Pulsar Krypton 2 XQ35 Manuale utente
Manual Krypton 2 XQ/XG
Specifications
You can learn more about the main parameters here.
Model
XQ35
XG50
SKU
77374
77376
Microbolometer
Type
Uncooled
Resolution, Pixels
384x288
640x480
Pixel Pitch, µm
17
12
NETD, mK
< 25
< 40
Frame Rate, Hz
50
Optical
Characteristics
Monocular
magnification, x
3
Recommended
Daylight Optics
Magnification, x
2-6
Lens
F35/1.0
F50/1.0
Field-of-view
(Horizontal), deg/m
per 100 m
10.7/18.7
8.8/15.4
Detection Range
(animal height 1.7 m),
m/y
1300/1422
2300/2515
Minimum Focusing
Distance, m/y
5/5.5
Display
Type
AMOLED
Resolution, Pixels
1920x1080
Operational
Characteristics
Power Supply, V
3-4.2
Battery type/ Capacity/
Rated Output Voltage
Li-Ion Battery Pack IPS 7 / 6400 mAh / DC 3.7 V
External Power Supply
5 V (USB Type-C)
Max. Battery Pack Life
(at t = 22 °C), Hour*
11
Degree of protection
IP code (IEC60529)
IPX7
Compatible Pulsar
adapters
PSP-42, PSP-50, PSP-56, PSP-30B, PSP-42B,
PSP-50B, PSP-56B
Operating
temperature, °C / °F
-25 –+50 / -13 –+122
Overall Dimensions,
mm/inch
201x73x83 /
7.9x2.9x3.3
217x78x84 /
8.5x3.1x3.3
Weight (with Battery),
kg/oz
0.54 / 19
0.58 / 20.5
Video Recorder
Photo/Video
Resolution, Pixels
1244x934
Video/Photo Format
.mp4/.jpg
Built-in Memory
eMMC 16 GB
Wi-Fi Channel**
Frequency
2.4/5 GHz
Standard
IEEE 802.11 b/g/n/ac (WPA)
* Actual operating time will depend to what extent the Wi-Fi and built-in video
recorder is used.
** The reception range may vary depending on various factors: obstacles,
other Wi-Fi networks.
About the device
Description
The Krypton 2 thermal imager is designed for a variety of applications,
including hunting surveillance, security activities, day and night photo and
video shooting.
The Krypton 2 thermal imaging module can be mounted (using the correct
Ring Adapter) on to the objective lens housing of various daylight optical
devices, converting them into a highly-sensitive thermal imaging device.
To get started, see the sections:
Battery Charging
Battery Installation
Installing the Monocular on to the Thermal Imaging Module
Mounting the Adapter on the Device
Mounting the Thermal Imaging Module on the Adapter
Powering on and Image Setting
Stream Vision 2
Package Contents
•Thermal Imager
•Pulsar 3x20 B Monocular
•Single-point neck strap
•Carrying Case
•Wireless Remote Control
•IPS7 Battery Pack
•Battery Pack Charger
•Power Adapter
•USB Type-C cable with USB Type-A adapter
•USB Type-C to MicroUSB Type-B adapter
•Quick Start Guide
•Lens-Cleaning Cloth
•Warranty Card
•Allen Key S3
Components and Controls
1. Lens cover
2. Eyepiece cover
3. Battery locking lever
4. Battery pack
5. UP/REC button
6. MENU button
7. DOWN/MODE button
8. ON/OFF/Calibration button
9. Lens focus knob
10.USB Type-C port
11.Objective lens end of daylight optical device*
12.Insert**
13.Adapter**
14.Screw**
15.Tightening screw**
16.Screw**
17.Adapter lever**
18.Mount**
*Not included in the package contents
**Items of PSP B Ring Adapter (available separately)
Features
•Easily converts daylight optical devices into thermal imaging devices
•Preserves the benefits of daylight optics in night-time conditions
•Three calibration modes (manual, semi-automatic and automatic)
•3 levels of sensitivity enhancement: Normal, High, Ultra
•Compatible with a wide range of daylight optical magnifications
•Wireless remote control
•Instant start
•Display off function
•Built-in video recording
•Remote Firmware update
•Fully watertight (IPX7 protection class)
•Wide operating temperature range (-25 °С –+50°С)
Video/audio recording
•Built-in video recorder
•Integration with iOS and Android devices
•Wi-Fi Smartphone remote control and surveillance
•Storing photos and videos in Cloud when using the Stream Vision 2 App
Battery Pack
•Quick-change IPS7 Li-ion battery pack
•Charging via USB Type-C port
Power supply
Precautions
•Always use the IPS charger supplied with the device (or purchased
separately) to charge IPS batteries. Using an unsuitable charger can cause
irreparable damage to the battery and fire.
•Do not charge the battery immediately after bringing it from cold to warm. Wait
at least 30 minutes for the battery to warm up.
•Do not leave the battery unattended while charging.
•Do not use the charger if it has been modified or damaged.
•Do not leave the battery in a charger connected to the network after charging
is complete.
•Do not expose the battery to high temperatures and naked flame.
•Do not use the battery as a power source for devices that do not support IPS7
batteries.
•Do not disassemble or deform the battery.
•Do not drop or strike the battery.
•Do not submerge the battery.
•Keep the battery out of the reach of children.
Attention! Please do not use the IPS 14 Battery Pack with the Krypton 2
FXQ35/FXG50 due to the battery´s heavy weight.
Recommendations for Battery Use
•The battery should be partially charged for long-term storage –50 to 80 %.
•The battery should be charged at an ambient temperature of 0 °C…+35 °C
(+32 °F…+95° F). Otherwise, lifespan of the battery will decrease significantly.
•When using the battery at sub-zero temperatures, the battery capacity
decreases, this is normal and not a defect.
•Do not use the battery at temperatures outside the range of -25 °С...+50 °С (-
13 °F…+122 °F) – this may reduce battery’s life.
•The battery has a short-circuit protection. However, any situation that may
cause short-circuiting should be avoided.
Battery Charging
The device is supplied with a rechargeable IPS7 Lithium-ion Battery Pack
which allows the device to be used for up to 11 hours. Charge the battery
before first use.
The icon in the status bar will flash when the battery is low. The battery
needs to be charged.
Option 1
1. Install the IPS7 battery (4) in the battery compartment of the device.
2. Connect the USB Type-C cable (20) to the USB Type-C connector (10) of the
device.
3. Connect the other end of the USB cable (20) to the Power Adapter (21) by
removing the USB Type-A adapter.
4. Plug the Power Adapter (21) into a 100-240 V socket.
5. Wait until the battery is fully charged (indication in the status bar: ).
If the device is off, the LED indicator will display the battery charge
status:
LED indication
Battery status
Battery is charging
Battery is charged
Defective battery. Do not use the
battery!
-
The device is switched on
Option 2
Charging
Step 1. Install the battery into the charger
1. Move the lever (3) to the open position .
2. Install the Battery Pack (4) into the charger.
3. Lock the battery (4) by moving the lever to the closed position .
Step 2. Сheck the current battery level
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Pulsar Monoculare
Pulsar
Pulsar AXION LRF XQ38 Manuale utente
Pulsar
Pulsar FORWARD F455 Manuale utente
Pulsar
Pulsar KRYPTON FXG50 Manuale utente
Pulsar
Pulsar KRYPTON XG50 Manuale utente
Pulsar
Pulsar Axion 2 LRF XQ35 Manuale utente
Pulsar
Pulsar XQ30 Manuale utente
Pulsar
Pulsar Quantum LiteX Q23V Manuale utente
Pulsar
Pulsar TELOS LRF XP50 Manuale utente
Pulsar
Pulsar AXION XQ Series Manuale utente
Pulsar
Pulsar Helion 2 XQ Manuale utente
Pulsar
Pulsar Forward FN155 Manuale utente
Pulsar
Pulsar 3x20 B Manuale utente
Pulsar
Pulsar IM256PU Manuale utente
Pulsar
Pulsar AXION XM30 Manuale utente
Pulsar
Pulsar Quantum LQ19 Manuale utente
Pulsar
Pulsar Axion F Series Manuale utente
Pulsar
Pulsar HELION 2 XP50 PRO Manuale utente
Pulsar
Pulsar Krypton XG Manuale utente
Pulsar
Pulsar AXION X?30 Manuale utente
Pulsar
Pulsar 78199 Manuale utente
