Pro-Ject Audio Systems Power Box RS Amp Manuale utente

INSTRUCTIONS FOR USE

Pro-Ject Power Box RS Amp

Dear music lover,

thank you for purchasing a Pro-Ject Audio Systems Power Box RS Amp.

In order to achieve maximum performance and reliability you should study these instructions for use

carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that

the voltage in your area meets the voltage requirements printed on the device.

Never handle the device while your hands are wet or damp.

Avoid letting liquids e

nter the device. Never place any item containing liquid, such as a flower vase

on or near the device. Never spill any liquid on the device or cables. Never place any naked flame

sources, such as lighted candles on or near the device. The product shall not

be used in damp or wet

locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Connecting Power Box RS Amp

Connect the power cable to the unitand to the mains. Then use special supplied cable to connect the

Power Box RS Amp with the amplifier(s). Then the original power supply of the amplifier is no longer

required.

Make all connections whilst the Power Box RS Amp is

switched off or disconnected from the mains

Power Box RS Amp is designed only for Pro-Ject Audio Systems products with 2x48V power supply.

Amp Box DS, Amp Box DS Mono, Stereo Box RS, Amp Box RS, Amp Box RS Mono

and for any future

product with 2x48V power supply. Products with different input voltage cannot be used with the

Power Box RS Amp.

Connection to one amplifier

Any of listed Pro-Ject amplifiers

can be connected

Connection to two amplifiers

Connect only mono versions of the

amplifiers

Incorrect use

Power Box RS Amp is not designed

to drive two stereo amplifiers

Main power switch

The toggle switch on the left side will turn the unit on or off. The blue LED above the switch shows that the

unit is switched on.

Technical specifications Pro-Ject Power Box RS Amp

Input voltage: AC 230V/50Hz IEC C15 connector (120V/60Hz US version)

Output voltage: two outputs by 2 x 48V / 2.5A DC each

Filtration capacity: 40.000 µF

Output voltage ripple: 7mV peak to peak

Dimensions W x H x D: 201 x 72 x 195mm

Weight: 4,8kg

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer

for further advice. Only if the problem cannot be resolved there, the unit should be sent to the

responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these

instructions for use. Modification or

changes to any part of the product by unauthorized persons

release the manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going

to press. The manufacturer reserves the right to

make

changes to the technical specification

without prior notice as deemed necessary to

uphold the ongoing process of technical

development.

Indice

Altri manuali Pro-Ject Audio Systems Amplificatore

Pro-Ject Audio Systems

Pro-Ject Audio Systems Amp Box SE Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box S Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Amp Box Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box SE Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box DS2 Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject MaiA Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box Design Pre Box RS2 Digital Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box DS Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box DS2 Analogue Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Remote Box S2 Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems DS2 Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box SE II Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Amp Box RS Mono Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems power box ds Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box SE II Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Stereo Box S Phono Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems MaiA Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box S Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box S2 Digital Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box SE II Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject MaiA DS Manuale utente

Pro-Ject Audio Systems

Pro-Ject Audio Systems AMP BOX DS Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente