Profile Design RZ3 Manuale utente

RZ3 Drink Bottle Cage

RZ3 DRINK BOTTLE CAGE

REVISION 01-12-08-2023

RZ3 Drink Bottle Cage

Thank you for purchasing this Profile Design Drink Bottle Cage. These instructions apply to the RZ3.

Note to Dealers: If you install this product for the consumer, please provide him/her with this owner’s manual after installation.

If anything is missing from the bottle kit please contact your dealer.

WARNING: Periodically check the Cage for damage, particularly for cracks or scratches in the surface that could lead to degradation and weakening

of the base material. Replace your Aerobar if you notice any damage from use or accident.

Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's

warranty policy. If you are not familiar with installation of bicycle accessories, please seek the assistance of your local Profile design dealer by logging

on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.

Tools and materials required:

Your Drink Bottle Cage kit should contain:

• Grease such as Finishline Premium Grease

• Screwdriver

• HSF 880 Bottle with top cap

• Straw with bite valve

• Aerodrink BTA bracket

INTRODUCTION

RZ3 Drink Bottle Cage

01 02

03 0504

COMPONENT LIST

Part.# Part Description

Bottle - RZ3

Cap - RZ3

Cage

Bolt - M5x14 BHB

600216

B206

414251

313598

275673 Washer

QTY.

Req.

Ref.#

RZ3 Drink Bottle Cage

PART DRAWINGS

100 mm

54 mm

220 mm

510ml (17.3oz)

RZ3 Drink Bottle Cage

-40°C+75°C

PRODUCT SPECIFIC SETUP LIMITATIONS

WARNING

Please noted, If you want to put it in the dishwasher, please

make sure that the temperature is maintained at a heat-

resistant temperature. If not, we haven't recommended to put

it in the dishwasher.

RZ3 Drink Bottle Cage

INSTALLATION INSTRUCTIONS HOW TO USE

1. Make sure there are no any bolts or the hydration system in the bike frame. If yes,

please help to remove them.

2. Apply grease to the M5x14 (2) bolts.

3. Use the bolts and washers to attach the cage to the frame.

4. Put the bottle in the cage.

1. Praise the cap off by inserting your fingers under the removal tab.

2. Fill the bottle with your choice of fluid.

3. Reinstall the cap by first lining up the bottle and cap, then pressing firmly.

* Torque the bolts to a maximum of 3Nm.

Filling the bottle

RZ3 Drink Bottle Cage

1. When pulling the bottle from the cage twist it to one side first. 2. To put the bottle back in the cage – first ensure the bottom corner is engaged, then push the bottle

down into the clips.

Warning: Pulling the bottle directly upwards risks cracking the cage.

Using the bottle

RZ3 Drink Bottle Cage

• Profile Design Worldwide Two Year Limited Warranty.

• Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received

this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more

details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit

www.profile-design.com/pages/warranty

WARRANTY POLICY

RZ3 Drink Bottle Cage

2677 El Presidio Street

Long Beach, CA 90810

Ph: 310-884-7756

ww.profile-design.com

Indice

Altri manuali Profile Design Accessori per biciclette

Profile Design

Profile Design Sonic CSX Manuale utente

Profile Design

Profile Design ERGO+ ARMREST KIT Manuale utente

Profile Design

Profile Design Aeria Manuale utente

Profile Design

Profile Design WING/20c Manuale utente

Profile Design

Profile Design RM 10 Manuale utente

Profile Design

Profile Design Supersonic Ergo 35c Manuale utente

Profile Design

Profile Design Carbon X 1.5 Manuale utente

Profile Design

Profile Design Split Second Manuale utente

Profile Design

Profile Design 43ASC Manuale utente

Profile Design

Profile Design AERIA ULTIMATE RACE Manuale utente

Profile Design

Profile Design T2+ DL Manuale utente

Profile Design

Profile Design Sonic Bracket Manuale utente

Profile Design

Profile Design A3a Manuale utente

Profile Design

Profile Design DRV SIZER BAR Manuale utente

Profile Design

Profile Design RM Single System Manuale utente

Profile Design

Profile Design 35SLC Manuale utente

Profile Design

Profile Design WING20C+ Manuale utente

Profile Design

Profile Design Vertex 80 Manuale utente

Profile Design

Profile Design HSF Aeria Manuale utente

Profile Design

Profile Design Carbon Stryke Manuale utente

Profile Design

Profile Design HSF 800 HYDRATION Manuale utente

Profile Design

Profile Design CGT Manuale utente

Profile Design

Profile Design Carbon X Manuale utente

Profile Design

Profile Design AEROPORT Manuale utente

Manuali Accessori per biciclette popolari di altre marche

Sigma

Sigma BC 16.16 Manuale utente

Playcore

Playcore Dero Setbacks Manuale utente

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manuale utente

Cateye

Cateye RAPID X2 Manuale utente

buratti meccanica

buratti meccanica Clorofilla Trail Manuale utente

Shimano

Shimano SG-8R20 Istruzioni operative

BOB

BOB YAK Manuale utente

APLIC

APLIC 303303/20190717TW012 Manuale utente

SRAM

SRAM AXS BlipBox Manuale utente

Garmin

Garmin EDGE 500 Manuale utente

Shimano

Shimano FD-RX810 Manuale utente

Cateye

Cateye V2C - Manuale di istruzioni

KMART

KMART 43115907 Manuale utente

SIGMA SPORT

SIGMA SPORT Buster 2000 Manuale utente

NVO Components

NVO Components STEM Manuale utente

DAXYS

DAXYS BP188 Manuale utente

XLC

XLC BV-W17 Manuale utente

Deda Elementi

Deda Elementi SUPERBOX Manuale utente