10. Key Functions :
11. Meter Measurement Scrolling :
13. Trip function :
14 . Setting/Configuration Modes :
Display can be set as auto scroll/Manual scroll Scrolling mode can be
changes from auto to manual & ice versa by long press (Maxi than 3 sec) of
increment key.
In auto scroll the measurement display changes to next page automatically
while in manual mode (scroll) measurement page can be selected by
pressing forward & backward keys.
Trip function enables the used to have reading of selected cumulative
measurement between any two selected time. Please refer 14.5 for
resetting the trip reading.
This mode is password protected. Set values can be changed in this mode
(Editable setting are indicated in table 15.1 along-with setting range)
12. KVA Measurement Method :
3d
Arthematic
Recommended method of measurement in case of distorted/
unbalance load condition.
Conventional method of measurement.
14.1 EDIT Mode :
KEY
Decrement
Forward
Backward
In EDIT Mode In Measurement Mode
Inrement
Increment the value of selected
parameters.
Decrement the value of selected
parameters.
Scrolling to the next parameter in
EDIT mode
-----------
Long push (for 3sec approx
for Scroll ON/OFF
-----------
Scrolling between different
measurements parameters.
Scrolling between different
measurements parameters.
Installation Guide Page-7
