to enter the
slope mode).
•
/ can control the laser tilt along the X axis.
9
Press the laser will raise at +X direction of the instrument.
Press the laser will lower at +X direct of the instrument.
*A single short press the laser will tile 20".
*Press and hold / ＞1 second, the laser will tile 15'/second.
*Press and hold / ＞4 seconds, the laser will tile 1°/second.
•
The will blinking green when the tile is over run. Release / , the
will be solid green.
•
Press to switch to Y axis manual slope functuon, the is solid red.
•
/ can control the laser tilt along the Y axis.
Press the laser will raise at +Y direction of the instrument.
Press the laser will lower at +Y direct of the instrument.
(The key-hold time and adjustment amount are same as X axis.)
•
The will blinking green when the tile is overrun.
Release / , the will be solid green.
•
Short press to quit slope function, and back to Manual Mode.
The is off, is solid green and is solid red;
The horizontal slope function can only be entered in Manual Mode,
it will resume to Manual Mode when quit the slope function.
Vertical Slope function:
•
When powered on in vertical state, enter the Auto-leveling Mode, the
is blinking green, and the instrument starts to leveling.
Short press to enter the vertical slope function(Z axis is Autoleveling),
the is solid red.
(In vertical TILT Mode also can enter Slope Mode, TILT and Slope
function can exist concurrently)
•
The operation of vertical slope function is the same as horizontal slope function.
•
Short press to quit slope function, and resume to Auto Mode.
10
Indice
Altri manuali Prexiso Strumento di misura
Prexiso
Prexiso PXX-400 Manuale utente
Prexiso
Prexiso P15M-3LI Manuale utente
Prexiso
Prexiso G5 Series Manuale utente
Prexiso
Prexiso PR500HV Manuale di istruzioni
Prexiso
Prexiso P20LI Manuale utente
Prexiso
Prexiso iC4 Manuale utente
Prexiso
Prexiso P70DLI Manuale utente
Prexiso
Prexiso PLT40LI Manuale utente
Prexiso
Prexiso XL2 Manuale utente
Prexiso
Prexiso PTX-99 Manuale utente
Prexiso
Prexiso P20 Manuale utente
Prexiso
Prexiso P40T Manuale utente
Prexiso
Prexiso P60L Manuale utente
Prexiso
Prexiso T.O.2 Manuale utente
Prexiso
Prexiso PMX-42A Manuale utente
Prexiso
Prexiso P15 Manuale utente
Prexiso
Prexiso P40A Manuale utente
Prexiso
Prexiso P30M Manuale utente
Prexiso
Prexiso PMX-42B Manuale utente
