Profile Design ERGO+ ARMREST KIT Manuale utente

Ergo+ & Race+ Armrest Kits

ERGO+ & RACE+ ARMREST KITS

REVISION 01-05-25-2022

Ergo+ & Race+ Armrest Kits

INTRODUCTION

Thank you for purchasing this Profile Design Armrest kit. These instructions apply to the Ergo+ and Race+ kits.

Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's

warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer

by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.

Note to Dealers: If you install this product for the consumer, please provide him/her with this owner’s manual after installation.

Tools and materials required:

• 4mm Hex Wrench

• Torque Wrench with a 4mm hex bit

• Grease such as Finish Line Premium Grease

Ergo+ & Race+ Armrest Kits

Your Armrest kit should contain:

WARNING: Periodically check the Armrest for damage, particularly deep scratches in the cup. Replace the armrest if you notice any damage from

use or accident.

• Two (2) armrest cups with hook & loop stickers

• Two (2) armpad cushions (foam)

• Four (4) M6x15 countersunk bolts

If anything is missing from the Armrest kit please contact your dealer.

Please note that threaded areas have been pre-treated by Profile Design during production with a special blue thread locking compound. This special

compound is easy to detect on the threads of all bolts provided. If you cannot detect this thread locking compound or you are re-installing the bolt,

re-apply a suitable blue thread locking compound as available from Loctite® or another company before assembly.

Ergo+ & Race+ Armrest Kits

COMPONENT LIST

QTY.

Req.

Part.#Ref.# Part Description

1200072Armrest - Ergo+ W/Hook Sticker Side A(Left)

2200073Armrest - Ergo+ W/Hook Sticker Side B(Right)

3685224 Pad - Ergo+/Race+ Ultra 10mm

4685221Armrest - Race+ W/Hook Sticker Side A(Left)

5685222

685222

313593

Armrest - Race+ W/Hook Sticker Side B(Right)

6Pad - Ergo+/Race+ Ultra 10-5mm2

7Bolt - M6x12 FHB w/Nylok Stainless(SUS304)4

02 03

05 06

Ergo+ & Race+ Armrest Kits

PART DRAWINGS

124 mm

108.5 mm

15 mm

18.5 mm

130 mm

108.5 mm

124 mm

94.5 mm

15 mm

18.5 mm

130 mm

108.5 mm

ERGO+ RACE+

Pad available: 10mm Pad available: Tapered - 10mm center, 5mm edge

Ergo+ & Race+ Armrest Kits

PRODUCT SPECIFIC SETUP LIMITATIONS

• The armrests are not designed to be used in the reverse position.

Ergo+ & Race+ Armrest Kits

TORQUE SETTINGS

1Armrest Bolts M6x12mm CS 4.7Nm (42 inlbf)

Ref.# Location Bolt Size Torque

Ergo+ & Race+ Armrest Kits

INSTALLATION INSTRUCTIONS

•Torque the bolts to 4.7Nm

1. Apply a light coating of grease to the surface of the armrest mount to protect

against corrosion.

2. Fasten the armrests to the brackets using the M6x15mm countersunk bolts,

note that the armrests have an offset design so care is required to ensure each

side is positioned in the same way.

3. Torque the bolts to 4.7Nm using the torque wrench.

4. Apply a light coating of grease to the surface of the bolts as a protective layer

against the effects of sweat.

5. Attach the cushion by placing carefully on hook and loop backing of the

armrest and hold firmly for 30 seconds. Repeat for the other armrest. Note

that the cushions on these models of armrest are symmetrical, so it doesn’t

matter which side each cushion is applied to.

Ergo+ & Race+ Armrest Kits

1. To fit the armrests first ensure the inner face of the armrest is free of lint and

grease, if the armrest has previously had a hook and loop sticker applied the

residue should first be removed either mechanically or with a citrus based solvent.

2. Before applying the hook and loop sticker, you may choose to wipe down the

surface with isopropyl alcohol to ensure good adhesion. Remove the backing from

the hook and loop sticker and apply it to the armrest, smoothing the sticker out to

ensure there are no air bubbles trapped under it.

3. Allow the sticker 24 hours to cure before use.

HOW TO INSTALL NEW ARMPADS

Ergo+ & Race+ Armrest Kits

ARMREST USAGE

Do not put force on the side of the armrests!

WARNING

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Profile Design Accessori per biciclette

Profile Design

Profile Design A3a Manuale utente

Profile Design

Profile Design L2 Manuale utente

Profile Design

Profile Design 35SLC Manuale utente

Profile Design

Profile Design Swiftshift Manuale utente

Profile Design

Profile Design AEROPORT Manuale utente

Profile Design

Profile Design TRI STEM Manuale utente

Profile Design

Profile Design RZ3 Manuale utente

Profile Design

Profile Design HSF Aeria Manuale utente

Profile Design

Profile Design WING20C+ Manuale utente

Profile Design

Profile Design RM Single System Manuale utente

Profile Design

Profile Design Lightning Stryke Manuale utente

Profile Design

Profile Design F-25 Armrest Kit Manuale utente

Profile Design

Profile Design Carbon X Manuale utente

Profile Design

Profile Design Carbon Stryke Manuale utente

Profile Design

Profile Design DRV SIZER BAR Manuale utente

Profile Design

Profile Design Vertex 80 Manuale utente

Profile Design

Profile Design Aeria Manuale utente

Profile Design

Profile Design Carbon X 1.5 Manuale utente

Profile Design

Profile Design Canta Zero Manuale utente

Profile Design

Profile Design AERIA ULTIMATE RACE Manuale utente

Profile Design

Profile Design T2+ DL Manuale utente

Profile Design

Profile Design Sonic Bracket Manuale utente

Profile Design

Profile Design HSF 800 HYDRATION Manuale utente

Profile Design

Profile Design Supersonic Ergo 35c Manuale utente

Manuali Accessori per biciclette popolari di altre marche

Sigma

Sigma BC 16.16 Manuale utente

Playcore

Playcore Dero Setbacks Manuale utente

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manuale utente

Cateye

Cateye RAPID X2 Manuale utente

buratti meccanica

buratti meccanica Clorofilla Trail Manuale utente

Shimano

Shimano SG-8R20 Istruzioni operative

BOB

BOB YAK Manuale utente

APLIC

APLIC 303303/20190717TW012 Manuale utente

SRAM

SRAM AXS BlipBox Manuale utente

Garmin

Garmin EDGE 500 Manuale utente

Shimano

Shimano FD-RX810 Manuale utente

Cateye

Cateye V2C - Manuale di istruzioni

KMART

KMART 43115907 Manuale utente

SIGMA SPORT

SIGMA SPORT Buster 2000 Manuale utente

NVO Components

NVO Components STEM Manuale utente

DAXYS

DAXYS BP188 Manuale utente

XLC

XLC BV-W17 Manuale utente

Deda Elementi

Deda Elementi SUPERBOX Manuale utente