
BConfigurationSheetsofBIOSSetupUtilityParameters
■Peripheral Configuration Submenu
()The initial values have been unchan
ed.
Setting
Peripheral Configuration
Serial 1: Auto ( )Disabled ( )Enabled ( )OS Controlled
Serial Port1 Address: *1 3F8h,IRQ 4 ( )2F8h,IRQ 3 ( )3E8h,IRQ 4
2E8h,IR
3
Serial Multiplexer: System ( )iRMC
Serial 2: Auto ( )Disabled ( )Enabled ( )OS Controlled
Serial 2 Address: *2 2F8h,IRQ 3 ( )3F8h,IRQ 4 ( )3E8h,IRQ 4
2E8h,IR
3
Parallel: Auto ( )Disabled ( )Enabled
Parallel Mode: Bidirection ( )Printer ( )EPP ( )ECP
Parallel Address: *3 378h,IRQ 7 ( )278h,IRQ 5 ( )3BCh,IRQ 7
USB Host Controller: Enabled ( )Disabled
USB 2.0 Host Controller: Enabled ( )Disabled
USB BIOS Supported Devices: Auto ( )None ( )Keyboard/Mouse ( )All
USB Boot Delay: 0s ( )3s ( )6s ( )9s
USB BIOS Hot-Plug: Enabled ( )Disabled
ATA Controller Config Links to ATA Controller Config submenu
Diskette Controller: Enabled ( )Disabled
Mouse Controller: Auto Detect ( )Disabled ( )Enabled
Onboard Video: Enabled ( )Disabled
LAN Controller: Enabled ( )Disabled
LAN Remote Boot Disabled ( )PXE
Management LAN: Enabled ( )Disabled
*1:Appears when "Enabled" is selected for [Serial 1].
*2:Appears when "Enabled" is selected for [Serial 2].
*3:Appears when "Enabled" is selected for [Parallel].
■ATA Controller Config Submenu
()The initial values have been unchan
ed.
Setting
ATA Controller Config
S-ATA Mode: Native ( )Compatible ( )AHCI
P-ATA Map to: *1 Secondary ( )Disabled ( )Primary
Primary IDE Channel: Enabled ( )Disabled
Secondary IDE Channel: *1 Enabled ( )Disabled
Tertiary IDE Channel: *2Enabled ( )Disabled
Quaternary IDE Channel: *2Enabled ( )Disabled
*1:Appears when "Compatible" is selected for [S-ATA Mode].
*2:Appears when "Native","AHCI" is selected for [S-ATA Mode].
Item Initialvalue
Item Initialvalue
8